(OK) 运行cBPM in Fedora23

###--- 第1步：在Fedora23上安装Codelocks 16.01的过程。

参考：http://blog.chinaunix.net/uid-14735472-id-5671522.html

###--- 第2步：install xerces-c

dnf install xerces*
cp /lib64/libxerces-c-3.1.so /opt/cBPM/criteria-lin/lib/libxerces-c-3.1.so

------------上面两条命令即可，下面是源代码安装，仅供参考：xerces-c-3.1.2.tar.gz
[root@localhost xerces-c-3.1.2]# pwd
/opt/cBPM/xerces-c-3.1.2
[root@localhost xerces-c-3.1.2]# ./configure --prefix=/opt/cBPM/xerces-c
[root@localhost xerces-c-3.1.2]# make -j
[root@localhost xerces-c-3.1.2]# ll src/.libs/libxerces-c-3.1.so
-rwxr-xr-x. 1 root root 25155928 9月  24 09:11 src/.libs/libxerces-c-3.1.so
[root@localhost xerces-c-3.1.2]# cp src/.libs/libxerces-c-3.1.so /opt/cBPM/criteria-lin/lib/
------------------------------------------------------------------------

###--- 第3步： 设置codeblocks 参数

参考：http://blog.chinaunix.net/uid-14735472-id-5204752.html

###--- 第4步：install fastcgi

wget http://www.fastcgi.com/dist/fcgi.tar.gz
tar -zxvf fcgi.tar.gz
cd fcgi-2.4.1-SNAP-0311112127
vi include/fcgio.h

在include/fcgio.h文件中加上 #include <cstdio>，然后再编译安装就通过了。

make -j5
make install

###--- 第5步：install mariadb

dnf install mysql mysql-server mysql-*

###--- 第6步：install nginx

dnf install nginx
root document dir: /usr/share/nginx/html

###--- 第7步：install spawn-fcgi

dnf install spawn-fcgi

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
运行cBPM in Fedora23    ————运行cBPM in CentOS7(http://blog.chinaunix.net/uid-14735472-id-5587052.html)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


###--- 第8步：编译cBPM

-----------------------------------
在codeblocks中编译cBPM成功后 (参考：http://blog.chinaunix.net/uid-14735472-id-5204752.html)，

gedit /etc/ld.so.conf
最后一行添加：
/opt/cBPM/criteria-lin/lib
保存退出，然后运行 ldconfig 即可。

[root@localhost lib]# pwd
/opt/cBPM/criteria-lin/lib
[root@localhost lib]# ls
executer  libLibraries.so  libWorkflowEngineD.so  libxerces-c-3.1.so

[root@localhost lib]# cp executer /usr/share/nginx/html

cp /opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor/executer /usr/share/nginx/html
cp /opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor/executer /opt/cBPM/criteria-lin/lib

-----------------------------------

###--- 第9步：启动nginx

setsebool -P mysql_connect_http 1
setsebool -P named_tcp_bind_http_port 1
setsebool -P httpd_can_network_connect 1

grep nginx /var/log/audit/audit.log | audit2allow -M mypol
semodule -i mypol.pp

systemctl start nginx.service
systemctl stop nginx.service
systemctl restart nginx.service

cp /etc/nginx/nginx.conf /etc/nginx/nginx.conf.bac
gedit /etc/nginx/nginx.conf         内容如下：

    #user nobody;    worker_processes 1;    #error_log logs/error.log;    #error_log logs/error.log notice;    #error_log logs/error.log info;    #pid logs/nginx.pid;    events {        worker_connections 1024;    }    http {        #fastcgi_connect_timeout 300; fastcgi_send_timeout 300; fastcgi_read_timeout 300;        include mime.types;        default_type application/octet-stream;        #log_format main '$remote_addr - $remote_user [$time_local] "$request" '        # '$status $body_bytes_sent "$http_referer" '        # '"$http_user_agent" "$http_x_forwarded_for"';        #access_log logs/access.log main;        sendfile on;        #tcp_nopush on;        #keepalive_timeout 0;        keepalive_timeout 65;        #gzip on;        server {            listen 9090;            server_name localhost;            #charset koi8-r;            #access_log logs/host.access.log main;                        location / {                 if ($request_method = 'OPTIONS') {                    add_header 'Access-Control-Allow-Origin' '*';                    #                    # Om nom nom cookies                    #                    #add_header 'Access-Control-Allow-Credentials' 'true';                    add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS';                    #                    # Custom headers and headers various browsers *should* be OK with but aren't                    #                    add_header 'Access-Control-Allow-Headers' 'DNT,X-CustomHeader,Keep-Alive,User-Agent,X-Requested-With,If-Modified-Since,Cache-Control,Content-Type';                    #                    # Tell client that this pre-flight info is valid for 20 days                    #                    add_header 'Access-Control-Max-Age' 1728000;                    add_header 'Content-Type' 'text/plain charset=UTF-8';                    add_header 'Content-Length' 0;                    return 204;                 }                 if ($request_method = 'POST') {                    add_header 'Access-Control-Allow-Origin' '*';                    #add_header 'Access-Control-Allow-Credentials' 'true';                    add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS';                    add_header 'Access-Control-Allow-Headers' 'DNT,X-CustomHeader,Keep-Alive,User-Agent,X-Requested-With,If-Modified-Since,Cache-Control,Content-Type';                 }                 if ($request_method = 'GET') {                    add_header 'Access-Control-Allow-Origin' '*';                    #add_header 'Access-Control-Allow-Credentials' 'true';                    add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS';                    add_header 'Access-Control-Allow-Headers' 'DNT,X-CustomHeader,Keep-Alive,User-Agent,X-Requested-With,If-Modified-Since,Cache-Control,Content-Type';                 }            }            location /criteria {                fastcgi_pass 127.0.0.1:8000;                root /usr/share/nginx/html;                index index.html index.htm;                                fastcgi_param GATEWAY_INTERFACE CGI/1.1;                fastcgi_param SERVER_SOFTWARE nginx;                fastcgi_param QUERY_STRING $query_string;                fastcgi_param REQUEST_METHOD $request_method;                fastcgi_param CONTENT_TYPE $content_type;                fastcgi_param CONTENT_LENGTH $content_length;                fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;                fastcgi_param SCRIPT_NAME $fastcgi_script_name;                fastcgi_param REQUEST_URI $request_uri;                fastcgi_param DOCUMENT_URI $document_uri;                fastcgi_param DOCUMENT_ROOT $document_root;                fastcgi_param SERVER_PROTOCOL $server_protocol;                fastcgi_param REMOTE_ADDR $remote_addr;                fastcgi_param REMOTE_PORT $remote_port;                fastcgi_param SERVER_NAME $server_name;            }            #error_page 404 /404.html;            # redirect server error pages to the static page /50x.html            #            error_page 500 502 503 504 /50x.html;            location = /50x.html {                root html;            }            # proxy the PHP scripts to Apache listening on 127.0.0.1:80            #            #location ~ \.php$ {            # proxy_pass http://127.0.0.1;            #}            # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000            #            #location ~ \.php$ {            # root html;            # fastcgi_pass 127.0.0.1:9000;            # fastcgi_index index.php;            # fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;            # include fastcgi_params;            #}            # deny access to .htaccess files, if Apache's document root            # concurs with nginx's one            #            #location ~ /\.ht {            # deny all;            #}        }        # another virtual host using mix of IP-, name-, and port-based configuration        #        #server {        # listen 8000;        # listen somename:8080;        # server_name somename alias another.alias;        # location / {        # root html;        # index index.html index.htm;        # }        #}        # HTTPS server        #        #server {        # listen 443 ssl;        # server_name localhost;        # ssl_certificate cert.pem;        # ssl_certificate_key cert.key;        # ssl_session_cache shared:SSL:1m;        # ssl_session_timeout 5m;        # ssl_ciphers HIGH:!aNULL:!MD5;        # ssl_prefer_server_ciphers on;        # location / {        # root html;        # index index.html index.htm;        # }        #}    }

systemctl start nginx.service
systemctl stop nginx.service
systemctl restart nginx.service

systemctl stop httpd.service

------------
systemctl start mariadb.service

# pwd

/opt/cBPM/criteria-lin/database/scripts/mysql

# mysqladmin -u root -p create criteria

# mysql -uroot -p criteria < criteria_mysql.sql

mysqladmin -u root -p password '123456'
------------
[root@localhost recieve form Maurizio Farina]# pwd
/opt/cBPM/recieve form Maurizio Farina
[root@localhost recieve form Maurizio Farina]# cp -r html /usr/share/nginx/html
[root@localhost html]# chmod 755 -R /usr/share/nginx/html
------------

++++++++++++++++++++++++++++++++++++++++

问题：Criteria session Initialization [KO].Error[Unknow Error]. Exit.
解决：cp /opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor/database/ /usr/share/nginx/html -r

问题：black bar in browser
解决：（注意 大小写）
cd /usr/share/nginx/html
mv Scripts/JavaScript/Vendor/AngularFormBuilder Scripts/JavaScript/Vendor/AngularFormbuilder

问题：the right area is blank in home
解决：
+++++++++++++++++++++++++++++++++++++
/opt/cBPM/criteria-lin/src/Criteria/Criteria.WorkflowEngine/DataBase/FileSystemDataBase.cpp
        CM_TRACE_CODEPATH("TemplatesFolder [" << fsConnection.getProcessTemplatesFolder().c_str() << "]")    //ztg add
        //bOS::IO::FileSystem::ls(fsConnection.getProcessTemplatesFolder().c_str(), files,".xml");
        bOS::IO::FileSystem::ls("/usr/share/nginx/html/database/processTemplate/", files,".xml");
+++++++++++++++++++++++++++++++++++++
/opt/cBPM/criteria-lin/src/Criteria/Criteria.Libraries.bOS/IO/bOSFileSystem.cpp
void FileSystem::ls(const String& sDir, FilesList& files, const char* acExtension)
+++++++++++++++++++++++++++++++++++++

MariaDB [criteria]> delete from SF_WorkflowProcesses;
MariaDB [criteria]> delete from SF_Attributes;
MariaDB [criteria]> delete from SF_Activities;
MariaDB [criteria]> select * from SF_WorkflowProcesses;

+++++++++++++++++++++++++++++++++++++注意：先只放这两个xml文件
[root@localhost html]# ls database/processTemplate/
HeatingRepair.xml  TestNotePad.xml
+++++++++++++++++++++++++++++++++++++
iptables -F

export WF_HOME=/usr/share/nginx/html; export CRITERIA_HOME=/usr/share/nginx/html

[root@localhost html]# pwd
/usr/share/nginx/html

systemctl start nginx.service
systemctl stop nginx.service
systemctl restart nginx.service

spawn-fcgi -p 8000 -n executer
# spawn-fcgi -a 127.0.0.1 -p 8000 -n /usr/share/nginx/html/executer

--------if wrong, use the following commands
tail -f /var/log/nginx/error.log
less /var/log/nginx/access.log
--------
less /var/log/nginx/error.log
错误如下(表面错误：the right area is blank in home)：
*15 connect() to 127.0.0.1:8000 failed (13: Permission denied) while connecting to upstream, client: 127.0.0.1, server: localhost, request: "GET /criteria/processes/instances HTTP/1.1", upstream: "fastcgi://127.0.0.1:8000", host: "localhost:9090", referrer: "http://localhost:9090/"
解决方法：
setsebool -P httpd_can_network_connect 1
--------


至此，OK



++++++++++++++++++++++++下面不用看

http://serverfault.com/questions/236795/restart-spawn-fcgi

how can i restart spawn-fcgi on nginx server?
Run it with option -P to store the PID in some temp file. For example:
/usr/local/bin/spawn-fcgi -a 127.0.0.1 -p 9000 -P /var/run/fcgi.pid
Then you can kill it by this pid:
kill -9 `cat /var/run/fcgi.pid`

How was the process for spawn-fcgi started, was it by a command line (manually) or using a rc-script. In either case you can kill the process by first finding the PID
Use the command ps aux | grep spawn-fcgi to locate the process and the command kill -9 PID
I recommend slashdot's recommendation of using the rc-script to start and end your spawn-fcgi process.

Update: This answer randomly failed on me (I'm not sure why) but I'm leaving this here because it might help someone.
killall -9 -w php-cgi
The "-w" waits. Because if you try to (re)start spawn-fcgi too soon (without a delay) spawn-fcgi always gave me error, something like "...already in use." (I don't remember the exact error, sorry.) However, "-w" doesn't work 100% of the time if you plan to put this in cron. After months of random php failures I decided to switch to php-fpm, which has its own unique problems--proceed with caution.
++++++++++++++++++++++++
/opt/cBPM/criteria-lin/src/Criteria/Criteria.WorkflowEngine/DataBase/FileSystemDataBase.cpp
        CM_TRACE_CODEPATH("TemplatesFolder [" << fsConnection.getProcessTemplatesFolder().c_str() << "]")    //ztg add
        //bOS::IO::FileSystem::ls(fsConnection.getProcessTemplatesFolder().c_str(), files,".xml");
        bOS::IO::FileSystem::ls("/usr/share/nginx/html/database/processTemplate/", files,".xml");
++++++++++++++++++++++++
/opt/cBPM/criteria-lin/src/Criteria/Criteria.WorkflowEngine/WAPI/WAPI.cpp
    String sDirectory = "/usr/share/nginx/html";
        String sWfHome = "/usr/share/nginx/html";