PostgreSQL C代码覆盖率测试(gcov, lcov)

来源：互联网发布：石墨烯降温贴淘宝编辑：程序博客网时间：2024/05/01 00:13

通常我们评判一个test case好坏的标准之一是代码的覆盖率，一个好的test case应该覆盖到所有的代码。

那么问题来了，我们怎么知道这个test case有没有覆盖到所有的代码呢？

以C代码为例，我们看看如何检测代码覆盖率。

C代码覆盖率测试，需要用到gcc的配套工具gcov ，还有一个可视化公建lcov。

接下来以PostgreSQL为例，看看如何查看代码覆盖率。

首先需要打开PostgreSQL的一个编译选项。

--enable-coverage build with coverage testing instrumentation

这个编译项对应gcc的两个参数 -fprofile-arcs -ftest-coverage

# enable code coverage if --enable-coverage

if test "$enable_coverage" = yes; then

if test "$GCC" = yes; then

CFLAGS="$CFLAGS -fprofile-arcs -ftest-coverage"

else

as_fn_error $? "--enable-coverage is supported only when using GCC" "$LINENO" 5

这两个参数的含义如下：

man gcc

-fprofile-arcs 用于产生.c文件对应的.gcda文件，.gcda文件可以被用于profile驱动的优化，或者结合gcov 来做代码覆盖分析。

编译时尽量不要使用-O优化，这样代码覆盖数据.gcda才能尽可能和代码接近。

当代码被调用时，.gcda文件中对应的计数器会被修改，记录代码被调用的次数。

Add code so that program flow arcs are instrumented. During execution the program records how many times each branch and call is executed and how many times it is taken or returns. When the compiled

program exits it saves this data to a file called auxname.gcda for each source file. The data may be used for profile-directed optimizations (-fbranch-probabilities), or for test coverage analysis

(-ftest-coverage). Each object file’s auxname is generated from the name of the output file, if explicitly specified and it is not the final executable, otherwise it is the basename of the source file.

In both cases any suffix is removed (e.g. foo.gcda for input file dir/foo.c, or dir/foo.gcda for output file specified as -o dir/foo.o).

--coverage

This option is used to compile and link code instrumented for coverage analysis. The option is a synonym for -fprofile-arcs -ftest-coverage (when compiling) and -lgcov (when linking). See the

documentation for those options for more details.

· Compile the source files with -fprofile-arcs plus optimization and code generation options. For test coverage analysis, use the additional -ftest-coverage option. You do not need to profile every

source file in a program.

· Link your object files with -lgcov or -fprofile-arcs (the latter implies the former).

· Run the program on a representative workload to generate the arc profile information. This may be repeated any number of times. You can run concurrent instances of your program, and provided that

the file system supports locking, the data files will be correctly updated. Also "fork" calls are detected and correctly handled (double counting will not happen).

· For profile-directed optimizations, compile the source files again with the same optimization and code generation options plus -fbranch-probabilities.

· For test coverage analysis, use gcov to produce human readable information from the .gcno and .gcda files. Refer to the gcov documentation for further information.

With -fprofile-arcs, for each function of your program GCC creates a program flow graph, then finds a spanning tree for the graph. Only arcs that are not on the spanning tree have to be instrumented:

the compiler adds code to count the number of times that these arcs are executed. When an arc is the only exit or only entrance to a block, the instrumentation code can be added to the block;

otherwise, a new basic block must be created to hold the instrumentation code.

-ftest-coverage 这个选项用于产生.c文件的.gcno文件。这个文件生成后不会被修改。结合.gcda，可以分析测试代码覆盖率。

Produce a notes file that the gcov code-coverage utility can use to show program coverage. Each source file’s note file is called auxname.gcno. Refer to the -fprofile-arcs option above for a

description of auxname and instructions on how to generate test coverage data. Coverage data will match the source files more closely, if you do not optimize.

首先需要安装依赖gcov和lcov

gcov在gcc包中已经包含了，locv是ltp的一个gcov扩展插件，用来产生HTML报告.

lcov用法参考：

http://ltp.sourceforge.net/coverage/lcov.php

http://ltp.sourceforge.net/coverage/lcov/readme.php

# yum install -y http://downloads.sourceforge.net/ltp/lcov-1.11-1.noarch.rpm

编译PostgreSQL

./configure --prefix=/opt/pgsql9.4.4 --with-pgport=1921 --with-perl --with-python --with-tcl --with-openssl --with-pam --with-ldap --with-libxml --with-libxslt --enable-thread-safety --enable-debug --enable-dtrace --enable-coverage

gmake world && gmake install-world

安装好后，我们会发现在源码目录中多了一些.gcda和.gcno的文件，每个.c文件都会对应这两个文件。

postgres@digoal-> ll

total 1.3M

-rw-r--r-- 1 postgres postgres 22K Jun 10 03:29 gistbuildbuffers.c

-rw------- 1 postgres postgres 1.6K Sep 7 14:42 gistbuildbuffers.gcda

-rw-r--r-- 1 postgres postgres 15K Sep 7 14:38 gistbuildbuffers.gcno

-rw-r--r-- 1 postgres postgres 70K Sep 7 14:38 gistbuildbuffers.o

-rw-r--r-- 1 postgres postgres 37K Jun 10 03:29 gistbuild.c

-rw------- 1 postgres postgres 2.2K Sep 7 14:42 gistbuild.gcda

-rw-r--r-- 1 postgres postgres 20K Sep 7 14:38 gistbuild.gcno

-rw-r--r-- 1 postgres postgres 92K Sep 7 14:38 gistbuild.o

-rw-r--r-- 1 postgres postgres 43K Jun 10 03:29 gist.c

-rw------- 1 postgres postgres 3.1K Sep 7 14:42 gist.gcda

-rw-r--r-- 1 postgres postgres 29K Sep 7 14:38 gist.gcno

-rw-r--r-- 1 postgres postgres 16K Jun 10 03:29 gistget.c

-rw------- 1 postgres postgres 1.3K Sep 7 14:42 gistget.gcda

-rw-r--r-- 1 postgres postgres 13K Sep 7 14:38 gistget.gcno

-rw-r--r-- 1 postgres postgres 74K Sep 7 14:38 gistget.o

-rw-r--r-- 1 postgres postgres 101K Sep 7 14:38 gist.o

-rw-r--r-- 1 postgres postgres 39K Jun 10 03:29 gistproc.c

-rw------- 1 postgres postgres 3.1K Sep 7 14:42 gistproc.gcda

-rw-r--r-- 1 postgres postgres 31K Sep 7 14:38 gistproc.gcno

-rw-r--r-- 1 postgres postgres 79K Sep 7 14:38 gistproc.o

-rw-r--r-- 1 postgres postgres 9.1K Jun 10 03:29 gistscan.c

-rw------- 1 postgres postgres 848 Sep 7 14:42 gistscan.gcda

-rw-r--r-- 1 postgres postgres 6.7K Sep 7 14:38 gistscan.gcno

-rw-r--r-- 1 postgres postgres 60K Sep 7 14:38 gistscan.o

-rw-r--r-- 1 postgres postgres 24K Jun 10 03:29 gistsplit.c

-rw------- 1 postgres postgres 1.5K Sep 7 14:42 gistsplit.gcda

-rw-r--r-- 1 postgres postgres 15K Sep 7 14:38 gistsplit.gcno

-rw-r--r-- 1 postgres postgres 68K Sep 7 14:38 gistsplit.o

-rw-r--r-- 1 postgres postgres 21K Jun 10 03:29 gistutil.c

-rw------- 1 postgres postgres 2.2K Sep 7 14:42 gistutil.gcda

-rw-r--r-- 1 postgres postgres 20K Sep 7 14:38 gistutil.gcno

-rw-r--r-- 1 postgres postgres 84K Sep 7 14:38 gistutil.o

-rw-r--r-- 1 postgres postgres 7.1K Jun 10 03:29 gistvacuum.c

-rw------- 1 postgres postgres 784 Sep 7 14:42 gistvacuum.gcda

-rw-r--r-- 1 postgres postgres 7.3K Sep 7 14:38 gistvacuum.gcno

-rw-r--r-- 1 postgres postgres 56K Sep 7 14:38 gistvacuum.o

-rw-r--r-- 1 postgres postgres 14K Jun 10 03:29 gistxlog.c

-rw------- 1 postgres postgres 1.2K Sep 7 14:42 gistxlog.gcda

-rw-r--r-- 1 postgres postgres 12K Sep 7 14:38 gistxlog.gcno

-rw-r--r-- 1 postgres postgres 50K Sep 7 14:38 gistxlog.o

-rw-r--r-- 1 postgres postgres 538 Jun 10 03:29 Makefile

-rw-r--r-- 1 postgres postgres 357 Sep 7 14:38 objfiles.txt

-rw-r--r-- 1 postgres postgres 20K Jun 10 03:29 README

postgres@digoal-> pwd

/opt/soft_bak/postgresql-9.4.4/src/backend/access/gist

注意，源码文件目录的权限需要改为数据库启动用户的权限，否则无法修改.gcda的值，也就无法获取代码被调用的次数了。

root@digoal-> chown -R postgres:postgres /opt/soft_bak/postgresql-9.4.4

接下来我们看看文件的变化，以dbsize.c中的两个获取pg_database_size的C函数为例：

postgres@digoal-> ls -la|grep dbsize

-rw-r--r-- 1 postgres postgres 19342 Jun 10 03:29 dbsize.c

-rw------- 1 postgres postgres 2664 Sep 7 15:01 dbsize.gcda

-rw-r--r-- 1 postgres postgres 23272 Sep 7 14:38 dbsize.gcno

-rw-r--r-- 1 postgres postgres 89624 Sep 7 14:38 dbsize.o

调用一次


postgres@digoal-> psql
psql (9.4.4)
Type "help" for help.
postgres=# select pg_database_size(oid) from pg_database;
 pg_database_size 
------------------
          6898180
          6889988
         24742560
          6898180
          6898180
          6898180
(6 rows)
postgres=# \q

再次查看

postgres@digoal-> ls -la|grep dbsize

-rw-r--r-- 1 postgres postgres 19342 Jun 10 03:29 dbsize.c

-rw------- 1 postgres postgres 2664 Sep 7 15:12 dbsize.gcda

-rw-r--r-- 1 postgres postgres 23272 Sep 7 14:38 dbsize.gcno

-rw-r--r-- 1 postgres postgres 89624 Sep 7 14:38 dbsize.o

dbsize.gcda文件的修改时间发送了变化，说明刚才我们调用pg_database_size(oid)时，调用了dbsize.c中的代码。对应的行计数器会发生变化。

接下来我们生成html

$ mkdir html

$ cd html

$ lcov --directory /opt/soft_bak/postgresql-9.4.4 --capture --output-file ./app.info

// 如果你不需要所有的代码，修改以上目录即可，譬如只看contrib下面的代码覆盖率。

$ genhtml ./app.info

postgres@digoal-> ll

total 3.7M

drwxrwxr-x 12 postgres postgres 4.0K Sep 7 15:02 access

-rw-rw-r-- 1 postgres postgres 141 Sep 7 15:02 amber.png

-rw-rw-r-- 1 postgres postgres 3.4M Sep 7 15:02 app.info

drwxrwxr-x 2 postgres postgres 4.0K Sep 7 15:02 bootstrap

drwxrwxr-x 2 postgres postgres 4.0K Sep 7 15:02 catalog

drwxrwxr-x 2 postgres postgres 4.0K Sep 7 15:02 commands

-rw-rw-r-- 1 postgres postgres 141 Sep 7 15:02 emerald.png

drwxrwxr-x 2 postgres postgres 12K Sep 7 15:02 executor

drwxrwxr-x 2 postgres postgres 4.0K Sep 7 15:02 foreign

-rw-rw-r-- 1 postgres postgres 9.7K Sep 7 15:02 gcov.css

-rw-rw-r-- 1 postgres postgres 167 Sep 7 15:02 glass.png

-rw-rw-r-- 1 postgres postgres 57K Sep 7 15:02 index.html

-rw-rw-r-- 1 postgres postgres 57K Sep 7 15:02 index-sort-f.html

-rw-rw-r-- 1 postgres postgres 57K Sep 7 15:02 index-sort-l.html

drwxrwxr-x 2 postgres postgres 4.0K Sep 7 15:02 lib

drwxrwxr-x 2 postgres postgres 4.0K Sep 7 15:02 libpq

drwxrwxr-x 2 postgres postgres 4.0K Sep 7 15:02 main

drwxrwxr-x 2 postgres postgres 4.0K Sep 7 15:02 nodes

drwxrwxr-x 3 postgres postgres 4.0K Sep 7 15:02 opt

drwxrwxr-x 7 postgres postgres 4.0K Sep 7 15:02 optimizer

drwxrwxr-x 2 postgres postgres 4.0K Sep 7 15:02 parser

drwxrwxr-x 2 postgres postgres 4.0K Sep 7 15:02 port

drwxrwxr-x 2 postgres postgres 4.0K Sep 7 15:02 postmaster

drwxrwxr-x 2 postgres postgres 4.0K Sep 7 15:02 regex

drwxrwxr-x 3 postgres postgres 4.0K Sep 7 15:02 replication

drwxrwxr-x 2 postgres postgres 4.0K Sep 7 15:02 rewrite

-rw-rw-r-- 1 postgres postgres 141 Sep 7 15:02 ruby.png

drwxrwxr-x 3 postgres postgres 4.0K Sep 7 15:02 snowball

-rw-rw-r-- 1 postgres postgres 141 Sep 7 15:02 snow.png

drwxrwxr-x 10 postgres postgres 4.0K Sep 7 15:02 storage

drwxrwxr-x 2 postgres postgres 4.0K Sep 7 15:02 tcop

drwxrwxr-x 2 postgres postgres 4.0K Sep 7 15:02 tsearch

-rw-rw-r-- 1 postgres postgres 117 Sep 7 15:02 updown.png

drwxrwxr-x 3 postgres postgres 4.0K Sep 7 15:02 usr

drwxrwxr-x 14 postgres postgres 4.0K Sep 7 15:02 utils

输出的HTML报告图例，

行数的覆盖率，函数的覆盖率。

每个目录下的覆盖率。

调用pg_database_size前，你会发现这两个函数没有被覆盖到，说明PG自己的回归测试可能没有覆盖这两个函数，或者我们在安装PG时没有使用make check来进行回归测试。

在我们调用pg_database_size(oid)和(name)后，重新生成app.info文件和html。

这两个函数被调用到了。第二列是调用次数，说明pg_database_size_oid被调用了6次。pg_database_size_name被调用了一次，我们前面的测试省略了一些SQL没有列出。

最后，PostgreSQL其实已经在Makefile提供了生成代码覆盖HTML的target。


[root@digoal postgresql-9.4.4]# make coverage-html

产生的html目录如下：

[root@digoal postgresql-9.4.4]# cd coverage

[root@digoal coverage]# ll

total 224

-rw-r--r-- 1 root root 141 Sep 7 19:17 amber.png

-rw-r--r-- 1 root root 141 Sep 7 19:17 emerald.png

-rw-r--r-- 1 root root 9893 Sep 7 19:17 gcov.css

-rw-r--r-- 1 root root 167 Sep 7 19:17 glass.png

-rw-r--r-- 1 root root 58737 Sep 7 19:18 index.html

-rw-r--r-- 1 root root 58730 Sep 7 19:18 index-sort-f.html

-rw-r--r-- 1 root root 58730 Sep 7 19:18 index-sort-l.html

-rw-r--r-- 1 root root 141 Sep 7 19:17 ruby.png

-rw-r--r-- 1 root root 141 Sep 7 19:17 snow.png

drwxr-xr-x 11 root root 4096 Sep 7 19:18 src

-rw-r--r-- 1 root root 117 Sep 7 19:17 updown.png

drwxr-xr-x 3 root root 4096 Sep 7 19:18 usr

target见makefile：

src/Makefile.global

############################################################################ Coverage# Explanation of involved files:# foo.c source file# foo.o object file# foo.gcno gcov graph (a.k.a. "notes") file, created at compile time# (by gcc -ftest-coverage)# foo.gcda gcov data file, created when the program is run (for# programs compiled with gcc -fprofile-arcs)# foo.c.gcov gcov output file with coverage information, created by# gcov from foo.gcda (by "make coverage")# foo.c.gcov.out stdout captured when foo.c.gcov is created, mildly# interesting# lcov.info lcov tracefile, built from gcda files in one directory,# later collected by "make coverage-html"ifeq ($(enable_coverage), yes)# There is a strange interaction between lcov and existing .gcov# output files. Hence the rm command and the ordering dependency.gcda_files := $(wildcard *.gcda)lcov.info: $(gcda_files) rm -f *.gcov $(if $^,$(LCOV) -d . -c -o $@ $(LCOVFLAGS) --gcov-tool $(GCOV))%.c.gcov: %.gcda | lcov.info $(GCOV) -b -f -p -o . $(GCOVFLAGS) $*.c >$*.c.gcov.outcoverage: $(gcda_files:.gcda=.c.gcov) lcov.info.PHONY: coverage-htmlcoverage-html: coverage rm -rf coverage mkdir coverage $(GENHTML) --show-details --legend --output-directory=coverage --title=PostgreSQL --num-spaces=4 --prefix=$(abs_top_srcdir) `find . -name lcov.info -print`# hook for clean-upclean distclean maintainer-clean: clean-coverage.PHONY: clean-coverageclean-coverage: rm -rf coverage rm -f *.gcda *.gcno lcov.info *.gcov *.gcov.out# User-callable target to reset counts between test runscoverage-clean: rm -f `find . -name '*.gcda' -print`endif # enable_coverage

所以每次对代码改动后，执行完make check或其他回归测试手段后，就可以执行make coverage-html了。

[参考]

1. http://magustest.com/blog/whiteboxtesting/using-gcov-lcov/

2. http://ltp.sourceforge.net/coverage/lcov.php

3. http://ltp.sourceforge.net/coverage/lcov/readme.php

4. http://blog.163.com/digoal@126/blog/static/16387704020158792814297/

5. http://blog.csdn.net/livelylittlefish/article/details/6321861

6. https://github.com/linux-test-project/ltp

7. https://gcc.gnu.org/onlinedocs/gcc/Gcov.html

8. https://wiki.postgresql.org/wiki/CodeCoverage

9. http://www.postgresql.org/docs/devel/static/regress-coverage.html

原文地址：http://blog.163.com/digoal@126/blog/static/1638770402015875295989/

0 0