Comlile and Install OpenVas 8 on Ubuntu Server 14.04
来源:互联网 发布:黑色沙漠战士捏脸数据 编辑:程序博客网 时间:2024/05/29 14:56
转自:https://www.mockel.se/index.php/2015/04/openvas-8-on-ubuntu-server-14-04/
After a question on the OpenVas7 howto, I tried to do an updated with OpenVas 8 and Ubuntu Server 14.04
- [2015-05-19]: Fixed som pebkap on my side..
- [2015-04-09]: Moved up openvas-smb config/compile to the beginning of the installation, after a suggestion from Malcolm in the comments
Like the last guides –
This installation is not made for public facing servers, there is no build in security in my setup.
Everything is run as root in this example below, including daemons and web servers…
I take no responsibility if this guide bork you server, burn your house down to ashes or just messes up your life.. It’s under the “it worked for me[tm]” clause
# Firstly install the build deps.
sudo apt-get install -y build-essential devscripts dpatch libassuan-dev \ libglib2.0-dev libgpgme11-dev libpcre3-dev libpth-dev libwrap0-dev libgmp-dev libgmp3-dev \ libgpgme11-dev libopenvas2 libpcre3-dev libpth-dev quilt cmake pkg-config \ libssh-dev libglib2.0-dev libpcap-dev libgpgme11-dev uuid-dev bison libksba-dev \ doxygen sqlfairy xmltoman sqlite3 libsqlite3-dev wamerican redis-server libhiredis-dev libsnmp-dev \ libmicrohttpd-dev libxml2-dev libxslt1-dev xsltproc libssh2-1-dev libldap2-dev autoconf nmap libgnutls-dev \libpopt-dev heimdal-dev heimdal-multidev libpopt-dev mingw32
# Fix redis-server for some openvas default install settings.
cp /etc/redis/redis.conf /etc/redis/redis.orig ;\echo "unixsocket /tmp/redis.sock" >> /etc/redis/redis.conf ;\service redis-server restart
# Move in to the right place to download some tarballs.
cd /usr/local/src
# Become almighty root (remember: safety off, segmented internal build on)
sudo su
# Download ‘all the things’
wget --no-check-certificate https://wald.intevation.org/frs/download.php/2015/openvas-libraries-8.0.1.tar.gz ;\wget --no-check-certificate https://wald.intevation.org/frs/download.php/2016/openvas-scanner-5.0.1.tar.gz ;\wget --no-check-certificate https://wald.intevation.org/frs/download.php/2017/openvas-manager-6.0.1.tar.gz ;\wget --no-check-certificate https://wald.intevation.org/frs/download.php/2018/greenbone-security-assistant-6.0.1.tar.gz ;\wget --no-check-certificate https://wald.intevation.org/frs/download.php/1987/openvas-cli-1.4.0.tar.gz ;\wget --no-check-certificate https://wald.intevation.org/frs/download.php/1975/openvas-smb-1.0.1.tar.gz ;\wget --no-check-certificate https://wald.intevation.org/frs/download.php/1999/ospd-1.0.0.tar.gz ;\wget --no-check-certificate https://wald.intevation.org/frs/download.php/2005/ospd-ancor-1.0.0.tar.gz ;\wget --no-check-certificate https://wald.intevation.org/frs/download.php/2003/ospd-ovaldi-1.0.0.tar.gz ;\wget --no-check-certificate https://wald.intevation.org/frs/download.php/2004/ospd-w3af-1.0.0.tar.gz
# unpack
find . -name \*.gz -exec tar zxvfp {} \;
# Configure and install openvas-smb:
cd openvas-smb* ;\ mkdir build ;\ cd build/ ;\ cmake .. ;\ make ;\ make doc-full ;\ make install ;\ cd /usr/local/src
# config and build libraries
cd openvas-libraries-* ;\ mkdir build ;\ cd build ;\ cmake .. ;\ make ;\ make doc-full ;\ make install ;\ cd /usr/local/src
# config and build scanner
cd openvas-scanner-* ;\ mkdir build ;\ cd build/ ;\ cmake .. ;\ make ;\ make doc-full ;\ make install ;\ cd /usr/local/src
# reload libraries
ldconfig
#create cert
openvas-mkcert
# Sync nvt’s
openvas-nvt-sync
# Start openvassd
openvassd
# Check with ps or htop if the daemon is started. or perhaps..
root@hostilehamster:/usr/local/src# watch "ps -ef | grep openvassd" root 32078 1 27 16:09 ? 00:00:36 openvassd: Reloaded 6550 of 34309 NVTs (19% / ETA: 09:10) root 32079 32078 0 16:09 ? 00:00:00 openvassd (Loading Handler)# Wait until "openvassd: Reloaded is done".. and switches to "Waiting for ingcoming..."
# config and build manager
cd openvas-manager-* ;\ mkdir build ;\ cd build/ ;\ cmake .. ;\ make ;\ make doc-full ;\ make install ;\ cd /usr/local/src
# get scap feed
openvas-scapdata-sync
# get cert feed
openvas-certdata-sync
# create client cert..
openvas-mkcert-client -n -i
# Initialize the Database
openvasmd --rebuild --progress (This is going to take some time, pehaps time to get coffee?)
#create user
openvasmd --create-user=admin --role=Admin (write down the password)
# config and build cli
cd openvas-cli-* ;\ mkdir build ;\ cd build/ ;\ cmake .. ;\ make ;\ make doc-full ;\ make install ;\ cd /usr/local/src
# configure and install gsa
cd greenbone-security-assistant-* ;\ mkdir build ;\ cd build/ ;\ cmake .. ;\ make ;\ make doc-full ;\ make install ;\ cd /usr/local/src
# Start the all the stuff.
openvasmd --rebuild --progress openvasmd gsad --http-only
# check installation
wget https://svn.wald.intevation.org/svn/openvas/trunk/tools/openvas-check-setup --no-check-certificate chmod 0755 openvas-check-setup ./openvas-check-setup --v8 --server
This should be a working default installation of OpenVas 8.
To try is out, go to http://serverip and login with Admin and your generated password.
# If you want to have pdf reports and such, you can always install:
apt-get install texlive-full(this is not optimal thou, this installs a bunch of packets..)
# And some autostart script for ubuntu 14.04. and OpenVas8
# Nothing fancy, I took the init.d scripts from the debs for OpenVas5 and changed some stuff to make it work in the above setup.
# So all credits goes to the creators of the scripts that are mentioned in the scripts comments..
# This below downloads my modded init.d, default, logrotate.d scripts
# Unpack the tarball, copy the thingies to etc/
# Create the symlink to /var/log/openvas
# Create the symlinks for the autostart jobs..
cd /usr/local/srcwget http://www.mockel.se/wp-content/uploads/2015/04/openvas-startupscripts-v8.tar.gztar zxvfp openvas-startupscripts-v8.tar.gzcd openvas-startupscripts-v8cp etc/* /etc/ -arviupdate-rc.d openvas-manager defaultsupdate-rc.d openvas-scanner defaultsupdate-rc.d greenbone-security-assistant defaults
If you have any questions, answers or anything else regarding this article..
Don’t hesitate to ask in the comments.
I plan to do a little howto install the ospd package also.. But that will be later
- Comlile and Install OpenVas 8 on Ubuntu Server 14.04
- OpenVas 8 on Ubuntu Server 14.04
- Install PostgreSql and PostGIS On Ubuntu Server
- mysql -server-5.6 install master and slave on ubuntu 14.04server
- Install and test nginx on Ubuntu 14.04
- CDH(hadoop) install on ubuntu 14.04server
- docker install on ubuntu 14.04 server
- Install Samba Server on Ubuntu
- How To Install and Use Memcache on Ubuntu 14.04
- Install And Configure Nagios on Ubuntu 14.04 LTS
- How To Install and Configure Elasticsearch on Ubuntu 14.04
- Install OpenVAS Vulnerability Scanner In Ubuntu 15.04
- How To Install VNC Server On Ubuntu 14.04
- How to install VNC server on ubuntu 14.04
- Install MariaDB Server 10.0 on Ubuntu 14.04 LTS ( Trusty Tahr )
- How To Install Node.js on an Ubuntu 14.04 server
- Install Ganglia on Ubuntu 14.04 Server (Trusty Tahr)
- zabbix-3.2 install-guide on ubuntu 14.04 server
- 给vc6对话框添加菜单
- synchronized锁住的是代码还是对象
- POI HSSF / XSSF主要局限
- 如何将PDF文件转换成为JPG图片
- 高德地图百度地图导航坐标转换
- Comlile and Install OpenVas 8 on Ubuntu Server 14.04
- Softmax vs. Softmax-Loss: Numerical Stability
- PHP 学习任务书(一):搭建开发环境
- hashmap entry
- Spring Security4.1.3实现拦截登录后向登录页面跳转方式(redirect或forward)返回被拦截界面
- iOS Swift下dispatch_after的写法
- this指针与构造函数
- php 第一次创建文件时延迟4秒 sleep用法
- iPad开发2(高仿之路)