centos7 lamp+nginx搭建(附自动安装脚本)
来源:互联网 发布:32java玩mc很卡 编辑:程序博客网 时间:2024/06/07 10:07
查询 ip信息 ip addr
重启网络服务 systemctl restart network network.server
设置防火墙开放22端口 firewall-cmd –zone=public –add-port=22/tcp –permanent
重启防火墙 systemctl retart firewalld.service
首先我们先安装php;
linux安装 php
下载php:wget http://cn2.php.net/get/php-7.0.11.tar.gz/from/this/mirror
解压:tar -zxvf mirror
安装gcc:yum install gcc gcc+ libxml2-devel
编译:./configure –prefix=/usr/local/php7 –enable-fpm
make
sudo make install
执行1.php文件 /usr/local/php7/bin/php 1.php,
CGI,FAST-CGI,enable=fpm这三点不是很了解;1. PHP 解释器是否嵌入 Web 服务器进程内部执行mod_php 通过嵌入 PHP 解释器到 Apache 进程中,只能与 Apache 配合使用,而 cgi 和 fast-cgi 以独立的进程的形式出现,只要对应的Web服务器实现 cgi 或者 fast-cgi 协议,就能够处理 PHP 请求。mod_php 这种嵌入的方式最大的弊端就是内存占用大,不论是否用到 PHP 解释器都会将其加载到内存中,典型的就是处理CSS、JS之类的静态文件是完全没有必要加载解释器。2. 单个进程处理的请求数量mod_php 和 fast-cgi 的模式在每个进程的生命周期内能够处理多个请求,而 cgi 的模式处理一个请求就马上销毁进程,在高并发的场景下 cgi 的性能非常糟糕。 综上,如果对性能有极高的要求,可以将静态请求和动态请求分开,这时 Nginx + php-fpm 是比较好的选择。PS: cgi、fastcgi 通常指 Web 服务器与解释器通信的协议规范,而 php-fpm 是 fastcgi 协议的一个实现。
然后安装mysql;
wget http://dev.mysql.com/get/Downloads/MySQL-5.7/mysql-5.7.15.tar.gz 下载
tar -zxvf mysql-5.7.15.tar.gz 解压
yum install cmake gcc-c++ ncurses-devel perl-Data-Dumper boost boost-doc boost-devel 安装依赖
然后进入mysql目录,用cmake进行安装;
这时,遇到一个问题;
报错:cmake -DCMAKE_STALL_PREFIX=/usr/local/mysql -DMYSQL_DATADIR=/home/mysql/data -DSYSCONFDIR=/etc -DMYSQL_USER=mysql -DWITH_MYISAM_STORAGE_ENGINE=1 -DWITH_INNOBASE_STORAGE_ENGINE=1 -DWITH_ARCHIVE_STORAGE_ENGINE=1 -DWITH_BLACKHOLE_STORAGE_ENGINE=1 -DWITH_MEMORY_STORAGE_ENGINE=1 -DWITH_READLINE=1 -DMYSQL_UNIX_ADDR=/usr/local/mysql/mysql.sock -DMYSQL_TCP_PORT=3306 -DENABLED_LOCAL_INFILE=1 -DENABLED_DOWNLOADS=1 -DWITH_PARTITION_STORAGE_ENGINE=1 -DEXTRA_CHARSETS=all -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci -DWITH_DEBUG=0 -DMYSQL_MAINTAINER_MODE=0 -DWITH_SSL:STRING=bundled -DWITH_ZLIB:STRING=bundled -DDOWNLOAD_BOOST=1
原因分析:没有boost包
解决方法:
1、在预编译时添加相应的选项:cmake . -DDOWNLOAD_BOOST=1 -DWITH_BOOST=/usr/local/boost
[root@kongxl mysql-5.7.6-m16]# cmake . -DCMAKE_INSTALL_PREFIX=/usr/local/mysql -DMYSQL_DATADIR=/data/mysql -DWITH_INNOBASE_STORAGE_ENGINE=1 -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci -DDOWNLOAD_BOOST=1 -DWITH_BOOST=/usr/local/boost
2、或者下载一个boost包,放到/usr/local/boost目录下,然后在cmake后面加选项-DWITH_BOOST=/usr/local/boost
[root@kongxl mysql-5.7.6-m16]# cmake . -DCMAKE_INSTALL_PREFIX=/usr/local/mysql -DMYSQL_DATADIR=/data/mysql -DWITH_INNOBASE_STORAGE_ENGINE=1 -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci -DWITH_BOOST=/usr/local/boost
-DCMAKE_INSTALL_PREFIX=/usr/local/mysql \ #安装路径-DMYSQL_DATADIR=/usr/local/mysql/data \ #数据文件存放位置-DSYSCONFDIR=/etc \ #my.cnf路径-DWITH_MYISAM_STORAGE_ENGINE=1 \ #支持MyIASM引擎-DWITH_INNOBASE_STORAGE_ENGINE=1 \ #支持InnoDB引擎-DWITH_MEMORY_STORAGE_ENGINE=1 \ #支持Memory引擎-DWITH_READLINE=1 \ #快捷键功能(我没用过)-DMYSQL_UNIX_ADDR=/tmp/mysqld.sock \ #连接数据库socket路径-DMYSQL_TCP_PORT=3306 \ #端口-DENABLED_LOCAL_INFILE=1 \ #允许从本地导入数据-DWITH_PARTITION_STORAGE_ENGINE=1 \ #安装支持数据库分区-DEXTRA_CHARSETS=all \ #安装所有的字符集-DDEFAULT_CHARSET=utf8 \ #默认字符-DDEFAULT_COLLATION=utf8_general_ci
boost包地址http://sourceforge.net/projects/boost/files/boost/1.59.0/boost_1_59_0.tar.gz
用tar 解压 tar.bz2文件出错 debian:/usr/src# tar jxf linux-2.6.26.tar.bz2 tar:
bzip2: Cannot exec: No such file or directory tar: Error is not
recoverable: exiting now tar: Child returned status 2 tar: Error exit
delayed from previous errors 解决办法 安装bzip2软件包 apt-get install bzip2
下面,我们来安装apache服务;
[root@bogon httpd-2.4.23]# wget https://mirrors.tuna.tsinghua.edu.cn/apache/httpd/httpd-2.4.23.tar.gz解压[root@bogon httpd-2.4.23]# ./configure --prefix=/usr/local/apache2checking for chosen layout... Apachechecking for working mkdir -p... yeschecking for grep that handles long lines and -e... /usr/bin/grepchecking for egrep... /usr/bin/grep -Echecking build system type... x86_64-unknown-linux-gnuchecking host system type... x86_64-unknown-linux-gnuchecking target system type... x86_64-unknown-linux-gnuconfigure: configure: Configuring Apache Portable Runtime library...configure: checking for APR... noconfigure: error: APR not found. Please read the documentation.报错,安装APR http://apr.apache.org/download.cgi[root@bogon null]# wget http://mirrors.cnnic.cn/apache//apr/apr-1.5.2.tar.gz[root@bogon null]# wget http://mirrors.cnnic.cn/apache//apr/apr-util-1.5.4.tar.gz解压,mv重命名[root@bogon null]# mv apr-1.5.2 apr[root@bogon null]# mv apr-util-1.5.4 apr-util[root@bogon null]# mv apr apr-util httpd-2.4.23/srclib/然后安装pcre的依赖包https://sourceforge.net/projects/pcre/files/pcre/8.39/[root@bogon null]# cd pcre-8.39/[root@bogon pcre-8.39]# ./configure --prefix=/usr/local/pcre-8.39 make make install[root@bogon httpd-2.4.23]# ./configure --prefix=/usr/local/apache -with-pcre=/usr/local/pcre-8.39/bin/pcre-config -with-included-apr make make install[root@bogon httpd-2.4.23]# cd /usr/local/apache/bin/[root@bogon bin]# ./apachetcl -k start-bash: ./apachetcl: 没有那个文件或目录[root@bogon bin]# ./apachectl -k startAH00557: httpd: apr_sockaddr_info_get() failed for bogonAH00558: httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message
firewall-cmd –zone=public –add-port=80/tcp –permanent
systemctl retart firewalld.service
#!/bin/bashPATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/binexport PATH#INFO函数定义输出字体颜色,echo -e 表示保持字符串的特殊含义,$1表示字体颜色编号,$2表示等待程序执行时间,$3表示echo输出内容。function INFO(){ echo -e "\e[$1;49;1m: $3 \033[39;49;0m" sleep "$2" echo ""}#非root用户不能执行该脚本if [ "$UID" != 0 ]; then echo " " INFO 35 "0" "Must be root ro run this script." exit 1fi#USAGE函数定义脚本用法,可反复调用,basename其实就是脚本名,\n表示换行。function USAGE(){ INFO 35 "0.1" "Please see the script of the usage:" basename=$(basename "$0") INFO \ 36 "0" \ "$(echo -e "Usage: \n\n./$basename (apache|mysql|php) install \n./$basename apache (start|stop|restart) \n./$basename mysql (start|stop|restart)\n")"}#YUM_INSTALL函数安装依赖包,可反复调用,$@表示所有参数都分别被双引号引住"$1","$2",而$*表示所有这些参数都被双引号引住"$1$2"function YUM_INSTALL(){ for a in $@; do INFO 32 1 "Install depend on the [ $a ]" yum -y install $a || exit 1 if [ $a = "libXpm-devel" ]; then ln -s /usr/lib/x86_64-linux-gnu/libXpm.so /usr/lib/libXpm.so #elif [ $a = "libsasl2-dev" ]; then # cp /usr/lib/x86_64-linux-gnu/libldap* /usr/lib/ fi done}#INSTALL函数定义安装程序,可一反复调用,安装apache程序的时候要先安装3个依赖包,在安装mysql的时候要用cmake编译。$1表示要安装的程序,$2表示yum安装对应的依赖包,$3表示程序解压后的目录,$4表示程序源码包。function INSTALL(){ YUM_INSTALL "$2" && cd $SOURCE_PATH [ -d $3 ] && rm -r $3; INFO 31 4 "Unpack the $4 installation package......" tar zxvf $4; cd $3 ; pwd ; INFO 32 4 "Configure the $1......" if [ $1 = apache ]; then cp -rf ../apr-1.4.8 srclib/apr cp -rf ../apr-util-1.5.2 srclib/apr-util ./configure $5 || exit 1 elif [ $1 = mysql ]; then cmake $5 || exit 1 elif [ $1 = openssl ]; then ./config $5 || exit 1 elif [ $1 = libpng ]; then cp scripts/makefile.linux makefile elif [ $1 = jpegsrc.v6b.tar.gz ]; then cp /usr/share/libtool/config.guess ./ cp /usr/share/libtool/config.sub ./ ./configure $5 || exit 1 mkdir -p /usr/local/env/jpeg/bin mkdir -p /usr/local/env/jpeg/lib mkdir -p /usr/local/env/jpeg/include mkdir -p /usr/local/env/jpeg/man/man1 else ./configure $5 || exit 1 fi INFO 36 3 "Compile $1......" make || exit 1 && INFO 34 4 "Install $1......" ; make install && INFO 33 4 "$1 installation is successful......" if [ $1 = mysql ]; then echo $INSTALL_PATH/mysql/lib/mysql >> /etc/ld.so.conf /sbin/ldconfig && INFO 33 4 "Add $1 library file to ld.so.conf......" fi if [ $1 = libiconv ]; then echo "/usr/local/env/libiconv/lib" >> /etc/ld.so.conf /sbin/ldconfig && INFO 33 4 "Add $1 library file to ld.so.conf......" fi if [ $1 = libxml2 ]; then echo "/usr/local/env/libxml2/lib" >> /etc/ld.so.conf /sbin/ldconfig && INFO 33 4 "Add $1 library file to ld.so.conf......" fi if [ $1 = libmcrypt ]; then echo "/usr/local/env/libmcrypt/lib" >> /etc/ld.so.conf /sbin/ldconfig && INFO 33 4 "Add $1 library file to ld.so.conf......" fi if [ $1 = mhash ]; then echo "/usr/local/lib" >> /etc/ld.so.conf echo "/usr/local/lib64" >> /etc/ld.so.conf /sbin/ldconfig && INFO 33 4 "Add $1 library file to ld.so.conf......" fi if [ $1 = gettext ]; then echo "/usr/local/env/gettext/lib" >> /etc/ld.so.conf /sbin/ldconfig && INFO 33 4 "Add $1 library file to ld.so.conf......" fi if [ $1 = gd ]; then sed -i '27 a void (*data);' /usr/local/env/gd/include/gd_io.h echo "/usr/local/env/gd/lib" >> /etc/ld.so.conf /sbin/ldconfig && INFO 33 4 "Add $1 library file to ld.so.conf......" fi if [ $1 = freetype ]; then echo "/usr/local/env/freetype/lib" >> /etc/ld.so.conf /sbin/ldconfig && INFO 33 4 "Add $1 library file to ld.so.conf......" fi if [ $1 = jpegsrc.v6b.tar.gz ]; then echo "/usr/local/env/jpeg/lib" >> /etc/ld.so.conf /sbin/ldconfig && INFO 33 4 "Add jpeg library file to ld.so.conf......" fi}#SERVICE函数定义程序启动,关闭,重启。function SERVICE(){ if [ $1 = apache -a $2 = start ]; then $INSTALL_PATH/$1/bin/apachectl -k start && \ INFO 33 "2.5" "Apache startup success......" exit elif [ $1 = apache -a $2 = stop ]; then $INSTALL_PATH/$1/bin/apachectl -k stop && \ INFO 31 "2.5" "Apache has stopped......" exit elif [ $1 = apache -a $2 = restart ]; then $INSTALL_PATH/$1/bin/apachectl -k stop ; sleep 2 INFO 31 "2.5" "Apache has stopped......" $INSTALL_PATH/$1/bin/apachectl -k start && \ INFO 34 "2.5" "Apache has restarted......" exit elif [ $1 = mysql -a $2 = start ]; then /bin/bash $INSTALL_PATH/$1/bin/mysqld_safe --defaults-file=$INSTALL_PATH/$1/my.cnf 2>&1 > /dev/null & INFO 33 "2.5" "Mysql startup success......" echo -e "$(netstat -ntpl|grep "/:::3306")" exit elif [ $1 = mysql -a $2 = stop ]; then kill $(netstat -ntpl|awk '/:::3306/{print $NF}'|awk -F '/' '{print $1}') && \ INFO 31 "2.5" "Mysql has stopped......" exit elif [ $1 = mysql -a $2 = restart ]; then kill $(netstat -ntpl|awk '/:::3306/{print $NF}'|awk -F '/' '{print $1}') && \ INFO 31 "3" "Mysql has stopped......" /bin/bash $INSTALL_PATH/$1/bin/mysqld_safe --defaults-file=$INSTALL_PATH/$1/my.cnf 2>&1 > /dev/null & INFO 34 "2.5" "Mysql has restarted......" exit fi}#CONFIG_MYSQL函数用来定义mysql的配置。function CONFIG_MYSQL(){ INFO 32 3 "Configure the mysql......" groups mysql || groupadd mysql && id mysql || useradd -g mysql mysql cd $INSTALL_PATH/mysql ; pwd ./scripts/mysql_install_db \ --user=mysql \ --basedir=$INSTALL_PATH/mysql/ \ --datadir=$INSTALL_PATH/mysql/data/ \ --defaults-file=$INSTALL_PATH/mysql/my.cnf echo ""; sleep 3 cp $(dirname $SOURCE_PATH)/conf/my.cnf ./ INFO 35 2 "Mysql configuration is complete......"}#CONFIG_HTTPD函数用来配置apache。function CONFIG_HTTPD(){ INFO 32 3 "Configure the apache......" echo -e "<?php\nphpinfo();\n?>" > $INSTALL_PATH/apache/htdocs/phpinfo.php sed -i 's/^\ \ \ \ AddType application\/x-gzip .gz .tgz$/&\n\ \ \ \ AddType application\/x-httpd-php .php/' \ $INSTALL_PATH/apache/conf/httpd.conf sed -i 's/^#ServerName www.example.com:80$/&\nServerName 127.0.0.1:80/' $INSTALL_PATH/apache/conf/httpd.conf INFO 35 2 "Apache configuration is complete......"}#CONFIG_PHP函数用来配置php。function CONFIG_PHP(){ INFO 32 3 "Configure the php......" cp $SOURCE_PATH/$1/php.ini-development $INSTALL_PATH/php5/etc/php.ini INFO 35 2 "Php configuration is complete......"}#INSTALL_BRANCH函数定义程序安装,${TAR_NAME[@]}是shell脚本中数组写法,即取全部元素,即TAR_NAME里面的所有包,SERVER_NAME表示包的名称,COMPILE_DIR表示包名+版本后,即解压后的目录名。function INSTALL_BRANCH(){ for i in ${TAR_NAME[@]}; do SERVER_NAME=$(echo $i|awk -F "-[0-9]" '{print $1}') COMPILE_DIR=$(echo $i|awk -F ".tar.gz" '{print $1}') if [ $1 = $SERVER_NAME -a $1 = apr ]; then INSTALL apr " " "$COMPILE_DIR" "$i" "--prefix=/usr/local/env/apr" elif [ $1 = $SERVER_NAME -a $1 = apr-util ];then INSTALL apr-util " " "$COMPILE_DIR" "$i" "--prefix=/usr/local/env/apr-util --with-apr=/usr/local/env/apr" elif [ $1 = $SERVER_NAME -a $1 = pcre ]; then INSTALL pcre " " "$COMPILE_DIR" "$i" "--prefix=/usr/local/env/pcre" elif [ $1 = $SERVER_NAME -a $1 = httpd ]; then INSTALL apache "$HTTP_YUM" "$COMPILE_DIR" "$i" "$HTTP_PARAMETERS" CONFIG_HTTPD elif [ $1 = $SERVER_NAME -a $1 = mysql ]; then INSTALL mysql "$MYSQL_YUM" "$COMPILE_DIR" "$i" "$MYSQL_PARAMETERS" CONFIG_MYSQL elif [ $1 = $SERVER_NAME -a $1 = libiconv ]; then INSTALL libiconv " " "$COMPILE_DIR" "$i" "--prefix=/usr/local/env/libiconv" elif [ $1 = $SERVER_NAME -a $1 = libxml2 ]; then INSTALL libxml2 " " "$COMPILE_DIR" "$i" "--prefix=/usr/local/env/libxml2 --with-iconv=/usr/local/env/libiconv" elif [ $1 = $SERVER_NAME -a $1 = curl ]; then INSTALL curl " " "$COMPILE_DIR" "$i" "--prefix=/usr/local/env/curl --enable-utf8" elif [ $1 = $SERVER_NAME -a $1 = libmcrypt ]; then INSTALL libmcrypt " " "$COMPILE_DIR" "$i" "--prefix=/usr/local/env/libmcrypt" elif [ $1 = $SERVER_NAME -a $1 = mhash ]; then INSTALL mhash " " "$COMPILE_DIR" "$i" " " elif [ $1 = $SERVER_NAME -a $1 = mcrypt ]; then INSTALL mcrypt " " "$COMPILE_DIR" "$i" "--prefix=/usr/local/env/mcrypt \ --with-libmcrypt-prefix=/usr/local/env/libmcrypt \ --with-libiconv-prefix=/usr/local/env/libiconv" elif [ $1 = $SERVER_NAME -a $1 = gettext ]; then INSTALL gettext " " "$COMPILE_DIR" "$i" "--prefix=/usr/local/env/gettext \ --with-libiconv-prefix=/usr/local/env/libiconv \ --with-libxml2-prefix=/usr/local/env/libxml2" elif [ $1 = $SERVER_NAME -a $1 = freetype ]; then INSTALL freetype " " "$COMPILE_DIR" "$i" "--prefix=/usr/local/env/freetype" elif [ $1 = $SERVER_NAME -a $1 = jpegsrc.v6b.tar.gz ]; then COMPILE_DIR="jpeg-6b" INSTALL jpegsrc.v6b.tar.gz " " "$COMPILE_DIR" "$i" "--prefix=/usr/local/env/jpeg --enable-shared --enable-static" elif [ $1 = $SERVER_NAME -a $1 = libpng ]; then INSTALL libpng " " "$COMPILE_DIR" "$i" " " elif [ $1 = $SERVER_NAME -a $1 = gd ]; then INSTALL gd " " "$COMPILE_DIR" "$i" "--prefix=/usr/local/env/gd --with-png=/usr \ --with-freetype=/usr/local/env/freetype \ --with-jpeg=/usr/local/env/jpeg --with-fontconfig=/usr --with-xpm=/usr" elif [ $1 = $SERVER_NAME -a $1 = openssl ]; then INSTALL openssl " " "$COMPILE_DIR" "$i" "-fPIC --prefix=/usr/local/env/openssl shared" elif [ $1 = $SERVER_NAME -a $1 = php ]; then INSTALL php5 "$PHP5_YUM" "$COMPILE_DIR" "$i" "$PHP5_PARAMETERS" CONFIG_PHP "$COMPILE_DIR" break else continue fi done}#MOD_CASE函数用KASE定义选择安装程序。function MOD_CASE(){ if [[ $1 =~ apache|mysql|php ]] && [[ $2 =~ install|start|stop|restart ]]; then INFO 32 "1.5" "Input the correct,according to the option to perform related operations......" echo "" if [ $2 = install ]; then case "$1 $2" in "apache install") INFO 35 "2.5" "Start to $1 the $2......" INSTALL_BRANCH apr INSTALL_BRANCH apr-util INSTALL_BRANCH pcre INSTALL_BRANCH httpd ;; "mysql install") INFO 35 "2.5" "Start to $1 the $2......" INSTALL_BRANCH mysql ;; "php install") INFO 35 "2.5" "Start to $1 the $2......" export LD_LIBRARY_PATH=/lib/:/usr/lib/:/usr/local/lib:/usr/local/lamp/mysql/lib INSTALL_BRANCH libiconv INSTALL_BRANCH libxml2 INSTALL_BRANCH curl INSTALL_BRANCH libmcrypt INSTALL_BRANCH mhash INSTALL_BRANCH mcrypt INSTALL_BRANCH gettext INSTALL_BRANCH freetype INSTALL_BRANCH jpegsrc.v6b.tar.gz INSTALL_BRANCH libpng INSTALL_BRANCH gd INSTALL_BRANCH openssl #INSTALL_BRANCH httpd && INSTALL_BRANCH mysql && INSTALL_BRANCH php INSTALL_BRANCH php ;; esac else SERVICE $1 $2 fi else INFO 31 1 "Input error, please try again!" INPUT fi}#LAMP程序安装的目录INSTALL_PATH="/usr/local/lamp"#源码包存放目录SOURCE_PATH="$(cd $(dirname $0); pwd)/install_tar"#源码包列表TAR_NAME=(httpd-2.4.4.tar.gz mysql-5.6.12.tar.gz php-5.4.17.tar.gz apr-1.4.8.tar.gz apr-util-1.5.2.tar.gz pcre-8.10.tar.gz freetype-2.4.0.tar.gz jpegsrc.v6b.tar.gz libxml2-2.7.2.tar.gz mhash-0.9.9.9.tar.gz mcrypt-2.6.8.tar.gz gd-2.0.35.tar.gz libiconv-1.14.tar.gz gettext-0.18.tar.gz libmcrypt-2.5.8.tar.gz openssl-0.9.8p.tar.gz curl-7.32.0.tar.gz libpng-1.2.33.tar.gz)#Apache,Mysql,PHP yum安装依赖包HTTP_YUM="build-essential libapr1 libapr1-dev libaprutil1 libaprutil1-dev gettext gettext-devel"MYSQL_YUM="cmake libncurses5 libncurses5-dev bison"PHP5_YUM="libxml2 libxml2-devel openssl libjpeg-devel bzip2 libXpm-devel libmcrypt-devel"#Apache编译参数HTTP_PARAMETERS="\--prefix=$INSTALL_PATH/apache \--enable-module=so \--enable-module=rewrite \--enable-shard=rewrite \--enable-shared=max \--with-apr=/usr/local/env/apr \--with-apr-util=/usr/local/env/apr-util \--with-pcre=/usr/local/env/pcre \--with-included-apr \"#mysql编译参数MYSQL_PARAMETERS="\-DCMAKE_INSTALL_PREFIX=$INSTALL_PATH/mysql \-DYSQL_TCP_PORT=3306 \-DMYSQL_DATADIR=$INSTALL_PATH/mysql/data \-DMYSQL_UNIX_ADDR=$INSTALL_PAHT/mysql/mysql.sock \-DWITH_MYISAM_STORAGE_ENGINE=1 \-DWITH_INNOBASE_STORAGE_ENGINE=1 \-DDEFAULT_CHARSET=utf8 \-DDEFAULT_COLLATION=utf8_general_ci \-DEXTRA_CHARSETS=all \-DWITH_DEBUG=0 \"#PHP编译参数PHP5_PARAMETERS="\--prefix=$INSTALL_PATH/php5 \--with-config-file-path=$INSTALL_PATH/php5/etc \--with-mysql=$INSTALL_PATH/mysql \--with-apxs2=$INSTALL_PATH/apache/bin/apxs \--with-mysqli=$INSTALL_PATH/mysql/bin/mysql_config \--with-iconv=/usr/local/env/libiconv \--with-jpeg-dir=/usr/local/env/jpeg \--with-png-dir=/usr \--with-libxml-dir=/usr/local/env/libxml2 \--with-pdo-mysql \--with-zlib \--with-curl=/usr/local/env/curl \--with-curlwrappers \--with-mcrypt=/usr/local/env/libmcrypt \--with-gd=/usr/local/env/gd \--with-openssl=/usr/local/env/openssl \--with-mhash=/usr \--with-xmlrpc \--with-xpm-dir \--with-freetype-dir=/usr/local/env/freetype \--with-zlib-dir \--with-ldap \--with-ldap-sasl \--with-pcre-regex \--with-gettext=/usr/local/env/gettext \--with-ncurses \--enable-shared \--enable-xml \--enable-safe-mode \--enable-track-vars \--enable-magic-quotes \--enable-bcmath \--enable-sysvsem \--enable-sysshm \--enable-inline-optimization \--enable-mbregex \--enable-mbstring \--enable-gd-native-ttf \--enable-pcntl \--enable-sockets \--enable-zip \--enable-soap \--enable-discard-path \--enable-force-cgi-redirect \--enable-pdo \--enable-calendar \--enable-exif \--enable-zend-multibyte \"#--disable-rpath#脚本调用帮助程序if [ $# = 2 ] then INFO 33 "1.5" "please wait......" echo "" MOD_CASE "$1" "$2" else USAGE exit 1fi
- centos7 lamp+nginx搭建(附自动安装脚本)
- Centos7最小化安装搭建LAMP服务器
- CentOS7最小化安装后搭建LAMP环境
- centos7 k8s自动安装脚本
- centos7下搭建lamp
- CentOS7搭建lamp
- Centos7 LAMP环境搭建
- Centos7搭建lamp环境
- CentOS7 搭建 LAMP环境
- centos7搭建lamp环境
- centos7 aliyun搭建LAMP
- Centos7 Lamp环境搭建
- centOs7.2 lamp搭建
- CentOS7 搭建LAMP环境
- CentOS7 LAMP环境搭建
- CentOS7搭建LAMP环境
- Centos7 搭建LAMP 环境
- centos7搭建lnmp编译安装nginx【二】
- java开始与结束日期遍历
- 依赖加解密的一段算法-从ZeroRootkit逆得
- 一级指针简单理解
- Ubuntu16.04下编译OpenCV
- 机器学习简史
- centos7 lamp+nginx搭建(附自动安装脚本)
- jsp内置对象:page属性范围
- Swift基本运算符和简单的逻辑运算符
- POJ1065 Wooden Sticks(Greedy)
- ListView增强组件QuickScroll
- POJ1631 Bridging signals(最大上升子序列)
- VMware Tools的安装无法手动启动,自动安装正在进行中。 的解决方案!
- 读书笔记:C++ primer 5th edition--chapter13.拷贝控制
- 计算机视觉——DoG和LoG算子