Digogo ugdx文件的制作
来源:互联网 发布:UC数据库设计 编辑:程序博客网 时间:2024/04/30 22:34
The openplatform source code is in old IT FTP server at "vte/KCD/20150814/openplatform_wallace.tar.gz".
There is currently no easy to write eMMC_LD into unit. In order to test modified eMMC_LD, you need to use the openplatform source, build the Linux kernel, and pack the system image and then write the image into unit using the production tool.
Please first get the above source code, and then try compiling it and pack it.
To setup the Linux source code:
- Unzip the openplatform_wallace.tar.gz in Linux environment.
- change directory to "openplatform/codepack"
- type "mkdir Bundle"
- download the "BBT_Bundle_GBeng_1688.bin" and then copy it to the above "Bundle" directory.
To compile the source and pack the image file, please do the following:
- change to the openplatform base directory.
- type "./mk dev"
- type "./mk others"
- type "./mk dev" again
To pack image file, please do the following:
- change to the openplatform base directory.
- type "./mk codepack GBeng 99 1688"
- There will be a .ugdx file created in the "codepack/eMMC/output" directory.
To write the image file into 1688 unit:
- put the .ugdx file into the "UGDX" directory of 1688 bootable SD card.
- run the tool "eMMCWriter_UGDX" tool.
There is currently no easy to write eMMC_LD into unit. In order to test modified eMMC_LD, you need to use the openplatform source, build the Linux kernel, and pack the system image and then write the image into unit using the production tool.
Please first get the above source code, and then try compiling it and pack it.
To setup the Linux source code:
- Unzip the openplatform_wallace.tar.gz in Linux environment.
- change directory to "openplatform/codepack"
- type "mkdir Bundle"
- download the "BBT_Bundle_GBeng_1688.bin" and then copy it to the above "Bundle" directory.
To compile the source and pack the image file, please do the following:
- change to the openplatform base directory.
- type "./mk dev"
- type "./mk others"
- type "./mk dev" again
To pack image file, please do the following:
- change to the openplatform base directory.
- type "./mk codepack GBeng 99 1688"
- There will be a .ugdx file created in the "codepack/eMMC/output" directory.
To write the image file into 1688 unit:
- put the .ugdx file into the "UGDX" directory of 1688 bootable SD card.
- run the tool "eMMCWriter_UGDX" tool.
0 0
- Digogo ugdx文件的制作
- makefile文件的制作
- 文件下载的制作
- makefile文件的制作
- 制作JDebugTool的授权文件制作机
- dll文件的c++制作dll文件的c++制作
- 制作可执行的jar文件
- 制作jar文件的方法
- 制作bat文件的方法
- 制作bat文件的方法
- 制作bat文件的方法
- 制作PDF文件的软件
- 制作水印的srt文件
- 制作bat文件的方法
- java启动文件的制作
- 制作ico文件的网站
- linux库文件的制作
- 制作可执行的jar文件
- Jmeter基础(一)---元件作用域与执行顺序
- PHP添加新模块
- 安卓登录界面让输入框滚动到指定位置的方法
- 文章标题
- nodejs meanjs meanio yo等
- Digogo ugdx文件的制作
- Spring 中数据源和数据库连接池配置的几种方法
- 白平衡算法---色温曲线
- 安卓保存图片到相册
- go语言scan空值报错
- Unity3D 游戏贴图(法线贴图,漫反射贴图,高光贴图)
- easyui扩展 - 最大长度限制
- nf_conntrack: table full, dropping packet 连接跟踪表已满,开始丢包 的解决办法
- c#实现大数相加(字符串) string AddBig(string a, string b)