kafka案例
来源:互联网 发布:泰达有线网络 编辑:程序博客网 时间:2024/05/21 11:00
Consumer Group Example
Using the High Level Consumer
Why use the High Level Consumer
Sometimes the logic to read messages from Kafka doesn't care about handling the message offsets, it just wants the data. So the High Level Consumer is provided to abstract most of the details of consuming events from Kafka.
First thing to know is that the High Level Consumer stores the last offset read from a specific partition in ZooKeeper. This offset is stored based on the name provided to Kafka when the process starts. This name is referred to as the Consumer Group.
The Consumer Group name is global across a Kafka cluster, so you should be careful that any 'old' logic Consumers be shutdown before starting new code. When a new process is started with the same Consumer Group name, Kafka will add that processes' threads to the set of threads available to consume the Topic and trigger a 're-balance'. During this re-balance Kafka will assign available partitions to available threads, possibly moving a partition to another process. If you have a mixture of old and new business logic, it is possible that some messages go to the old logic.
Designing a High Level Consumer
The first thing to know about using a High Level Consumer is that it can (and should!) be a multi-threaded application. The threading model revolves around the number of partitions in your topic and there are some very specific rules:
- if you provide more threads than there are partitions on the topic, some threads will never see a message
- if you have more partitions than you have threads, some threads will receive data from multiple partitions
- if you have multiple partitions per thread there is NO guarantee about the order you receive messages, other than that within the partition the offsets will be sequential. For example, you may receive 5 messages from partition 10 and 6 from partition 11, then 5 more from partition 10 followed by 5 more from partition 10 even if partition 11 has data available.
- adding more processes/threads will cause Kafka to re-balance, possibly changing the assignment of a Partition to a Thread.
Next, your logic should expect to get an iterator from Kafka that may block if there are no new messages available.
Here is an example of a very simple consumer that expects to be threaded.
The interesting part here is the while (it.hasNext()) section. Basically this code reads from Kafka until you stop it.
Configuring the test application
Unlike the SimpleConsumer the High level consumer takes care of a lot of the bookkeeping and error handling for you. However you do need to tell Kafka where to store some information. The following method defines the basics for creating a High Level Consumer:
The ‘zookeeper.connect’ string identifies where to find once instance of Zookeeper in your cluster. Kafka uses ZooKeeper to store offsets of messages consumed for a specific topic and partition by this Consumer Group
The ‘group.id’ string defines the Consumer Group this process is consuming on behalf of.
The ‘zookeeper.session.timeout.ms’ is how many milliseconds Kafka will wait for ZooKeeper to respond to a request (read or write) before giving up and continuing to consume messages.
The ‘zookeeper.sync.time.ms’ is the number of milliseconds a ZooKeeper ‘follower’ can be behind the master before an error occurs.
The ‘auto.commit.interval.ms’ setting is how often updates to the consumed offsets are written to ZooKeeper. Note that since the commit frequency is time based instead of # of messages consumed, if an error occurs between updates to ZooKeeper on restart you will get replayed messages.
More information about these settings can be found here
Creating the thread pool
This example uses the Java java.util.concurrent package for thread management since it makes creating a thread pool very simple.
First we create a Map that tells Kafka how many threads we are providing for which topics. The consumer.createMessageStreams is how we pass this information to Kafka. The return is a map of KafkaStream to listen on for each topic. (Note here we only asked Kafka for a single Topic but we could have asked for multiple by adding another element to the Map.)
Finally we create the thread pool and pass a new ConsumerTest object to each thread as our business logic.
Clean Shutdown and Error Handling
Kafka does not update Zookeeper with the message offset last read after every read, instead it waits a short period of time. Due to this delay it is possible that your logic has consumed a message and that fact hasn't been synced to zookeeper. So if your client exits/crashes you may find messages being replayed next time to start.
Also note that sometimes the loss of a Broker or other event that causes the Leader for a Partition to change can also cause duplicate messages to be replayed.
To help avoid this, make sure you provide a clean way for your client to exit instead of assuming it can be 'kill -9'd.
As an example, the main here sleeps for 10 seconds, which allows the background consumer threads to consume data from their streams 10 seconds. Since auto commit is on, they will commit offsets every second. Then, shutdown is called, which calls shutdown on the consumer, then on the ExecutorService, and finally tries to wait for the ExecutorService to finish all outsanding work. This gives the consumer threads time to finish processing the few outstanding messages that may remain in their streams. Shutting down the consumer causes the iterators for each stream to return false for hasNext() once all messages already received from the server are processed, so the other threads should exit gracefully. Additionally, with auto commit enabled, the call to consumer.shutdown() will commit the final offsets.
In practice, a more common pattern is to use sleep indefinitely and use a shutdown hook to trigger clean shutdown.
Running the example
The example code expects the following command line parameters:
- ZooKeeper connection string with port number
- Consumer Group name to use for this process
- Topic to consume messages from
- # of threads to launch to consume the messages
For example:
Will connect to port 2181 on server01.myco.com for ZooKeeper and requests all partitions from Topic myTopic and consume them via 4 threads. The Consumer Group for this example is group3.
Full Source Code
- kafka案例
- spark整合kafka案例
- Kafka的producer案例,Kafka的consumer案例
- kafka HighLevelConsumer API 使用案例
- kafka实战案例分析总结
- storm kafka插件使用案例
- jstorm kafka插件使用案例
- Spark之SparkStreaming案例-kafka
- storm和kafka整合案例
- kafka快速入门,生产者与消费者案例
- Flume与Kafka整合案例详解
- Spark+Kafka构建实时分析Dashboard案例
- Flume与Kafka整合案例详解
- Flume与Kafka整合案例详解
- SpringBoot整合Kafka:简单收发消息案例
- _00017 Kafka的体系结构介绍以及Kafka入门案例(初级案例+Java API的使用)
- _00017 Kafka的体系结构介绍以及Kafka入门案例(初级案例+Java API的使用)
- Strom+Kafka + redis实时计算单词出现频率的案例
- FLV文件格式解析
- hdoj 1789 Doing Homework again
- perl 登陆后返回的信息
- hdu 3586 Information Disturbing 删边类树形DP
- code vs 1966 乘法游戏
- kafka案例
- 调用导出dll中的类成员函数 - error LNK2019: 无法解析的外部符号
- 编程常见错误
- 黑马程序员——Java内存结构
- Android开发listview的一点体会
- Mac上安装mysql
- python大型项目 个人学习中心
- 屏蔽上网时弹窗广告,防止追踪、恶意域名,过滤横幅广告、以及视频广告的方法
- GeekBand第三周 3.1 自定义控件