linux网卡报错设置
来源:互联网 发布:wind数据库 免费版 编辑:程序博客网 时间:2024/06/06 01:17
ifconfig...没有看到eth0.。然后重启网卡又报下面错误。故障现象:service network restartShutting down loopback insterface: [ OK ]Bringing up loopback insterface: [ OK ]Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]CentOS Linux解决Device eth0 does not seem to be present解决办法:首先,打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示:# vi /etc/udev/rules.d/70-persistent-net.rules# This file was automatically generated by the /lib/udev/write_net_rules# program, run by the persistent-net-generator.rules rules file.## You can modify it, as long as you keep each rule on a single# line, and change only the value of the NAME= key.# PCI device 0x1022:0x2000 (pcnet32)SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:97", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"# PCI device 0x1022:0x2000 (pcnet32)SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:17", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"记录下,eth1网卡的mac地址00:0c:29:50:bd:17接下来,打开/etc/sysconfig/network-scripts/ifcfg-eth0# vi /etc/sysconfig/network-scripts/ifcfg-eth0将 DEVICE="eth0" 改成 DEVICE="eth1" ,将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址 HWADDR="00:0c:29:50:bd:17"最后,重启网络# service network restart或者# /etc/init.d/network restart正常了。
0 0
- linux网卡报错设置
- 克隆后手动设置IP启动网卡报错
- Linux下设置网卡
- LINUX设置网卡
- Linux 网卡配置文件设置
- Linux 网卡设置命令
- Linux 网卡配置文件设置
- Linux虚拟机 网卡设置
- Linux设置网卡地址
- linux网卡设置配置
- linux设置网卡速率
- [LINUX] - 网卡设置
- linux设置IP网卡
- 网卡移植报错
- linux上两个常见的网卡报错
- Linux中修改网卡名字&修改IP地址报错
- LINUX网卡(设置网卡速度及模式)
- LINUX网卡(设置网卡速度及模式)
- UVA 575-Skew Binary
- Nginx模块开发-日志模型
- 简单总结Unity使用Resources类资源管理
- 敏捷开发之Scrum扫盲,及敏捷开发中XP与SCRUM的区别
- SDUTOJ 1294选票统计
- linux网卡报错设置
- hdu 1495 非常可乐
- 2016 Multi-University Training Contest 1
- Spring——IOC/DI理解
- UVA 10970-Big Chocolate
- 331. Verify Preorder Serialization of a Binary Tree
- 【leetcode】338. Counting Bits
- 深入浅出spring IOC中三种依赖注入方式
- 如何烧写Bubblegum-96 board