CAAnimation解读

---

CAAnimation是一个抽象类，遵循了CAMediaTiming协议和CAAction协议！我们不要直接使用CAAnimation类，而是使用其子类：

• CATransition：提供渐变效果，如推拉push效果,消退fade效果,揭开reveal效果
• CAAnimationGroup：允许多个动画同时播放
• CABasicAnimation： 提供了对单一动画的实现
• CAKeyframeAnimation： 关键桢动画,可以定义动画路线
• CAPropertyAnimation：属性动画，通常不直接使用，而是使用CABasicAnimation子类

创建对象

---

我们看到有一个工厂方法来创建CAAnimation对象，因此，我们通常都使用这个方法来创建动画：

+ (instancetype)animation;

当然不同类型的子类使用的方法不一样，对于继承于CAPropertyAnimation的子类，都可以通过属性路径来创建：

/* Creates a new animation object with its `keyPath' property set to * 'path'. */+ (instancetype)animationWithKeyPath:(nullable NSString *)path;

遵守了CAMediaTiming协议

---

这个协议是是用于配置动画的相关属性的，英文部分是官方的注释，中文部分为笔者的理解，下面一一讲解：

/* The begin time of the object, in relation to its parent object, if * applicable. Defaults to 0. */// 获取或设置动画的开始时间，默认为0@property CFTimeInterval beginTime;/* The basic duration of the object. Defaults to 0. */// 获取或设置动画的时长，也就是整个动画的总时长@property CFTimeInterval duration;/* The rate of the layer. Used to scale parent time to local time, e.g. * if rate is 2, local time progresses twice as fast as parent time. * Defaults to 1. */// 获取或设置动画的播放速度，默认为1，若设置为2，则以两倍的速度播放。// 如果设置小于1，则相当于慢放。@property float speed;/* Additional offset in active local time. i.e. to convert from parent * time tp to active local time t: t = (tp - begin) * speed + offset. * One use of this is to "pause" a layer by setting `speed' to zero and * `offset' to a suitable value. Defaults to 0. */// 获取或设置当前播放的进度，默认为0。有这么一种使用场景：设置speed为0，// 然后设置这个timeOffset为合适的值，就可以暂停动画了@property CFTimeInterval timeOffset;/* The repeat count of the object. May be fractional. Defaults to 0. */// 获取或设置动画播放次数，默认为0表示只播放一次。// 设置为HUGE_VALF表示无限制播放次数@property float repeatCount;/* The repeat duration of the object. Defaults to 0. */// 获取或设置重复播放的动画时长，不要与repeatCount混合使用@property CFTimeInterval repeatDuration;/* When true, the object plays backwards after playing forwards. Defaults * to NO. */// 获取或设置是否回放。// 如果设置为YES，在动画播放完成时，就会以动画的效果回到起点// 如果设置为NO，播放完成时，就会停留在终点@property BOOL autoreverses;/* Defines how the timed object behaves outside its active duration. * Local time may be clamped to either end of the active duration, or * the element may be removed from the presentation. The legal values * are `backwards', `forwards', `both' and `removed'. Defaults to * `removed'. */// 获取或设置动画完成时的动作// forwards表示动画完成时，也回到起点而不是留在终点// backwards表示动画完成时，就停留在终点// removed表示完成时就移除，默认就是removed@property(copy) NSString *fillMode;

遵守了CAAction协议

---

这个协议只有一个方法，我们可以调用此方法来触发指定的事件，这样接收者就可以接收到代理。

/* Called to trigger the event named 'path' on the receiver. The object * (e.g. the layer) on which the event happened is 'anObject'. The * arguments dictionary may be nil, if non-nil it carries parameters * associated with the event. */- (void)runActionForKey:(NSString *)event                  object:(id)anObject              arguments:(nullable NSDictionary *)dict;

CAAnimationDelegate代理

---

CAAnimation为这么个属性：

/* The delegate of the animation. This object is retained for the * lifetime of the animation object. Defaults to nil. See below for the * supported delegate methods. */@property(nullable, strong) id delegate;

我们只要指定了代理，就可以实现这两个代理方法：

/* Called when the animation begins its active duration. */// 动画开始时的回调- (void)animationDidStart:(CAAnimation *)anim;/* Called when the animation either completes its active duration or * is removed from the object it is attached to (i.e. the layer). 'flag' * is true if the animation reached the end of its active duration * without being removed. */// 动画停止的回调，可以通过flag判断动画是否是完成还是暂停- (void)animationDidStop:(CAAnimation *)anim finished:(BOOL)flag;

removedOnCompletion属性

---

当我们动画完成时，如果希望动画就自动移除的话，我们可以设置此属性为YES，默认值为YES。如果我们想要循环或者执行多次动画，就将此属性设置为NO

/* When true, the animation is removed from the render tree once its * active duration has passed. Defaults to YES. */// 当duration值已经达到时，是否将动画自动从渲染树上移除@property(getter=isRemovedOnCompletion) BOOL removedOnCompletion;

timingFunction属性

---

这个属性是用于指定动画移动的步调是什么样式，比如线性。

/* A timing function defining the pacing of the animation. Defaults to * nil indicating linear pacing. */@property(nullable, strong) CAMediaTimingFunction *timingFunction;

关于CAMediaTimingFunction类，主要是这向个方法。当创建时，我们+functionWithName:工厂方法来创建系统已经提供的样式。

/* A convenience method for creating common timing functions. The * currently supported names are `linear', `easeIn', `easeOut' and * `easeInEaseOut' and `default' (the curve used by implicit animations * created by Core Animation). */+ (instancetype)functionWithName:(NSString *)name;

其中这个name有这几个变量对应的：

// 线性动画CA_EXTERN NSString * const kCAMediaTimingFunctionLinear    __OSX_AVAILABLE_STARTING (__MAC_10_5, __IPHONE_2_0);// 快速进入动画CA_EXTERN NSString * const kCAMediaTimingFunctionEaseIn    __OSX_AVAILABLE_STARTING (__MAC_10_5, __IPHONE_2_0);// 快速出来动画CA_EXTERN NSString * const kCAMediaTimingFunctionEaseOut    __OSX_AVAILABLE_STARTING (__MAC_10_5, __IPHONE_2_0);// 快速进入出来动画CA_EXTERN NSString * const kCAMediaTimingFunctionEaseInEaseOut    __OSX_AVAILABLE_STARTING (__MAC_10_5, __IPHONE_2_0);// 默认动画是curve动画，也就是曲线动画CA_EXTERN NSString * const kCAMediaTimingFunctionDefault    __OSX_AVAILABLE_STARTING (__MAC_10_6, __IPHONE_3_0);

如果我们想要让其移动动画是按贝塞尔曲线的路径行动，那么可以用这两个方法来创建：

/* Creates a timing function modelled on a cubic Bezier curve. The end * points of the curve are at (0,0) and (1,1), the two points 'c1' and * 'c2' defined by the class instance are the control points. Thus the * points defining the Bezier curve are: '[(0,0), c1, c2, (1,1)]' */+ (instancetype)functionWithControlPoints:(float)c1x :(float)c1y :(float)c2x :(float)c2y;- (instancetype)initWithControlPoints:(float)c1x :(float)c1y :(float)c2x :(float)c2y;

阅读原文

关注我

---

微信公众号：iOSDevShares
有问必答QQ群：324400294