Ubuntu下编译linux内核,报"mkimage" command not found错的解决
来源:互联网 发布:药店时空软件官网 编辑:程序博客网 时间:2024/05/18 03:59
装好了Ubuntu,买好了开发板,开始逐个测试接口,发现这块板子的CAN是SPI转的,根据开发板手册要求,还需要自己编译Linux内核去启用。
好吧,反正都没玩过,一个个来呗,跟着手册step by step的配置好了编译内核的环境,然后开始调整菜单,最后执行:
#make uImage
好吧,开始漫长的等待,信息刷屏
许久之后,居然提示我:
"mkimage" command not found - U-Boot images will not be built
make[1]: *** [arch/arm/boot/uImage] 错误 1
make: *** [uImage] 错误 2
什么情况!怎么还会缺少mkimage的?
好吧,度娘之。
简单说,解决方法就是:
#sudo apt-get install uboot-mkimage
嗯,对了,装的过程看了下信息,发现最终安装的是
u-boot-tools
所以估计,直接执行
#sudo apt-get install u-boot-tools
可能更直接一点?
0 0
- Ubuntu下编译linux内核,报"mkimage" command not found错的解决
- 解决Ubuntu编译内核uImage出现问题“mkimage” command not found - U-Boot
- linux(ubuntu)编译linux内核提示"mkimage" command not found
- 编译linux内核出现mkimage command not found错误
- 编译内核错误:"mkimage" command not found
- 编译内核报错:"mkimage" command not found - U-Boot ima...
- 解决ubuntu编译内核uImage出现问题"mkimage" command not found - U-Boot images will not be built问题
- 解决Ubuntu编译内核uImage出现问题“mkimage” command not found - U-Boot images will not be built问题
- 解决Ubuntu编译内核uImage出现问题“mkimage” command not found - U-Boot images will not be built问题
- Ubuntu 编译内核-"mkimage" command not found - U-Boot images will not be built
- 编译linux内核时出现"mkimage" command not found - U-Boot images will not be built错误的解决办法
- 解决mkimage" command not found
- ubuntu 14.04 编译内核提示mkimage command not found – U-Boot images
- 编译内核make uImage出错“mkimage" command not found…”
- Linux学习日志(10)- 编译内核make uImage出错“mkimage" command not found…”
- 解决内核编译时产生 "mkimage" command not found - U-Boot images will not be built 错误
- linux下 的command not found解决
- ubuntu mkimage command not found 解决方案!!!
- Java_SE01-API和字符串操作
- gf
- gfc
- matplotlib 画图
- leetcode_073 Set Matrix Zeros
- Ubuntu下编译linux内核,报"mkimage" command not found错的解决
- 大数相加
- 总结
- 新的开始
- linux设置网络传输包mtu
- 逆向工程实战分享
- [bzoj4454]C Language Practice 解题报告
- EditText光标位置的改变
- Leetcode 117. Populating Next Right Pointers in Each Node II