poj 1861 Network 解题报告
来源:互联网 发布:qq游戏大厅mac 编辑:程序博客网 时间:2024/04/29 09:26
Network
Time Limit: 1000MS Memory Limit: 30000KTotal Submissions: 16171 Accepted: 6417 Special Judge
Description
Andrew is working as system administrator and is planning to establish a new network in his company. There will be N hubs in the company, they can be connected to each other using cables. Since each worker of the company must have access to the whole network, each hub must be accessible by cables from any other hub (with possibly some intermediate hubs).
Since cables of different types are available and shorter ones are cheaper, it is necessary to make such a plan of hub connection, that the maximum length of a single cable is minimal. There is another problem — not each hub can be connected to any other one because of compatibility problems and building geometry limitations. Of course, Andrew will provide you all necessary information about possible hub connections.
You are to help Andrew to find the way to connect hubs so that all above conditions are satisfied.
Since cables of different types are available and shorter ones are cheaper, it is necessary to make such a plan of hub connection, that the maximum length of a single cable is minimal. There is another problem — not each hub can be connected to any other one because of compatibility problems and building geometry limitations. Of course, Andrew will provide you all necessary information about possible hub connections.
You are to help Andrew to find the way to connect hubs so that all above conditions are satisfied.
Input
The first line of the input contains two integer numbers: N - the number of hubs in the network (2 <= N <= 1000) and M - the number of possible hub connections (1 <= M <= 15000). All hubs are numbered from 1 to N. The following M lines contain information about possible connections - the numbers of two hubs, which can be connected and the cable length required to connect them. Length is a positive integer number that does not exceed 106. There will be no more than one way to connect two hubs. A hub cannot be connected to itself. There will always be at least one way to connect all hubs.
Output
Output first the maximum length of a single cable in your hub connection plan (the value you should minimize). Then output your plan: first output P - the number of cables used, then output P pairs of integer numbers - numbers of hubs connected by the corresponding cable. Separate numbers by spaces and/or line breaks.
Sample Input
4 61 2 11 3 11 4 22 3 13 4 12 4 1
Sample Output
141 21 32 33 4
Source
Northeastern Europe 2001, Northern Subregion
[Submit] [Go Back] [Status] [Discuss]
Home Page Go Back To top
————————————————我是分割线————————————————
最小生成树。
一开始没看到Special judge
发现与样例输出不同,以为自己错了,改了很长时间
最后受不了了强交一波 结果过了 TAT
一口毒奶喷了出来..........................
仔细读题果然必要,即使是题目的题目。
话说为什么这么多题都叫network。。。
1 /* 2 Problem: 3 OJ: 4 User: 5 Time: 6 Memory: 7 Length: 8 */ 9 #include<iostream> 10 #include<cstdio> 11 #include<cstring> 12 #include<cmath> 13 #include<algorithm> 14 #include<queue> 15 #include<cstdlib> 16 #include<iomanip> 17 #include<cassert> 18 #include<climits> 19 #include<vector> 20 #include<list> 21 #include<map> 22 #define maxn 15001 23 #define F(i,j,k) for(int i=j;i<=k;i++) 24 #define M(a,b) memset(a,b,sizeof(a)) 25 #define FF(i,j,k) for(int i=j;i>=k;i--) 26 #define inf 0x7fffffff 27 #define maxm 2016 28 #define mod 1000000007 29 //#define LOCAL 30 using namespace std; 31 int read(){ 32 int x=0,f=1;char ch=getchar(); 33 while(ch<'0'||ch>'9'){if(ch=='-')f=-1;ch=getchar();} 34 while(ch>='0'&&ch<='9'){x=x*10+ch-'0';ch=getchar();} 35 return x*f; 36 } 37 int n,m; 38 struct EDGE 39 { 40 int from; 41 int to; 42 int value; 43 }e[maxn]; 44 int fa[maxn]; 45 int ans[maxn],cnt; 46 int num,maxedge; 47 inline void init() 48 { 49 for(int i=1;i<=n;i++) fa[i]=-1; 50 } 51 inline int find(int u) 52 { 53 int i; 54 for(i=u;fa[i]>=0;i=fa[i]); 55 while(i!=u){//路径压缩 56 int temp=fa[u]; 57 fa[u]=i; 58 u=temp; 59 } 60 return i; 61 } 62 inline void Union(int a,int b) 63 { 64 int aa=find(a),bb=find(b); 65 int temp=fa[aa]+fa[bb]; 66 if(fa[aa]>fa[bb])//按秩合并 67 { 68 fa[aa]=bb; 69 fa[bb]=temp; 70 } 71 else{ 72 fa[bb]=aa; 73 fa[aa]=temp; 74 } 75 } 76 int comp(const void *a,const void *b) 77 { 78 EDGE aa=*(const EDGE *)a; 79 EDGE bb=*(const EDGE *)b; 80 return aa.value-bb.value; 81 } 82 int cmp(EDGE a,EDGE b) 83 { 84 return a.value<b.value; 85 } 86 inline void kruskal() 87 { 88 cnt=0; 89 int u,v; 90 init(); 91 for(int i=0;i<m;i++) 92 { 93 u=e[i].from;v=e[i].to; 94 if(find(u)!=find(v)) 95 { 96 ans[cnt]=i;cnt++; 97 if(e[i].value>maxedge) 98 maxedge=e[i].value; 99 num++;100 Union(u,v); 101 }102 if(num>=n-1) break;103 }104 } 105 int main()106 {107 std::ios::sync_with_stdio(false);//cout<<setiosflags(ios::fixed)<<setprecision(1)<<y;108 #ifdef LOCAL109 freopen("data.in","r",stdin);110 freopen("data.out","w",stdout);111 #endif112 while(cin>>n>>m)113 {114 for(int i=0;i<m;i++) cin>>e[i].from>>e[i].to>>e[i].value;115 sort(e,e+m,cmp);116 // qsort(e,m,sizeof(e[0]),comp);117 maxedge=0;num=0;118 kruskal();119 cout<<maxedge<<endl;120 cout<<num<<endl;121 for(int i=0;i<num;i++) cout<<e[ans[i]].from<<" "<<e[ans[i]].to<<endl;122 }123 return 0;124 }
0 0
- POJ-1861-Network 解题报告
- poj 1861 Network 解题报告
- POJ-1861-NETWORK 解题报告
- POJ-2531 Network Saboteur 解题报告
- POJ 2531 Network Saboteur(DFS & 随机化)解题报告
- 【Jason's_ACM_解题报告】Network
- poj数百篇解题报告
- poj 1141解题报告
- poj 1001解题报告
- poj 1011 解题报告
- poj 1087 解题报告
- poj 2153解题报告
- poj 2051解题报告
- POJ 1167 解题报告
- poj 1026 解题报告
- POJ 1077 解题报告
- POJ 1042 解题报告
- POJ 1095 解题报告
- poj 2284 That Nice Euler Circuit 解题报告
- 用于部署war并重启Tomcat的脚本
- poj 2585 Window Pains 解题报告
- JSP技术详解
- ListView详解
- poj 1861 Network 解题报告
- cocos2d-x 3.7 C++接入GameCenter 使用socket 进行网络数据请求
- 给计算机相关专业在校大学生和刚工作的一封信
- bzoj 1565 [NOI2009]植物大战僵尸 解题报告
- extern "C"用法 - 笔试题
- 数字电视的分类
- 学习笔记:欧拉函数
- 对话框(第三方) dialogPlus
- 内核态和用户态的区别