Linux-系统管理-ipmitool

[root@TL-QD-198 ~]# yum -y install OpenIPMI OpenIPMI-tools#就安装好ipmi的工具了。[root@TL-QD-198 ~]# chkconfig ipmi on[root@TL-QD-198 ~]# /etc/init.d/ipmi status[root@TL-QD-198 ~]# /etc/init.d/ipmi start#设置iDRAC的ip信息及启用IPMI网络控制[root@TL-QD-198 ~]# ipmitool -I open lan set 1 ipaddr 10.103.157.62   Setting LAN IP Address to 10.103.157.62You have new mail in /var/spool/mail/root[root@TL-QD-198 ~]# ipmitool -I open lan set 1 defgw ipaddr 10.103.157.254Setting LAN Default Gateway IP to 10.103.157.254[root@TL-QD-198 ~]# ipmitool -I open lan set 1 netmask 255.255.255.0Setting LAN Subnet Mask to 255.255.255.0[root@TL-QD-198 ~]# ipmitool -I open lan set 1 access on#修改IPMI的snmp信息#设置 SNMP community 串[root@TL-QD-198 ~]# ipmitool -I open lan set  snmp 1 'calvin'#设置 null 用户密码[root@TL-QD-198 ~]# ipmitool -I open lan set  password 1 'calvin'#设置 root 密码[root@TL-QD-198 ~]# ipmitool -I open user set password 2 'calvin'You have new mail in /var/spool/mail/root#可以用下免的命令检查刚才设定的值是否正确:[root@TL-QD-198 ~]# ipmitool -I open lan print 1#在下指令的时候可以用 “-E” ，[root@TL-QD-198 ~]# ipmitool -I lan -U root -E -H 192.168.111.123 chassis power statusChassis Power is on#如果要用交互的方式输入密码就用 “-a” 。[root@TL-QD-198 ~]# ipmitool -I lan -U root -a -H 192.168.111.123 chassis power statusPassword:Chassis Power is on#若想放在 script 内. 可以使用 “-P” 的方式加上密码明文。[root@TL-QD-198 ~]# ipmitool -I lan -U root -P “新密码” -H 192.168.111.123 chassis power statusChassis Power is on#其他操作## 开机 – Power On[root@TL-QD-198 ~]# ipmitool -I lan -U root -E -H 192.168.111.123 chassis power on## 强制断电关机 – Power Off[root@TL-QD-198 ~]# ipmitool -I lan -U root -E -H 192.168.111.123 chassis power off## 通过操作系统正常关机 – Graceful Shutdown[root@TL-QD-198 ~]# ipmitool -I lan -U root -E -H 192.168.111.123 chassis power soft## 重新热启动 – Reset System (warm boot)[root@TL-QD-198 ~]# ipmitool -I lan -U root -E -H 192.168.111.123 chassis power reset## 冷启动 – Power Cycle System (cold boot)[root@TL-QD-198 ~]# ipmitool -I lan -U root -E -H 192.168.111.123 chassis power cycle#其他信息## 检查电压电流# [root@TL-QD-198 ~]# ipmitool -I lan -U root -E -H 192.168.1.101 sdr type "Current"Current | 94h | ok | 10.1 | 2 AmpsCurrent | 95h | ns | 10.2 | DisabledSystem Level | 98h | ok | 7.1 | 245 Watts## 检查温度状态# [root@TL-QD-198 ~]# ipmitool -I lan -U root -E -H 192.168.1.101 sdr type "Temperature"Temp | 01h | ns | 3.1 | DisabledTemp | 02h | ns | 3.2 | DisabledTemp | 05h | ns | 10.1 | DisabledAmbient Temp | 07h | ns | 10.1 | DisabledTemp | 06h | ns | 10.2 | DisabledAmbient Temp | 08h | ns | 10.2 | DisabledAmbient Temp | 0Eh | ok | 7.1 | 16 degrees CPlanar Temp | 0Fh | ns | 7.1 | DisabledIOH THERMTRIP | 5Dh | ns | 7.1 | DisabledCPU Temp Interf | 76h | ns | 7.1 | DisabledTemp | 0Ah | ns | 8.1 | DisabledTemp | 0Bh | ns | 8.1 | DisabledTemp | 0Ch | ns | 8.1 | Disabled## 列出 event logs# [root@TL-QD-198 ~]# ipmitool -I lan -U root -E -H 192.168.1.101 sel list1 | 01/11/2011 | 11:40:54 | Temperature #0x0e | Upper Non-critical going high2 | 01/01/2011 | 12:32:41 | Temperature #0x0e | Upper Critical going high