ACER+EFI+WIN10+UBUNTU宏基笔记本双系统
来源:互联网 发布:淘宝asics旗舰店真假 编辑:程序博客网 时间:2024/04/27 03:15
not sure turn off windows fast start-up necessary
for sure not necessary disable Secure Boot in bios in my case <a lot of advice stress the importance of this
I try to recap my solving (for computer laptop acer E5)
(after installed xubuntu)
turn on and press F2, bios come up (mine called InsydeH20 setup utility rev. 5.0)
go to page Security
go to "Set Supervisor Password" press ENTER (I set pass "a")
go to "Select an UEFI file as trusted for executing:" press ENTER
a new page appear with listed:
HDD0
HDD0
press ENTER on the first HDD0 and see if a sub list with the name "<EFI>" comes up (in my case did not show <EFI> but: recycle bin and system volume info)
press ENTER on the second HDD0 and see if a sub list with <EFI> comes up (in my case showed <EFI> and <boot-sav>)
press ENTER on <EFI>, new list comes
press ENTER on<ubuntu>, new list comes with:
shimx64.efi
grubx64.efi
MokManager.efi
press enter on each one and give them a for you recognizable name (I used "xubuntushimx64efi", "xubuntugrubx64efi", "xubuntuMokManagerefi")
and press Yes
save and exit
go back in bios f2
go to "Set Supervisor Password" and set pass to nill-blank (you want to eliminate a not necessary password that you could forget...)
go to "boot page" tab
you should find the named shimx64.efi, grubx64.efi, MokManager.efi
bring them up in the priority boot list (above windows if you want ubuntu default system)
go to page main - enable F12 boot menu
save and exit
for sure not necessary disable Secure Boot in bios in my case <a lot of advice stress the importance of this
I try to recap my solving (for computer laptop acer E5)
(after installed xubuntu)
turn on and press F2, bios come up (mine called InsydeH20 setup utility rev. 5.0)
go to page Security
go to "Set Supervisor Password" press ENTER (I set pass "a")
go to "Select an UEFI file as trusted for executing:" press ENTER
a new page appear with listed:
HDD0
HDD0
press ENTER on the first HDD0 and see if a sub list with the name "<EFI>" comes up (in my case did not show <EFI> but: recycle bin and system volume info)
press ENTER on the second HDD0 and see if a sub list with <EFI> comes up (in my case showed <EFI> and <boot-sav>)
press ENTER on <EFI>, new list comes
press ENTER on<ubuntu>, new list comes with:
shimx64.efi
grubx64.efi
MokManager.efi
press enter on each one and give them a for you recognizable name (I used "xubuntushimx64efi", "xubuntugrubx64efi", "xubuntuMokManagerefi")
and press Yes
save and exit
go back in bios f2
go to "Set Supervisor Password" and set pass to nill-blank (you want to eliminate a not necessary password that you could forget...)
go to "boot page" tab
you should find the named shimx64.efi, grubx64.efi, MokManager.efi
bring them up in the priority boot list (above windows if you want ubuntu default system)
go to page main - enable F12 boot menu
save and exit
0 0
- ACER+EFI+WIN10+UBUNTU宏基笔记本双系统
- Acer宏基笔记本FN快捷键大全
- 笔记本装win10和ubuntu双系统
- efi win10 ubuntu安装
- 宏基(Acer)笔记本(5583)拆机清洗风扇
- 宏基(Acer)笔记本(5583)拆机清洗风扇
- acer笔记本装金泰克SSD&重装win10系统
- EFI引导win8 + ubuntu双系统
- 亲测UEFI启动模式的电脑安装Win10和Ubuntu双系统(dell笔记本和hp笔记本)
- 宏基笔记本
- Ubuntu和Win10双系统
- 【双系统】Win10引导Ubuntu
- Win10安装Ubuntu双系统
- ubuntu win10双系统
- win10+ubuntu双系统配置
- 宏基Acer笔记本预装win8系统换成win7系统安装教程
- UEFI下装Ubuntu Win10 双系统
- win10+Ubuntu双系统 Easybcd安装
- 二叉搜索树
- JavaSE 之 ----- Socket 使用
- 你见过哪些怦然心动的美女图片?
- 如何升级cocos2d-x来支持ipv6以及socket怎么支持ipv6
- 【Leetcode】之Combinations
- ACER+EFI+WIN10+UBUNTU宏基笔记本双系统
- python 全排列算法实现
- pandas数据结构基础
- 100个常用的Linux命令
- Material Design之CollapsingToolbarLayout 和 TabLayout使用
- python网络爬虫学习(六)利用Pyspider+Phantomjs爬取淘宝模特图片
- 开发稳定的应用的技巧
- 原型可用性测试知多少?
- 半环