LVS基本命令详解
来源:互联网 发布:无锡大数据it 编辑:程序博客网 时间:2024/06/07 23:27
[root@chen ~]# ipvsadm -helpipvsadm v1.26 2008/5/15 (compiled with popt and IPVS v1.2.1)Usage: ipvsadm -A|E -t|u|f service-address [-s scheduler] [-p [timeout]] [-M netmask] [--pe persistence_engine] ipvsadm -D -t|u|f service-address ipvsadm -C ipvsadm -R ipvsadm -S [-n] ipvsadm -a|e -t|u|f service-address -r server-address [options] ipvsadm -d -t|u|f service-address -r server-address ipvsadm -L|l [options] ipvsadm -Z [-t|u|f service-address] ipvsadm --set tcp tcpfin udp ipvsadm --start-daemon state [--mcast-interface interface] [--syncid sid] ipvsadm --stop-daemon state ipvsadm -hCommands:Either long or short options are allowed. --add-service -A add virtual service with options --edit-service -E edit virtual service with options --delete-service -D delete virtual service --clear -C clear the whole table --restore -R restore rules from stdin --save -S save rules to stdout --add-server -a add real server with options --edit-server -e edit real server with options --delete-server -d delete real server --list -L|-l list the table --zero -Z zero counters in a service or all services --set tcp tcpfin udp set connection timeout values --start-daemon start connection sync daemon --stop-daemon stop connection sync daemon --help -h display this help messageOptions: --tcp-service -t service-address service-address is host[:port] --udp-service -u service-address service-address is host[:port] --fwmark-service -f fwmark fwmark is an integer greater than zero --ipv6 -6 fwmark entry uses IPv6 --scheduler -s scheduler one of rr|wrr|lc|wlc|lblc|lblcr|dh|sh|sed|nq, the default scheduler is wlc. --pe engine alternate persistence engine may be sip, not set by default. --persistent -p [timeout] persistent service --netmask -M netmask persistent granularity mask --real-server -r server-address server-address is host (and port) --gatewaying -g gatewaying (direct routing) (default) --ipip -i ipip encapsulation (tunneling) --masquerading -m masquerading (NAT) --weight -w weight capacity of real server --u-threshold -x uthreshold upper threshold of connections --l-threshold -y lthreshold lower threshold of connections --mcast-interface interface multicast interface for connection sync --syncid sid syncid for connection sync (default=255) --connection -c output of current IPVS connections --timeout output of timeout (tcp tcpfin udp) --daemon output of daemon information --stats output of statistics information --rate output of rate information --exact expand numbers (display exact values) --thresholds output of thresholds information --persistent-conn output of persistent connection info --nosort disable sorting output of service/server entries --sort does nothing, for backwards compatibility --ops -o one-packet scheduling --numeric -n numeric output of addresses and portsipvsadm有两种命令选项格式,长的和短的,具有相同的意思。在实际使用时,两种都可以。
-A –add-service 在内核的虚拟服务器表中添加一条新的虚拟服务器记录。也就是增加一台新的虚拟服务器。
-E –edit-service 编辑内核虚拟服务器表中的一条虚拟服务器记录。
-D –delete-service 删除内核虚拟服务器表中的一条虚拟服务器记录。
-C –clear 清除内核虚拟服务器表中的所有记录。
-R –restore 恢复虚拟服务器规则
-S –save 保存虚拟服务器规则,输出为-R 选项可读的格式
-a –add-server 在内核虚拟服务器表的一条记录里添加一条新的真实服务器记录。也就是在一个虚拟服务器中增加一台新的真实服务器
-e –edit-server 编辑一条虚拟服务器记录中的某条真实服务器记录
-d –delete-server 删除一条虚拟服务器记录中的某条真实服务器记录
-L|-l –list 显示内核虚拟服务器表
-Z –zero 虚拟服务表计数器清零(清空当前的连接数量等)
–set tcp tcpfin udp 设置连接超时值
–start-daemon 启动同步守护进程。他后面可以是master 或backup,用来说明LVS Router 是master 或是backup。在这个功能上也可以采用keepalived 的VRRP 功能。
–stop-daemon 停止同步守护进程
-h –help 显示帮助信息
其他的选项:
-t –tcp-service service-address 说明虚拟服务器提供的是tcp 的服务
[vip:port] or [real-server-ip:port]
-u –udp-service service-address 说明虚拟服务器提供的是udp 的服务
[vip:port] or [real-server-ip:port]
-f –fwmark-service fwmark 说明是经过iptables 标记过的服务类型。
-s –scheduler scheduler 使用的调度算法,有这样几个选项rr|wrr|lc|wlc|lblc|lblcr|dh|sh|sed|nq,默认的调度算法是: wlc.
-p –persistent [timeout] 持久稳固的服务。这个选项的意思是来自同一个客户的多次请求,将被同一台真实的服务器处理。timeout 的默认值为300 秒。
-M –netmask netmask persistent granularity mask
-r –real-server server-address 真实的服务器[Real-Server:port]
-g –gatewaying 指定LVS 的工作模式为直接路由模式(也是LVS 默认的模式)
-i –ipip 指定LVS 的工作模式为隧道模式
-m –masquerading 指定LVS 的工作模式为NAT 模式
-w –weight weight 真实服务器的权值
–mcast-interface interface 指定组播的同步接口
-c –connection 显示LVS 目前的连接 如:ipvsadm -L -c
–timeout 显示tcp tcpfin udp 的timeout 值 如:ipvsadm -L –timeout
–daemon 显示同步守护进程状态
–stats 显示统计信息
–rate 显示速率信息
–sort 对虚拟服务器和真实服务器排序输出
–numeric -n 输出IP 地址和端口的数字形式
0 0
- LVS基本命令详解
- LVS简单命令详解
- LVS系列—LVS安装使用详解(ipvsadm命令)
- LVS详解
- LVS详解
- ant基本命令详解
- svn基本命令详解
- uboot基本命令详解
- Vagrant基本命令详解
- RHEL7基本命令详解
- git基本命令详解
- Linux基本命令详解
- LVS基本介绍
- LVS基本介绍
- LVS基本配置
- Linux基本命令及其详解
- Linux 基本命令部分详解
- Linux系统基本命令详解
- MD5Util开发工具类
- 一些相关概念
- linux下的用户管理小结
- C++ Primer 学习笔记——IO类
- 解决:Android Studio 不能预览
- LVS基本命令详解
- Linux多线程实践(五 )Posix信号量和互斥锁解决生产者消费者问题
- 有序二维数组查找元素
- HDU 5507 Graph(dp + 矩阵快速幂)
- MacBook下疑难杂症诊断攻略
- 结构和类
- 判断颁奖人员(C语言实现)
- linux下git的基本命令与github的基本运用
- VM上配置linux服务器解决mac地址冲突,无法联网问题