Wi-Fi: IEEE Std 802.11-2012

来源:互联网 发布:介绍人工智能方面的书 编辑:程序博客网 时间:2024/04/30 10:03


https://en.wikipedia.org/wiki/IEEE_802.11


Within the IEEE 802.11 Working Group, the following IEEE Standards Association Standard and Amendments exist:


IEEE 802.11-1997: The WLAN standard was originally 1 Mbit/s and 2 Mbit/s, 2.4 GHz RF and infrared (IR) standard (1997), all the others listed below are Amendments to this standard, except for Recommended Practices 802.11F and 802.11T.

IEEE 802.11a: 54 Mbit/s, 5 GHz standard (1999, shipping products in 2001)
IEEE 802.11b: Enhancements to 802.11 to support 5.5 Mbit/s and 11 Mbit/s (1999)
IEEE 802.11c: Bridge operation procedures; included in the IEEE 802.1D standard (2001)
IEEE 802.11d: International (country-to-country) roaming extensions (2001)
IEEE 802.11e: Enhancements: QoS, including packet bursting (2005)
IEEE 802.11F: Inter-Access Point Protocol (2003) Withdrawn February 2006
IEEE 802.11g: 54 Mbit/s, 2.4 GHz standard (backwards compatible with b) (2003)
IEEE 802.11h: Spectrum Managed 802.11a (5 GHz) for European compatibility (2004)
IEEE 802.11i: Enhanced security (2004)
IEEE 802.11j: Extensions for Japan (2004)


IEEE 802.11-2007: A new release of the standard that includes amendments a, b, d, e, g, h, i, and j. (July 2007)

IEEE 802.11k: Radio resource measurement enhancements (2008)
IEEE 802.11n: Higher-throughput improvements using MIMO (multiple-input, multiple-output antennas) (September 2009)
IEEE 802.11p: WAVE—Wireless Access for the Vehicular Environment (such as ambulances and passenger cars) (July 2010)
IEEE 802.11r: Fast BSS transition (FT) (2008)
IEEE 802.11s: Mesh Networking, Extended Service Set (ESS) (July 2011)
IEEE 802.11T: Wireless Performance Prediction (WPP)—test methods and metrics Recommendation cancelled
IEEE 802.11u: Improvements related to HotSpots and 3rd-party authorization of clients, e.g., cellular network offload (February 2011)
IEEE 802.11v: Wireless network management (February 2011)
IEEE 802.11w: Protected Management Frames (September 2009)
IEEE 802.11y: 3650–3700 MHz Operation in the U.S. (2008)
IEEE 802.11z: Extensions to Direct Link Setup (DLS) (September 2010)


IEEE 802.11-2012: A new release of the standard that includes amendments k, n, p, r, s, u, v, w, y, and z (March 2012)

IEEE 802.11aa: Robust streaming of Audio Video Transport Streams (June 2012)
IEEE 802.11ac: Very High Throughput <6 GHz;[46] potential improvements over 802.11n: better modulation scheme (expected ~10% throughput increase), wider channels (estimate in future time 80 to 160 MHz), multi user MIMO;[47] (December 2013)
IEEE 802.11ad: Very High Throughput 60 GHz (December 2012) — see WiGig
IEEE 802.11ae: Prioritization of Management Frames (March 2012)
IEEE 802.11af: TV Whitespace (February 2014)


In process
IEEE 802.11mc: Roll-up of 802.11-2012 with the aa, ac, ad, ae & af amendments to be published as 802.11-2016 (~ March 2016)
IEEE 802.11ah: Sub 1 GHz license exempt operation (e.g., sensor network, smart metering) (~ March 2016)
IEEE 802.11ai: Fast Initial Link Setup (~ November 2015)
IEEE 802.11aj: China Millimeter Wave (~ June 2016)
IEEE 802.11ak: General Links (~ May 2016)
IEEE 802.11aq: Pre-association Discovery (~ July 2016)
IEEE 802.11ax: High Efficiency WLAN (~ May 2018)
IEEE 802.11ay: Enhancements for Ultra High Throughput in and around the 60 GHz Band (~ TBD)
IEEE 802.11az: Next Generation Positioning (~ TBD)



下载地址:http://standards.ieee.org/about/get/802/802.11.html


全家族


* IEEE 802.11,1997年,原始标准(2Mbit/s,工作在2.4GHz)。
* IEEE 802.11a,1999年,物理层补充(54Mbit/s,工作在5GHz)。
* IEEE 802.11b,1999年,物理层补充(11Mbit/s,工作在2.4GHz)。
* IEEE 802.11c,符合802.1D的媒体接入控制层桥接(MAC Layer Bridging)。
* IEEE 802.11d,根据各国无线电规定做的调整。
* IEEE 802.11e,对服务等级(Quality of Service,QoS)的支持。
* IEEE 802.11f,基站的互连性(IAPP,Inter-Access Point Protocol),2006年2月被IEEE批准撤销。
* IEEE 802.11g,2003年,物理层补充(54Mbit/s,工作在2.4GHz)。
* IEEE 802.11h,2004年,无线覆盖半径的调整,室内(indoor)和室外(outdoor)信道(5GHz频段)。
* IEEE 802.11i,2004年,无线网络的安全方面的补充。
* IEEE 802.11j,2004年,根据日本规定做的升级。
* IEEE 802.11l,预留及准备不使用。
* IEEE 802.11m,维护标准;互斥及极限。
* IEEE 802.11n,2009年9月通过正式标准,WLAN的传输速率由802.11a及802.11g提供的54Mbps、108Mbps,提高达350Mbps甚至高达475Mbps。
* IEEE 802.11p,2010年,这个通讯协定主要用在车用电子的无线通讯上。
* IEEE 802.11k,2008年,该协议规范规定了无线局域网络频谱测量规范。该规范的制订体现了无线局域网络对频谱资源智能化使用的需求。
* IEEE 802.11r,2008年,快速基础服务转移,主要是用来解决客户端在不同无线网络AP间切换时的延迟问题。
* IEEE 802.11s,2007年9月.拓扑发现、路径选择与转发、信道定位、安全、流量管理和网络管理。网状网络带来一些新的术语。
* IEEE 802.11w,2009年,针对802.11管理帧的保护。
* IEEE 802.11x,包括802.11a/b/g等三个标准。
* IEEE 802.11y,2008年,针对美国3650–3700 MHz 的规定。
* IEEE 802.11ac,802.11n之后的版本。工作在5G频段,理论上可以提供高达每秒1Gbit的数据传输能力。


除了上面的IEEE标准,另外有一个被称为IEEE802.11b+的技术,通过PBCC技术(Packet Binary Convolutional Code)在IEEE 802.11b(2.4GHz频段) 基础上提供22Mbit/s的数据传输速率。但这事实上并不是一个IEEE的公开标准,而是一项产权私有的技术,产权属于美国德州仪器公司。


【长度固定的element】

Authentication Algorithm Number

长度:2 byte

描述:此位代表连接发生之前802.11层次(802.11-level)的最初认证程序所使用的认证类型。

取值:0=开放系统认证,1=共享密钥认证


Authentication Transaction Sequence Number

长度:2 byte

描述:身份认证程序分为好几个步骤,用以追踪身份认证的进度。

取值:1~65535


Beacon interval

长度:2 byte

描述:设定Beacon信号之间相隔多少时间单位,单位毫秒。

取值:1~65535


Capability information

长度:2 byte

描述:用来通知各方,该网络具备哪种性能。(如beacon,probe req,probe resp)

取值:1~65535


Current AP Address

长度:6 byte

描述:移动工作站用来表明所连接的基站的MAC地址。(如association,reassociation)

取值:1~65535


Listen interval

长度:2 byte

描述:为了节省电池的电力。当工作站处于休眠状态,基站必须为之暂存帧。

取值:1~65535


Association ID

长度:2 byte

描述:当工作站与基站连接时,会被赋予一个连接识别码,14个bit。

取值:1~2007


Timestamp

长度:8 byte

描述:用来同步BSS中的工作站。

取值:


Reason Code

长度:2 byte

描述:当对方不适合加入网络时,工作站会送出Disassociation或Deauthentication帧作为应答,包含了这个原因代码。

取值:...


Status Code

长度:2 byte

描述:用来表示某项过程成功或失败。

取值:0=成功,其他分别代表不同状态。


【长度不定的element】

Element ID (1 Byte) | Length (1 Byte) | Content

共256种长度不定的Element,每种Element最大长度256Byte。

常用的介绍如下。


0. SSID

1. Supported rates

2. FH Parameter Set

描述:跳频(Frequency Hopping)参数组合。包含了加入802.11跳频网络所需要的参数。


3. DS Parameter Set

描述:直接序列参数集合。802.11直接序列(Direct Sequence)网络只有一个参数:网络所使用的信道数。


4. CF Parameter Set

描述:免竞争参数组合。出现在支持免竞争基站所发送的Beacon帧中。


5. TIM

描述:数据待传信息(Traffic Indication Map)。基站为处于休睡状态的工作站暂存帧,每隔一段时间,基站就会尝试传递这些暂存帧给休眠中的工作站。


36. Supported Channels

37. Channel Switch Announcement

描述:802.11h为网络加入了动态切换信道的能力。


42. ERP

描述:扩展速率物理层Extended Rate PHY。为了兼容早期产品


45. HT Capabilities

描述:高吞吐量能力High Throughput Capabilities


48. RSN

描述:Robust Security Network


50. Extended Supported Rates

60. Extended Channel Switch Announcement


61. HT Operation

描述:高吞吐量操作High Throughput Operation


221. Vendor Specific



0 0