iOS 谓词
来源:互联网 发布:卡特背扣绝杀猛龙数据 编辑:程序博客网 时间:2024/06/06 08:30
大家在平常的开发过程中多多少少都会接触到数据筛选,那势必会用到NSPredicate
,这个类和我上一篇博文中提到的valueForKeyPath一样很强大。它的使用主要集中在两个方法中
NSArray
- (NSArray *)filteredArrayUsingPredicate:(NSPredicate *)predicate;
NSMutableArray
- (void)filterUsingPredicate:(NSPredicate *)predicate;
还有NSSet
和NSMutableSet
也可以用这个类筛选。
下面我就来一一介绍这个类的用法,相信大家看完后会和我一样认为这个类真的很强大。
筛选用法
- 利用成员实例方法
筛选出长度大于3的字符串
NSArray *array = @[@"jim", @"cook", @"jobs", @"sdevm"]; NSPredicate *pre = [NSPredicate predicateWithFormat:@"length > 3"]; NSLog(@"%@", [array filteredArrayUsingPredicate:pre]);
打印
( cook, jobs, sdevm)
lenght
就是对数组成员执行[xxxx lenght]然后判断返回的NSUInteger值是否大于3。扩展到NSString其他方法比如integerValue
NSArray *array = @[@"2", @"3", @"4", @"5"];NSPredicate *pre = [NSPredicate predicateWithFormat:@"integerValue >= %@", @3];NSLog(@"%@", [array filteredArrayUsingPredicate:pre]);
如果我不想用任何实例方法,想筛选成员本身应该怎么做呢。这时候就可以用self
来代替
NSPredicate *pre = [NSPredicate predicateWithFormat:@"self CONTAINS %@", @3];
CONTAINS
用法后面会讲到
再扩展到模型
Test.h
@interface Test : NSObject@property (nonatomic, strong) NSString *name;@property (nonatomic, strong) NSNumber *code;@end
Test *test1 = [[Test alloc]init]; test1.name = @"西湖"; test1.code = @1; Test *test2 = [[Test alloc]init]; test2.name = @"西溪湿地"; test2.code = @2; Test *test3 = [[Test alloc]init]; test3.name = @"灵隐寺"; test3.code = @3; NSArray *array = @[test1, test2, test3]; NSPredicate *pre = [NSPredicate predicateWithFormat:@"code >= %@", @2]; NSLog(@"%@", [array filteredArrayUsingPredicate:pre]);
筛选出数组成员[test code]
方法(code属性的get方法)返回值>=2的成员。这里的比较运算符同样也可以使用==
、!=
、<=
、<
。
其实==
不仅可以用来比较NSNumber对象,还可以用来判断NSString对象是否相同。
NSPredicate *pre = [NSPredicate predicateWithFormat:@"name == %@", @"西湖"];
筛选出name
是"西湖"的对象数组。
- ###NSString对象的操作
前面提到==
比较运算符可以起到- (BOOL)isEqualToString:(NSString *)aString;
方法的效果,来判断字符串是否相同。那么字符串中包含某个字符串应该如何判断呢,在NSPredicate中可以用CONTAINS
(大小写都可以)来表示包含关系。
NSPredicate *pre = [NSPredicate predicateWithFormat:@"name CONTAINS %@", @"湖"];
当判断的时候需要忽略大小写可以使用[cd]
[c] 忽略大小写
[d] 忽略重音符号
[cd]既不区分大小写,也不区分发音符号。
使用:
NSPredicate *pre = [NSPredicate predicateWithFormat:@"name CONTAINS[cd] %@", @"abc"];
再涉及到一些更复杂的查询语句,比如判断字符串以某个字符串开头或者结尾,通配符的使用。
BEGINSWITH(已某个字符串开头, begins with)
NSString *targetString = @"h"; NSPredicate *pre = [NSPredicate predicateWithFormat:@"name BEGINSWITH %@",targetString];
ENDSWITH(已某个字符串结尾, ends with)
NSString *targetString = @"ing"; NSPredicate *pre = [NSPredicate predicateWithFormat:@"name ENDSWITH %@",targetString];
通配符 LIKE
*代表一个或者多个或者是空
?代表一个字符
Test *test1 = [[Test alloc]init];test1.name = @"absr";test1.code = @1;Test *test2 = [[Test alloc]init];test2.name = @"asb";test2.code = @2;Test *test3 = [[Test alloc]init];test3.name = @"raskj";test3.code = @3;NSArray *array = @[test1, test2, test3];NSPredicate *pre = [NSPredicate predicateWithFormat:@"name LIKE %@", @"?b*"];NSLog(@"%@", [array filteredArrayUsingPredicate:pre]);
结果是只有test1符合,like
也可以接受[cd]
NSPredicate *pre = [NSPredicate predicateWithFormat:@"name LIKE[cd] %@", @"?b*"];
关系运算,包括了IN
、BETWEEN
、AND
、OR
、NOT
IN(之中)
NSPredicate *pre = [NSPredicate predicateWithFormat:@"code IN %@", @[@1, @3]];
判断code是否@1或者是@2,也就是是否在数组中。
OR(或,可以用||代替)
OR
可以用来代替IN
达到同样的效果,但是OR
更灵活。
NSPredicate *pre = [NSPredicate predicateWithFormat:@"code == %@ OR code == %@ ", @1, @3];
效果和IN
一样,但是OR
可以判断不只一个属性
NSPredicate *pred = [NSPredicate predicateWithFormat:@"code == %@ OR name == %@ ", @1, @"asb"];
BETWEEN(之间)
通常用于判断NSNumber对象
NSPredicate *pred = [NSPredicate predicateWithFormat:@"code BETWEEN {1, 3}"];
判断code是否>=1且<=3
AND(且,可以用&&代替)
NSPredicate *pred = [NSPredicate predicateWithFormat:@"code >= %@ AND code <=%@", @1, @3];
NOT(非,可以用!代替)
NOT
最常见的用法就是从一个数组中剔除另外一个数组的数据,可能有点绕,举个例子就很明朗了。
NSArray *arrayFilter = @[@"abc1", @"abc2"]; NSArray *arrayContent = @[@"a1", @"abc1", @"abc4", @"abc2"]; NSPredicate *thePredicate = [NSPredicate predicateWithFormat:@"NOT (SELF in %@)", arrayFilter]; NSLog(@"%@",[arrayContent filteredArrayUsingPredicate:thePredicate]);
打印
( a1, abc4)
比起循环比较再加到新数组中,简单的不止一两点。
前面提到的都是用+ (NSPredicate *)predicateWithFormat:(NSString *)predicateFormat, ...;
方法创建,还有另一种常用的方法:+ (NSPredicate*)predicateWithBlock:(BOOL (^)(id evaluatedObject, NSDictionary *bindings))block
,用Block形式创建
NSPredicate *pre = [NSPredicate predicateWithBlock:^BOOL(id evaluatedObject, NSDictionary *bindings) { Test *test = (Test *)evaluatedObject; if (test.code.integerValue > 2) { return YES; } else{ return NO; }}];
参数evaluatedObject
表示数组成员,block必须返回YES或者NO,分别表示匹配还是不匹配。请忽略bindings
参数,具体作用我也没搞清楚。
多重筛选
如果需要匹配数个属性的筛选,用AND
或者OR
来串联显然有点麻烦,NSCompoundPredicate
类可以满足我们的需求,它可以将多个NSPredicate
对象的组合,组合方式可以是AND
或者OR
。
NSPredicate *pre1 = [NSPredicate predicateWithFormat:@"code >= %@", @3]; NSPredicate *pre2 = [NSPredicate predicateWithFormat:@"code <= %@", @2]; //以AND形式组合 NSPredicate *pre = [NSCompoundPredicate andPredicateWithSubpredicates:@[pre1,pre2]]; //以OR形式组合 NSPredicate *pre = [NSCompoundPredicate orPredicateWithSubpredicates:@[pre1, pre2]];
匹配用法
其实NSPredicate不仅可以用于筛选,还可以用来判断匹配直接返回是否符合,主要方法是- (BOOL)evaluateWithObject:(id)object;
,用法:
Test *test1 = [[Test alloc]init]; test1.name = @"absr"; test1.code = @1; NSPredicate *pres = [NSPredicate predicateWithFormat:@"code == %@", @2]; BOOL match = [pres evaluateWithObject:test1];
当然最常用的还是配合配合正则表达式,列举几个常用的正则
是否以a开头以e结尾
NSString *string=@"assdbfe"; NSString *targetString=@"^a.+e$"; NSPredicate *pres = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", targetString]; BOOL match = [pres evaluateWithObject:string];
是否是邮箱
NSString *strRegex = @"[A-Z0-9a-z._%+-]+@[A-Za-z0-9.-]+\\.[A-Za-z]{1,5}";
是否是手机号
NSString *strRegex = @"[0-9]{1,20}";
坑
不得不说,在利用+ (NSPredicate *)predicateWithFormat:(NSString *)predicateFormat, ...;
方法创建的NSPredicate对象的时候有个坑。
在某些情况下,类似于上面例子中的code
字符串不是很明确,创建的时候就会这样使用
Test *test1 = [[Test alloc]init];test1.name = @"absr";test1.code = @1;Test *test2 = [[Test alloc]init];test2.name = @"asb";test2.code = @2;Test *test3 = [[Test alloc]init];test3.name = @"raskj";test3.code = @3;NSArray *array = @[test1, test2, test3];NSPredicate *pre = [NSPredicate predicateWithFormat:@"%@ == %@", @"code", @2];NSLog(@"%@", [array filteredArrayUsingPredicate:pre]);
注意NSPredicate对象的初始化方式。运行这块代码你会发现test2对象没有被查询出来。打印pre
发现"code" == 2
,这说明查找的是"code"
方法的返回值,这显然行不通。
如果查询的是属性,比如code是Test类的属性,那么利用下面的创建方式
NSPredicate *pre = [NSPredicate predicateWithFormat:@"%K == %@", @"code", @2];
就不会被坑
注意:%K
的K
必须是大写。
最后
NSPredicate几乎可以满足所有形式的查询,配合Core Data的数据库查询当然不在话下。NSPredicate用法不只这些,有兴趣的同学可以看下nshipster网站的这篇博文,里面提到了一些我没有涉及到的用法。
- iOS 谓词
- iOS 谓词
- ios 谓词
- iOS:谓词基础,使用谓词搜索
- IOS谓词--NSPredicate
- iOS 谓词查询NSPredicate
- ios 谓词使用
- ios 谓词的使用
- IOS NSPredicate 谓词
- ios 谓词使用方法
- IOS谓词--NSPredicate
- iOS NSPredicate谓词
- IOS谓词--NSPredicate
- IOS谓词--NSPredicate
- iOS谓词使用--NSPredicate
- iOS 谓词 NSPredicate 详解
- iOS NSPredicate(谓词)
- iOS之谓词详解
- Spring AOP进行日志记录,管理
- python 模块概述
- liunx之echo和unset的用法(centos7)
- 2016年1月10-----------开发WebView+ListView+ScrollView+emoj表情库 有感
- linux多线程学习(三)——线程属性设置
- iOS 谓词
- 关于WebView的第N次开发----血泪史(屎)
- 几种排序算法
- iOS Crash解析
- hive 开发疑问
- 有关夜间模式
- Realm-在iOS中应用-全新的数据库思维模式
- jdk环境变量的配置及path、classpath的作用和区别
- 2015 12 3 Handler