加密解密存储过程
来源:互联网 发布:sql round 编辑:程序博客网 时间:2024/05/16 18:24
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[sp_decrypt]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)
drop procedure [dbo].[sp_decrypt]
GO
/*--破解函数,过程,触发器,视图.仅限于SQLSERVER2000
--作者:J9988-- All rights reserved*/
/*--调用示例
--解密指定存储过程
exec sp_decrypt 'AppSP_test'
--对所有的存储过程解密
declare tb cursor for
select name from sysobjects where xtype='P' and status>0 and name'sp_decrypt'
declare @name sysname
open tb
fetch next from tb into @name
while @@fetch_status=0
begin
print '/*-------存储过程 ['+@name+'] -----------*/'
exec sp_decrypt @name
fetch next from tb into @name
end
close tb
deallocate tb
--*/
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[SP_DECRYPT]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)
drop procedure [dbo].[SP_DECRYPT]
GO
CREATE PROCEDURE sp_decrypt(@objectName varchar(50))
AS
begin
set nocount on
--破解字节不受限制,适用于SQLSERVER2000存储过程,函数,视图,触发器
--修正上一版视图触发器不能正确解密错误
--发现有错,请E_MAIL:CSDNj9988@tom.com
begin tran
declare @objectname1 varchar(100),@orgvarbin varbinary(8000)
declare @sql1 nvarchar(4000),@sql2 varchar(8000),@sql3 nvarchar(4000),@sql4 nvarchar(4000)
DECLARE @OrigSpText1 nvarchar(4000), @OrigSpText2 nvarchar(4000) , @OrigSpText3 nvarchar(4000), @resultsp nvarchar(4000)
declare @i int,@status int,@type varchar(10),@parentid int
declare @colid int,@n int,@q int,@j int,@k int,@encrypted int,@number int
select @type=xtype,@parentid=parent_obj from sysobjects where id=object_id(@ObjectName)
create table #temp(number int,colid int,ctext varbinary(8000),encrypted int,status int)
insert #temp SELECT number,colid,ctext,encrypted,status FROM syscomments WHERE id = object_id(@objectName)
select @number=max(number) from #temp
set @k=0
while @k1 then 'ALTER PROCEDURE '+ @objectName +';'+rtrim(@k)+' WITH ENCRYPTION AS '
else 'ALTER PROCEDURE '+ @objectName+' WITH ENCRYPTION AS '
end)
if @type='TR'
begin
declare @parent_obj varchar(255),@tr_parent_xtype varchar(10)
select @parent_obj=parent_obj from sysobjects where id=object_id(@objectName)
select @tr_parent_xtype=xtype from sysobjects where id=@parent_obj
if @tr_parent_xtype='V'
begin
set @sql1='ALTER TRIGGER '+@objectname+' ON '+OBJECT_NAME(@parentid)+' WITH ENCRYPTION INSTERD OF INSERT AS PRINT 1 '
end
else
begin
set @sql1='ALTER TRIGGER '+@objectname+' ON '+OBJECT_NAME(@parentid)+' WITH ENCRYPTION FOR INSERT AS PRINT 1 '
end
end
if @type='FN' or @type='TF' or @type='IF'
set @sql1=(case @type when 'TF' then
'ALTER FUNCTION '+ @objectName+'(@a char(1)) returns @b table(a varchar(10)) with encryption as begin insert @b select @a return end '
when 'FN' then
'ALTER FUNCTION '+ @objectName+'(@a char(1)) returns char(1) with encryption as begin return @a end'
when 'IF' then
'ALTER FUNCTION '+ @objectName+'(@a char(1)) returns table with encryption as return select @a as a'
end)
if @type='V'
set @sql1='ALTER VIEW '+@objectname+' WITH ENCRYPTION AS SELECT 1 as f'
set @q=len(@sql1)
set @sql1=@sql1+REPLICATE('-',4000-@q)
select @sql2=REPLICATE('-',8000)
set @sql3='exec(@sql1'
select @colid=max(colid) from #temp where number=@k
set @n=1
while @n1 then 'CREATE PROCEDURE '+ @objectName +';'+rtrim(@k)+' WITH ENCRYPTION AS '
else 'CREATE PROCEDURE '+ @objectName +' WITH ENCRYPTION AS '
end)
if @type='FN' or @type='TF' or @type='IF'
SET @OrigSpText2=(case @type when 'TF' then
'CREATE FUNCTION '+ @objectName+'(@a char(1)) returns @b table(a varchar(10)) with encryption as begin insert @b select @a return end '
when 'FN' then
'CREATE FUNCTION '+ @objectName+'(@a char(1)) returns char(1) with encryption as begin return @a end'
when 'IF' then
'CREATE FUNCTION '+ @objectName+'(@a char(1)) returns table with encryption as return select @a as a'
end)
if @type='TR'
begin
if @tr_parent_xtype='V'
begin
set @OrigSpText2='CREATE TRIGGER '+@objectname+' ON '+OBJECT_NAME(@parentid)+' WITH ENCRYPTION INSTEAD OF INSERT AS PRINT 1 '
end
else
begin
set @OrigSpText2='CREATE TRIGGER '+@objectname+' ON '+OBJECT_NAME(@parentid)+' WITH ENCRYPTION FOR INSERT AS PRINT 1 '
end
end
if @type='V'
set @OrigSpText2='CREATE VIEW '+@objectname+' WITH ENCRYPTION AS SELECT 1 as f'
set @q=4000-len(@OrigSpText2)
set @OrigSpText2=@OrigSpText2+REPLICATE('-',@q)
end
else
begin
SET @OrigSpText2=REPLICATE('-', 4000)
end
SET @i=1
SET @resultsp = replicate(N'A', (datalength(@OrigSpText1) / 2))
WHILE @i<=datalength(@OrigSpText1)/2
BEGIN
SET @resultsp = stuff(@resultsp, @i, 1, NCHAR(UNICODE(substring(@OrigSpText1, @i, 1)) ^
(UNICODE(substring(@OrigSpText2, @i, 1)) ^
UNICODE(substring(@OrigSpText3, @i, 1)))))
SET @i=@i+1
END
set @orgvarbin=cast(@OrigSpText1 as varbinary(8000))
set @resultsp=(case when @encrypted=1
then @resultsp
else convert(nvarchar(4000),case when @status&2=2 then uncompress(@orgvarbin) else @orgvarbin end)
end)
print @resultsp
set @n=@n+1
end
end
set @k=@k+1
end
drop table #temp
rollback tran
end
drop procedure [dbo].[sp_decrypt]
GO
/*--破解函数,过程,触发器,视图.仅限于SQLSERVER2000
--作者:J9988-- All rights reserved*/
/*--调用示例
--解密指定存储过程
exec sp_decrypt 'AppSP_test'
--对所有的存储过程解密
declare tb cursor for
select name from sysobjects where xtype='P' and status>0 and name'sp_decrypt'
declare @name sysname
open tb
fetch next from tb into @name
while @@fetch_status=0
begin
print '/*-------存储过程 ['+@name+'] -----------*/'
exec sp_decrypt @name
fetch next from tb into @name
end
close tb
deallocate tb
--*/
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[SP_DECRYPT]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)
drop procedure [dbo].[SP_DECRYPT]
GO
CREATE PROCEDURE sp_decrypt(@objectName varchar(50))
AS
begin
set nocount on
--破解字节不受限制,适用于SQLSERVER2000存储过程,函数,视图,触发器
--修正上一版视图触发器不能正确解密错误
--发现有错,请E_MAIL:CSDNj9988@tom.com
begin tran
declare @objectname1 varchar(100),@orgvarbin varbinary(8000)
declare @sql1 nvarchar(4000),@sql2 varchar(8000),@sql3 nvarchar(4000),@sql4 nvarchar(4000)
DECLARE @OrigSpText1 nvarchar(4000), @OrigSpText2 nvarchar(4000) , @OrigSpText3 nvarchar(4000), @resultsp nvarchar(4000)
declare @i int,@status int,@type varchar(10),@parentid int
declare @colid int,@n int,@q int,@j int,@k int,@encrypted int,@number int
select @type=xtype,@parentid=parent_obj from sysobjects where id=object_id(@ObjectName)
create table #temp(number int,colid int,ctext varbinary(8000),encrypted int,status int)
insert #temp SELECT number,colid,ctext,encrypted,status FROM syscomments WHERE id = object_id(@objectName)
select @number=max(number) from #temp
set @k=0
while @k1 then 'ALTER PROCEDURE '+ @objectName +';'+rtrim(@k)+' WITH ENCRYPTION AS '
else 'ALTER PROCEDURE '+ @objectName+' WITH ENCRYPTION AS '
end)
if @type='TR'
begin
declare @parent_obj varchar(255),@tr_parent_xtype varchar(10)
select @parent_obj=parent_obj from sysobjects where id=object_id(@objectName)
select @tr_parent_xtype=xtype from sysobjects where id=@parent_obj
if @tr_parent_xtype='V'
begin
set @sql1='ALTER TRIGGER '+@objectname+' ON '+OBJECT_NAME(@parentid)+' WITH ENCRYPTION INSTERD OF INSERT AS PRINT 1 '
end
else
begin
set @sql1='ALTER TRIGGER '+@objectname+' ON '+OBJECT_NAME(@parentid)+' WITH ENCRYPTION FOR INSERT AS PRINT 1 '
end
end
if @type='FN' or @type='TF' or @type='IF'
set @sql1=(case @type when 'TF' then
'ALTER FUNCTION '+ @objectName+'(@a char(1)) returns @b table(a varchar(10)) with encryption as begin insert @b select @a return end '
when 'FN' then
'ALTER FUNCTION '+ @objectName+'(@a char(1)) returns char(1) with encryption as begin return @a end'
when 'IF' then
'ALTER FUNCTION '+ @objectName+'(@a char(1)) returns table with encryption as return select @a as a'
end)
if @type='V'
set @sql1='ALTER VIEW '+@objectname+' WITH ENCRYPTION AS SELECT 1 as f'
set @q=len(@sql1)
set @sql1=@sql1+REPLICATE('-',4000-@q)
select @sql2=REPLICATE('-',8000)
set @sql3='exec(@sql1'
select @colid=max(colid) from #temp where number=@k
set @n=1
while @n1 then 'CREATE PROCEDURE '+ @objectName +';'+rtrim(@k)+' WITH ENCRYPTION AS '
else 'CREATE PROCEDURE '+ @objectName +' WITH ENCRYPTION AS '
end)
if @type='FN' or @type='TF' or @type='IF'
SET @OrigSpText2=(case @type when 'TF' then
'CREATE FUNCTION '+ @objectName+'(@a char(1)) returns @b table(a varchar(10)) with encryption as begin insert @b select @a return end '
when 'FN' then
'CREATE FUNCTION '+ @objectName+'(@a char(1)) returns char(1) with encryption as begin return @a end'
when 'IF' then
'CREATE FUNCTION '+ @objectName+'(@a char(1)) returns table with encryption as return select @a as a'
end)
if @type='TR'
begin
if @tr_parent_xtype='V'
begin
set @OrigSpText2='CREATE TRIGGER '+@objectname+' ON '+OBJECT_NAME(@parentid)+' WITH ENCRYPTION INSTEAD OF INSERT AS PRINT 1 '
end
else
begin
set @OrigSpText2='CREATE TRIGGER '+@objectname+' ON '+OBJECT_NAME(@parentid)+' WITH ENCRYPTION FOR INSERT AS PRINT 1 '
end
end
if @type='V'
set @OrigSpText2='CREATE VIEW '+@objectname+' WITH ENCRYPTION AS SELECT 1 as f'
set @q=4000-len(@OrigSpText2)
set @OrigSpText2=@OrigSpText2+REPLICATE('-',@q)
end
else
begin
SET @OrigSpText2=REPLICATE('-', 4000)
end
SET @i=1
SET @resultsp = replicate(N'A', (datalength(@OrigSpText1) / 2))
WHILE @i<=datalength(@OrigSpText1)/2
BEGIN
SET @resultsp = stuff(@resultsp, @i, 1, NCHAR(UNICODE(substring(@OrigSpText1, @i, 1)) ^
(UNICODE(substring(@OrigSpText2, @i, 1)) ^
UNICODE(substring(@OrigSpText3, @i, 1)))))
SET @i=@i+1
END
set @orgvarbin=cast(@OrigSpText1 as varbinary(8000))
set @resultsp=(case when @encrypted=1
then @resultsp
else convert(nvarchar(4000),case when @status&2=2 then uncompress(@orgvarbin) else @orgvarbin end)
end)
print @resultsp
set @n=@n+1
end
end
set @k=@k+1
end
drop table #temp
rollback tran
end
- 加密解密存储过程
- 存储过程加密解密
- 加密解密存储过程代码
- 加密的存储过程解密
- MSSQL 存储过程加密解密
- Sql存储过程加密 Sql存储过程加密和解密
- oracle存储过程加密如何解密?
- SQL 2000 存储过程如何加密,解密
- Sql存储过程加密和解密
- 加密与解密SQLSERVER存储过程
- SQL Server存储过程加密和解密
- 【转】存储过程加密及解密
- SQL SERVER 存储过程加密和解密
- SQL SERVER 存储过程加密和解密
- 解密 被加密的存储过程
- SQL Server存储过程加密与解密
- MsSql数据库存储过程加密解密
- SQL Server存储过程加密和解密
- 第二回.初窥CF类型加载器
- 发布一个记账软件---流水记账
- 我理解的IoC和AOP
- 最近的迷茫。
- 24款实用的翻页页码css代码
- 加密解密存储过程
- 支持闰月的js农历日历代码
- vs.net2005新建网站和新建WEB应用程序的区别
- 经典加密算法在VB中的实现(1)- Base64
- Unicode类型的CString转化为char*
- 分布式源代码管理系统GIT
- zt 军事历史纵横谈:美国空军3块钢板的反思
- 经典加密算法在VB中的实现(2)- MD5
- java 文件下载