安装ZooKeeper
来源:互联网 发布:mac怎么同时登陆2个qq 编辑:程序博客网 时间:2024/05/24 01:48
http://zookeeper.apache.org/releases.html
当前stable版是zookeeper-3.4.6
3.解压
tar –xf zookeeper-3.4.6.tar.gz
解压文件到"/usr/local/zookeeper-3.4.6".
4.复制conf目录下的zoo_sample.cfg,并命名为zoo.cfg
5.修改zoo.cfg配置文件
# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just
# example sakes.
dataDir=/datatmp/zookeeper/data
dataLogDir=/datatmp/zookeeper/logs
# the port at which the clients will connect
clientPort=2181
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1
#2888,3888 are election port
server.1=zookeeper:2888:38888
其中,2888端口号是服务之间通信的端口,而3888是;zookeeper与其他应用程序通信的端口.而zookeeper是在hosts中已映射了本机的IP.
initLimit:这个配置项是用来配置Zookeeper接受客户端(这里所说的客户端不是用户连接Zookeeper服务器的客户端,而是Zookeeper服务器集群中连接到 Leader 的 Follower 服务器)初始化连接时最长能忍受多少个心跳时间间隔数。当已经超过 10 个心跳的时间(也就是 tickTime)长度后 Zookeeper 服务器还没有收到客户端的返回信息,那么表明这个客户端连接失败。总的时间长度就是 5*2000=10 秒。
syncLimit:这个配置项标识 Leader 与 Follower 之间发送消息,请求和应答时间长度,最长不能超过多少个 tickTime 的时间长度,总的时间长度就是 2*2000=4 秒。
server.A=B:C:D:其中 A 是一个数字,表示这个是第几号服务器;B 是这个服务器的 ip 地址;C 表示的是这个服务器与集群中的 Leader 服务器交换信息的端口;D 表示的是万一集群中的 Leader 服务器挂了,需要一个端口来重新进行选举,选出一个新的 Leader,而这个端口就是用来执行选举时服务器相互通信的端口。如果是伪集群的配置方式,由于 B 都是一样,所以不同的 Zookeeper 实例通信端口号不能一样,所以要给它们分配不同的端口号。
6.创建dataDir参数指定的目录(这里指的是“ /datatmp/zookeeper/data”),并在目录下创建文件,命名为“myid”。
7.编辑“myid”文件,并在对应的IP的机器上输入对应的编号。如在zookeeper上,“myid”文件内容就是1。由于本次只在单点上进行安装配置,所以只有一个server.1。若还有其他服务器,比如地址为192.168.1.102,则在zoo.cfg文件中还需加入server.2=192.168.1.102:2888:3888。那么myid文件在192.168.1.102服务器上的内容就是2。至此,如果是多服务器配置,就需要将zookeeper-3.4.3目录拷贝到其他服务器,然后按照上述的方法修改myid。
8.在/etc/profile文件中设置PATH
修改profile文件:
sudo vi /etc/profile
export ZOOKEEPER_HOME=/home/hadooptest/zookeeper-3.4.3export PATH=$ZOOKEEPER_HOME/bin:$PATHexport PATH
OH YEAH!!! 安装完毕!
安装好了,启动搞搞.
1.启动
zookeeper-3.4.6/bin/zkServer.sh start
1573 QuorumPeerMain1654 Jps
其中,QuorumPeerMain是zookeeper进程,启动正常。
3、查看状态:zookeeper-3.4.3/bin/zkServer.sh status
-JMX enabled by defaultUsing config: /usr/local/zookeeper-3.4.6/bin/../conf/zoo.cfgMode: standalone
4、启动客户端脚本:zookeeper-3.4.3/bin/zkCli.sh -server zookeeper:2181
5、停止zookeeper进程:zookeeper-3.4.3/bin/zkServer.sh stop
- zookeeper安装
- Zookeeper安装
- zookeeper安装
- zookeeper安装
- zookeeper安装
- zookeeper安装
- zookeeper安装
- zookeeper安装
- zookeeper安装
- Zookeeper:安装
- ZooKeeper安装
- zookeeper安装
- zookeeper安装
- 安装Zookeeper
- zookeeper 安装
- Zookeeper 安装
- 安装ZooKeeper
- zookeeper安装
- Android Socket通讯
- Linux 字符设备驱动开发基础(四)—— ioctl() 函数解析
- BZOJ4555: [Tjoi2016&Heoi2016]求和
- Linux 字符设备驱动开发基础(一)—— 编写简单 LED 设备驱动
- maven学习(五)
- 安装ZooKeeper
- ubuntu 搜狗输入法安装
- 安装JStorm2.1.1
- Hi3515按键中断驱动程序
- 安装RocketMQ及配置测试
- 测试CXF支持的数据类型
- Linux 字符设备驱动结构(四)—— file_operations 结构体知识解析
- 《Linux内核设计与实现》--进程调度
- kali中安装中文输入法的方法