Ry’s Objective-C Tutorial → Data Types---C Primitives

• Tutorials 
• Purchases 
• About

You’re reading Ry’s Objective-C Tutorial → Data Types

C Primitives

The vast majority of Objective-C’s primitive data types are adopted from C, although it does define a few of its own to facilitate its object-oriented capabilities. The first part of this module provides a practical introduction to C’s data types, and the second part covers three more primitives that are specific to Objective-C.

The examples in this module use NSLog() to inspect variables. In order for them to display correctly, you need to use the correct format specifier in NSLog()’s first argument. The various specifiers for C primitives are presented alongside the data types themselves, and all Objective-C objects can be displayed with the %@ specifier.

The void Type

The void type is C’s empty data type. Its most common use case is to specify the return type for functions that don’t return anything. For example:

void sayHello() {    NSLog(@"This function doesn't return anything");}

The void type is not to be confused with the void pointer. The former indicates the absence of a value, while the latter represents any value (well, any pointer, at least).

Integer Types

Integer data types are characterized by their size and whether they are signed or unsigned. The char type is always 1 byte, but it’s very important to understand that the exact size of the other integer types is implementation-dependent. Instead of being defined as an absolutenumber of bytes, they are defined relative to each other. The only guarantee is that short <= int <= long <= long long; however it is possible to determine their exact sizes at runtime.

C was designed to work closely with the underlying architecture, and different systems support different variable sizes. A relative definition provides the flexibility to, for example, define short, int, and long as the same number of bytes when the target chipset can’t differentiate between them.

BOOL isBool = YES;NSLog(@"%d", isBool);NSLog(@"%@", isBool ? @"YES" : @"NO");char aChar = 'a';unsigned char anUnsignedChar = 255;NSLog(@"The letter %c is ASCII number %hhd", aChar, aChar);NSLog(@"%hhu", anUnsignedChar);   short aShort = -32768;unsigned short anUnsignedShort = 65535;NSLog(@"%hd", aShort);NSLog(@"%hu", anUnsignedShort);int anInt = -2147483648;unsigned int anUnsignedInt = 4294967295;NSLog(@"%d", anInt);NSLog(@"%u", anUnsignedInt);long aLong = -9223372036854775808;unsigned long anUnsignedLong = 18446744073709551615;NSLog(@"%ld", aLong);NSLog(@"%lu", anUnsignedLong);long long aLongLong = -9223372036854775808;unsigned long long anUnsignedLongLong = 18446744073709551615;NSLog(@"%lld", aLongLong);NSLog(@"%llu", anUnsignedLongLong);

The %d and %u characters are the core specifiers for displaying signed and unsigned integers, respectively. The hh, h, l and ll characters are modifiers that tell NSLog() to treat the associated integer as a char, short, long, or long long, respectively.

It’s also worth noting that the BOOL type is actually part of Objective-C, not C. Objective-C uses YES and NO for its Boolean values instead of the true and false macros used by C.

Fixed-Width Integers

While the basic types presented above are satisfactory for most purposes, it is sometimes necessary to declare a variable that stores a specific number of bytes. This is particularly relevant for algorithms like arc4random() that operate on a fixed-width integer.

The int<n>_t data types allow you to represent signed and unsigned integers that are exactly 1, 2, 4, or 8 bytes, and the int_least<n>_tvariants let you constrain the minimum size of a variable without specifying an exact number of bytes. In addition, intmax_t is an alias for the largest integer type that the system can handle.

// Exact integer typesint8_t aOneByteInt = 127;uint8_t aOneByteUnsignedInt = 255;int16_t aTwoByteInt = 32767;uint16_t aTwoByteUnsignedInt = 65535;int32_t aFourByteInt = 2147483647;uint32_t aFourByteUnsignedInt = 4294967295;int64_t anEightByteInt = 9223372036854775807;uint64_t anEightByteUnsignedInt = 18446744073709551615;// Minimum integer typesint_least8_t aTinyInt = 127;uint_least8_t aTinyUnsignedInt = 255;int_least16_t aMediumInt = 32767;uint_least16_t aMediumUnsignedInt = 65535;int_least32_t aNormalInt = 2147483647;uint_least32_t aNormalUnsignedInt = 4294967295;int_least64_t aBigInt = 9223372036854775807;uint_least64_t aBigUnsignedInt = 18446744073709551615;// The largest supported integer typeintmax_t theBiggestInt = 9223372036854775807;uintmax_t theBiggestUnsignedInt = 18446744073709551615;

Floating-Point Types

C provides three floating-point types. Like the integer data types, they are defined as relative sizes, where float <= double <= long double. Literal decimal values are represented as doubles—floats must be explicitly marked with a trailing f, and long doubles must be marked with an L, as shown below.

// Single precision floating-pointfloat aFloat = -21.09f;NSLog(@"%f", aFloat);NSLog(@"%8.2f", aFloat);// Double precision floating-pointdouble aDouble = -21.09;NSLog(@"%8.2f", aDouble);NSLog(@"%e", aDouble);// Extended precision floating-pointlong double aLongDouble = -21.09e8L;NSLog(@"%Lf", aLongDouble);NSLog(@"%Le", aLongDouble);

The %f format specifier is used to display floats and doubles as decimal values, and the %8.2f syntax determines the padding and the number of points after the decimal. In this case, we pad the output to fill 8 digits and display 2 decimal places. Alternatively, you can format the value as scientific notation with the %e specifier. Long doubles require the Lmodifier (similar to hh, l, etc).

Determining Type Sizes

It’s possible to determine the exact size of any data type by passing it to the sizeof() function, which returns the number of bytes used to represent the specified type. Running the following snippet is an easy way to see the size of the basic data types on any given architecture.

NSLog(@"Size of char: %zu", sizeof(char));   // This will always be 1NSLog(@"Size of short: %zu", sizeof(short));NSLog(@"Size of int: %zu", sizeof(int));NSLog(@"Size of long: %zu", sizeof(long));NSLog(@"Size of long long: %zu", sizeof(long long));NSLog(@"Size of float: %zu", sizeof(float));NSLog(@"Size of double: %zu", sizeof(double));NSLog(@"Size of size_t: %zu", sizeof(size_t));

Note that sizeof() can also be used with an array, in which case it returns the number of bytes used by the array. This presents a new problem: the programmer has no idea which data type is required to store the maximum size of an array. Instead of forcing you to guess, thesizeof() function returns a special data type called size_t. This is why we used the %zu format specifier in the above example.

The size_t type is dedicated solely to representing memory-related values, and it is guaranteed to be able to store the maximum size of an array. Aside from being the return type for sizeof() and other memory utilities, this makes size_t an appropriate data type for storing the indices of very large arrays. As with any other type, you can pass it to sizeof() to get its exact size at runtime, as shown in the above example.

If your Objective-C programs interact with a lot of C libraries, you’re likely to encounter the following application of sizeof():

size_t numberOfElements = sizeof(anArray)/sizeof(anArray[0]);

This is the canonical way to determine the number of elements in a primitive C array. It simply divides the size of the array,sizeof(anArray), by the size of each element, sizeof(anArray[0]).

Limit Macros

While it’s trivial to determine the potential range of an integer type once you know how how many bytes it is, C implementations provide convenient macros for accessing the minimum and maximum values that each type can represent:

NSLog(@"Smallest signed char: %d", SCHAR_MIN);NSLog(@"Largest signed char: %d", SCHAR_MAX);NSLog(@"Largest unsigned char: %u", UCHAR_MAX);NSLog(@"Smallest signed short: %d", SHRT_MIN);NSLog(@"Largest signed short: %d", SHRT_MAX);NSLog(@"Largest unsigned short: %u", USHRT_MAX);NSLog(@"Smallest signed int: %d", INT_MIN);NSLog(@"Largest signed int: %d", INT_MAX);NSLog(@"Largest unsigned int: %u", UINT_MAX);NSLog(@"Smallest signed long: %ld", LONG_MIN);NSLog(@"Largest signed long: %ld", LONG_MAX);NSLog(@"Largest unsigned long: %lu", ULONG_MAX);NSLog(@"Smallest signed long long: %lld", LLONG_MIN);NSLog(@"Largest signed long long: %lld", LLONG_MAX);NSLog(@"Largest unsigned long long: %llu", ULLONG_MAX);NSLog(@"Smallest float: %e", FLT_MIN);NSLog(@"Largest float: %e", FLT_MAX);NSLog(@"Smallest double: %e", DBL_MIN);NSLog(@"Largest double: %e", DBL_MAX);NSLog(@"Largest possible array index: %llu", SIZE_MAX);

The SIZE_MAX macro defines the maximum value that can be stored in a size_t variable.

Working With C Primitives

This section takes a look at some common “gotchas“ when working with C’s primitive data types. Keep in mind that these are merely brief overviews of computational topics that often involve a great deal of subtlety.

Choosing an Integer Type

The variety of integer types offered by C can make it hard to know which one to use in any given situation, but the answer is quite simple: use int’s unless you have a compelling reason not to.

Traditionally, an int is defined to be the native word size of the underlying architecture, so it’s (generally) the most efficient integer type. The only reason to use a short is when you want to reduce the memory footprint of very large arrays (e.g., an OpenGL index buffer). The long types should only be used when you need to store values that don’t fit into an int.

Integer Division

Like most programming languages, C differentiates between integer and floating-point operations. If both operands are integers, the calculation uses integer arithmetic, but if at least one of them is a floating-point type, it uses floating-point arithmetic. This is important to keep in mind for division:

int integerResult = 5 / 4;NSLog(@"Integer division: %d", integerResult);        // 1double doubleResult = 5.0 / 4;NSLog(@"Floating-point division: %f", doubleResult);  // 1.25

Note that the decimal will always be truncated when dividing two integers, so be sure to use (or cast to) a float or a double if you need the remainder.

Floating-Point Equality

Floating-point numbers are inherently not precise, and certain values simply cannot be represented as a floating-point value. For example, we can inspect the imprecision of the number 0.1 by displaying several decimal places:

NSLog(@"%.17f", .1);        // 0.10000000000000001

As you can see, 0.1 is not actually represented as 0.1 by your computer. That extra 1 in the 17th digit occurs because converting 1/10to binary results in a repeating decimal. Of course, a computer cannot store the infinitely many digits required for the exact value, so this introduces a rounding error. The error gets magnified when you start doing calculations with the value, resulting in counterintuitive situations like the following:

NSLog(@"%.17f", 4.2 - 4.1); // 0.10000000000000053if (4.2 - 4.1 == .1) {    NSLog(@"This math is perfect!");} else {    // You'll see this message    NSLog(@"This math is just a tiny bit off...");}

The lesson here is: don’t try to check if two floating-point values are exactly equal, and definitely don’t use a floating-point type to store precision-sensitive data (e.g., monetary values). To represent exact quantities, you should use the fixed-point NSDecimalNumber class.

For a comprehensive discussion of the issues surrounding floating-point math, please see What Every Computer Scientist Should Know About Floating-Point Arithmetic by David Goldberg.

Objective-C Primitives

In addition to the data types discussed above, Objective-C defines three of its own primitive types: id, Class, and SEL. These are the basis for Objective-C’s dynamic typing capabilities. This section also introduces the anomalous NSInteger and NSUInteger types.

The id Type

The id type is the generic type for all Objective-C objects. You can think of it as the object-oriented version of C’s void pointer. And, like a void pointer, it can store a reference to any type of object. The following example uses the same id variable to hold a string and a dictionary.

id mysteryObject = @"An NSString object";NSLog(@"%@", [mysteryObject description]);mysteryObject = @{@"model": @"Ford", @"year": @1967};NSLog(@"%@", [mysteryObject description]);

Recall that all Objective-C objects are referenced as pointers, so when they are statically typed, they must be declared with pointer notation:NSString *mysteryObject. However, the id type automatically implies that the variable is a pointer, so this is not necessary: id mysteryObject(without the asterisk).

The Class Type

Objective-C classes are represented as objects themselves, using a special data type called Class. This lets you, for example, dynamically check an object’s type at runtime:

Class targetClass = [NSString class];id mysteryObject = @"An NSString object";if ([mysteryObject isKindOfClass:targetClass]) {    NSLog(@"Yup! That's an instance of the target class");}

All classes implement a class-level method called class that returns its associated class object (apologies for the redundant terminology). This object can be used for introspection, which we see with theisKindOfClass: method above.

The SEL Type

The SEL data type is used to store selectors, which are Objective-C’s internal representation of a method name. For example, the following snippet stores a method called sayHello in the someMethod variable. This variable could be used to dynamically call a method at runtime.

SEL someMethod = @selector(sayHello);

Please refer to the Methods module for a thorough discussion of Objective-C’s selectors.

NSInteger and NSUInteger

While they aren’t technically native Objective-C types, this is a good time to discuss the Foundation Framework’s custom integers, NSIntegerand NSUInteger. On 32-bit systems, these are defined to be 32-bit signed/unsigned integers, respectively, and on 64-bit systems, they are 64-bit integers. In other words, they are guaranteed to be the natural word size on any given architecture.

The original purpose of these Apple-specific types was to facilitate the transition from 32-bit architectures to 64-bit, but it’s up to you whether or not you want to use NSInteger over the basic types (int, long, long long) and the int<n>_t variants. A sensible convention is to useNSInteger and NSUInteger when interacting with Apple’s APIs and use the standard C types for everything else.

Either way, it’s still important to understand what NSInteger and NSUInteger represent, as they are used extensively in Foundation, UIKit, and several other frameworks.

 

Mailing List

Sign up for my low-volume mailing list to find out when new content is released. Next up is a comprehensive Swift tutorial planned for late January.

Email Address:

You’ll only receive emails when new tutorials are released, and your contact information will never be shared with third parties. Click here to unsubscribe.

• © 2012-2014 
• RyPress.com 
• All Rights Reserved 
• Terms of Service 
• Privacy Policy