httpsqs的安装测试

httpsqs的安装测试

http://192.168.56.101:1218/?name=test&opt=put&data=TEXT&auth=123456 ; w
http://192.168.56.101:1218/?charset=utf-8&name=test&opt=get&auth=123456 ; r



1  zlib安装：安装zlib和bzip2  注意 是有顺序的：zlib->bzip2
              安装开始；
               wget ziib官网下载地址，版本1.2.5
               tar -xvzf zlib-1.2.5.tar.gz  如果报错gzip等等 去掉z。
               cd zlib-1.2.5.
              ./configure  

               make前，修改Makefile
                CC=gcc -fPIC
                CFLAGS=-O3 -fPIC -D_LARGEFILE64_SOURCE=1
                #CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
                #CFLAGS=-g -DDEBUG
                #CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
                # -Wstrict-prototypes -Wmissing-prototypes
                记得make前或者configure前，先进行make clean，或者将之前指定的目录prefix参数中的内容全部rm掉，比较彻底和暴力
            make
            make install




      2    bzip2安装：
             http://www.bzip.org/1.0.6/bzip2-1.0.6.tar.gz安装开始；
             wget http://www.bzip.org/1.0.6/bzip2-1.0.6.tar.gz
             tar -xvzf bzip2-1.0.6.tar.gz
             cd bzip2-1.0.6

                修改Makefile，
                    # To assist in cross-compiling
                    CC=gcc -fPIC
                    AR=ar
                    RANLIB=ranlib
                    LDFLAGS=

                    BIGFILES=-D_FILE_OFFSET_BITS=64
                    CFLAGS=-Wall -Winline -O2 -fPIC -g $(BIGFILES)
             make 
             make install


 3.安装libevent-2.0.12-stable.tar.gz
wget http://httpsqs.googlecode.com/files/libevent-2.0.12-stable.tar.gz -》翻墙下载。下同
tar zxvf libevent-2.0.12-stable.tar.gz
cd libevent-2.0.12-stable/
./configure --prefix=/usr/local/libevent-2.0.12-stable/
make
make install
cd ../


4.安装tokyocabinet-1.4.47.tar.gz
wget http://httpsqs.googlecode.com/files/tokyocabinet-1.4.47.tar.gz
tar zxvf tokyocabinet-1.4.47.tar.gz
cd tokyocabinet-1.4.47/
./configure --prefix=/usr/local/tokyocabinet-1.4.47/
#注：在32位Linux操作系统上编译Tokyo cabinet，请使用./configure --enable-off64代替./configure，可

以使数据库文件突破2GB的限制。
#./configure --enable-off64 --prefix=/usr/local/tokyocabinet-1.4.47/
make
make install
cd ../
3.安装httpsqs-1.7.tar.gz
wget http://httpsqs.googlecode.com/files/httpsqs-1.7.tar.gz
tar zxvf httpsqs-1.7.tar.gz
cd httpsqs-1.7/
make
make install
cd ../  


5.测试

如果安装成功 执行httpsqs –h 会出现
------------------------------------------------------------------------------------------------

-- 
HTTP Simple Queue Service - httpsqs v1.7 (April 14, 2011)  
 ........................


6.设置

存储目录

#mkdir /usr/local/httpsqs_queue

mkdir /home/bf
vi /home/bf/httpsqs.sh
内容如下：
#! /bin/sh
ulimit -SHn 65535
启动方法
带密码
# /usr/bin/httpsqs -d -p 1218 -t 10 -c 10000 -m 512 -x /usr/local/httpsqs_queue -a pwd123
无密码
# /usr/bin/httpsqs -d -p 1218 -t 10 -c 10000 -m 512 -x /usr/local/httpsqs_queue
干掉的方法
# killall httpsqs  
注意需要打开防火墙端口
vim /etc/sysconfig/iptables
添加下面一行，打开防火墙1218端口:
-A INPUT -m state --state NEW -m tcp -p tcp --dport 1218 -j ACCEPT
重启防火墙
#/etc/init.d/iptables restart
 
7.使用

写队列
http://192.168.2.103:1218/?name=your_queue_name&opt=put&data=TEXT&auth=pwd123 


读队列
http://192.168.2.103:1218/?charset=utf-8&name=your_queue_name&opt=get&auth=pwd123


写队列无密码
http://192.168.2.103:1218/?name=your_queue_name&opt=put&data=TEXT


读队列无密码
http://192.168.2.103:1218/?charset=utf-8&name=your_queue_name&opt=get