Java挑战高并发(2):线程中断
来源:互联网 发布:c语言函数类型有哪些 编辑:程序博客网 时间:2024/06/15 22:23
]
使用interrupt()中断线程
当一个线程运行时,另一个线程可以调用对应的Thread对象的interrupt()方法来中断它,该方法只是在目标线程中设置一个标志,表示它已经被中断,并立即返回。这里需要注意的是,如果只是单纯的调用interrupt()方法,线程并没有实际被中断,会继续往下执行。
下面一段代码演示了休眠线程的中断:
public class SleepInterrupt extends Object implements Runnable{ public void run(){ try{ System.out.println("in run() - about to sleep for 20 seconds"); Thread.sleep(20000); System.out.println("in run() - woke up"); }catch(InterruptedException e){ System.out.println("in run() - interrupted while sleeping"); //处理完中断异常后,返回到run()方法人口, //如果没有return,线程不会实际被中断,它会继续打印下面的信息 return; } System.out.println("in run() - leaving normally"); } public static void main(String[] args) { SleepInterrupt si = new SleepInterrupt(); Thread t = new Thread(si); t.start(); //主线程休眠2秒,从而确保刚才启动的线程有机会执行一段时间 try { Thread.sleep(2000); }catch(InterruptedException e){ e.printStackTrace(); } System.out.println("in main() - interrupting other thread"); //中断线程t t.interrupt(); System.out.println("in main() - leaving"); }}
运行结果如下:
待决中断
在上面的例子中,sleep()方法的实现检查到休眠线程被中断,它会相当友好地终止线程,并抛出InterruptedException异常。另外一种情况,如果线程在调用sleep()方法前被中断,那么该中断称为待决中断,它会在刚调用sleep()方法时,立即抛出InterruptedException异常。
下面的代码演示了待决中断:
public class PendingInterrupt extends Object { public static void main(String[] args){ //如果输入了参数,则在mian线程中中断当前线程(亦即main线程) if( args.length > 0 ){ Thread.currentThread().interrupt(); } //获取当前时间 long startTime = System.currentTimeMillis(); try{ Thread.sleep(2000); System.out.println("was NOT interrupted"); }catch(InterruptedException x){ System.out.println("was interrupted"); } //计算中间代码执行的时间 System.out.println("elapsedTime=" + ( System.currentTimeMillis() - startTime)); }}
如果PendingInterrupt不带任何命令行参数,那么线程不会被中断,最终输出的时间差距应该在2000附近(具体时间由系统决定,不精确),如果PendingInterrupt带有命令行参数,则调用中断当前线程的代码,但main线程仍然运行,最终输出的时间差距应该远小于2000,因为线程尚未休眠,便被中断,因此,一旦调用sleep()方法,会立即打印出catch块中的信息。执行结果如下:
这种模式下,main线程中断它自身。除了将中断标志(它是Thread的内部标志)设置为true外,没有其他任何影响。线程被中断了,但main线程仍然运行,main线程继续监视实时时钟,并进入try块,一旦调用sleep()方法,它就会注意到待决中断的存在,并抛出InterruptException。于是执行跳转到catch块,并打印出线程被中断的信息。最后,计算并打印出时间差。
使用isInterrupted()方法判断中断状态
public class InterruptCheck extends Object{ public static void main(String[] args){ Thread t = Thread.currentThread(); System.out.println("Point A: t.isInterrupted()=" + t.isInterrupted()); //待决中断,中断自身 t.interrupt(); System.out.println("Point B: t.isInterrupted()=" + t.isInterrupted()); System.out.println("Point C: t.isInterrupted()=" + t.isInterrupted()); try{ Thread.sleep(2000); System.out.println("was NOT interrupted"); }catch( InterruptedException x){ System.out.println("was interrupted"); } //抛出异常后,会清除中断标志,这里会返回false System.out.println("Point D: t.isInterrupted()=" + t.isInterrupted()); }}
运行结果如下:
这种模式下,main线程中断它自身。除了将中断标志(它是Thread的内部标志)设置为true外,没有其他任何影响。线程被中断了,但main线程仍然运行,main线程继续监视实时时钟,并进入try块,一旦调用sleep()方法,它就会注意到待决中断的存在,并抛出InterruptException。于是执行跳转到catch块,并打印出线程被中断的信息。最后,计算并打印出时间差。
使用Thread.interrupted()方法判断中断状态
可以使用Thread.interrupted()方法来检查当前线程的中断状态(并隐式重置为false)。又由于它是静态方法,因此不能在特定的线程上使用,而只能报告调用它的线程的中断状态,如果线程被中断,而且中断状态尚不清楚,那么,这个方法返回true。与isInterrupted()不同,它将自动重置中断状态为false,第二次调用Thread.interrupted()方法,总是返回false,除非中断了线程。
如下代码演示了Thread.interrupted()方法的使用:
public class InterruptReset extends Object { public static void main(String[] args) { System.out.println( "Point X: Thread.interrupted()=" + Thread.interrupted()); Thread.currentThread().interrupt(); System.out.println( "Point Y: Thread.interrupted()=" + Thread.interrupted()); System.out.println( "Point Z: Thread.interrupted()=" + Thread.interrupted()); }}
运行结果如下:
从结果中可以看出,当前线程中断自身后,在Y点,中断状态为true,并由Thread.interrupted()自动重置为false,那么下次调用该方法得到的结果便是false。
补充
- Java挑战高并发(2):线程中断
- Java挑战高并发(4):守护线程与线程阻塞的四种情况
- java挑战高并发(9):死锁
- java挑战高并发(7):java 线程中yield的用法
- Java高并发--停止线程和中断线程
- Java并发编程(2):线程中断(含代码)
- Java并发总结(三):中断线程
- Java并发总结(三):中断线程
- Java并发(3)-中断线程
- java并发编程(二)-- 线程中断
- (十三)java并发编程--线程中断
- Java挑战高并发(3) 线程挂起、恢复与终止的正确方法(含代码)
- java挑战高并发 之(10):使用wait/notify/notifyAll实现线程间通信的几点重要说明
- java挑战高并发(12):ThreadLocal那些事儿
- java线程高并发
- Java并发之线程中断
- 【java并发】基础(2)--线程中断和终止
- java多线程并发(三)(中断线程)
- 堆排序
- 最长公共子序列求解:递归与动态规划方法
- Drupal7 配置经验整理
- Android三种基本的加载网络图片方式
- ubuntu之find方法
- Java挑战高并发(2):线程中断
- Java源码-色彩认知小程序(中英对照)
- 【学习笔记】Redis(5)-排序
- Hust oj 1053 Warcraft III(完全背包)
- (14)HTML标签详解之<h1>-<h6>
- oracle 动态SQL在存储过程中的使用
- 驱动程序无法通过使用安全套接字层(SSL)加密与 SQL Server 建立安全连接
- centos 链接不到网络
- 网站分类及构成