整理的关于Java参数传递的研究

    Javaeye论坛看到这么一个帖子，是关于老生常谈的java参数传递到底是传引用还是传值的，讨论的比较透彻原帖地址在
http://www.javaeye.com/topic/4189?page=1。
    各种观点，众说纷纭，又对有错（个人观点），这里整理一下。
    先说我的观点：
    其实传值和传引用，都是个说法问题，《Practical Java》一书将的第一个实践便是这个，书中说的很清晰透彻，作者认为java中所有的参数传递都是值传递，方法所修改的都是参数的副本，当为基本类型（primitive types）是，就是该值的副本，当为对象（object）时，则为该对象引用（object reference）的副本。
    《core java》第一卷Chapter 4有专门的一章《Method Parameters》更翔实的解释了这个问题，这里直接引用原文了：
“

Method Parameters

Let us review the computer science terms that describe how parameters can be passed to a method (or a function) in a programming language. The term call by value means that the method gets just the value that the caller provides. In contrast, call by reference means that the method gets the location of the variable that the caller provides. Thus, a method can modify the value stored in a variable that is passed by reference but not in one that is passed by value. These "call by . . . " terms are standard computer science terminology that describe the behavior of method parameters in various programming languages, not just Java. (In fact, there is also a call by name that is mainly of historical interest, being employed in the Algol programming language, one of the oldest high-level languages.)

The Java programming language always uses call by value. That means that the method gets a copy of all parameter values. In particular, the method cannot modify the contents of any parameter variables that are passed to it.

For example, consider the following call:

double percent = 10;
harry.raiseSalary(percent);

No matter how the method is implemented, we know that after the method call, the value of percent is still 10.

Let us look a little more closely at this situation. Suppose a method tried to triple the value of a method parameter:

public static void tripleValue(double x) // doesn't work
{
   x = 3 * x;
}

Let's call this method:

double percent = 10;
tripleValue(percent);

However, this does not work. After the method call, the value of percent is still 10. Here is what happens:

1. x is initialized with a copy of the value of percent (that is, 10).

2. x is tripled—it is now 30. But percent is still 10 (see Figure 4-6).

   Figure 4-6. Modifying a numeric parameter has no lasting effect

   

   
   

3. The method ends, and the parameter variable x is no longer in use.

There are, however, two kinds of method parameters:

• Primitive types (numbers, Boolean values)

• Object references

You have seen that it is impossible for a method to change a primitive type parameter. The situation is different for object parameters. You can easily implement a method that triples the salary of an employee:

public static void tripleSalary(Employee x) // works
{
   x.raiseSalary(200);
}

When you call

harry = new Employee(. . .);
tripleSalary(harry);

then the following happens:

1. x is initialized with a copy of the value of harry, that is, an object reference.

2. The raiseSalary method is applied to that object reference. The Employee object to which both x and harry refer gets its salary raised by 200 percent.

3. The method ends, and the parameter variable x is no longer in use. Of course, the object variable harry continues to refer to the object whose salary was tripled (see Figure 4-7).

   Figure 4-7. Modifying an object parameter has a lasting effect

   

   
   

As you have seen, it is easily possible—and in fact very common—to implement methods that change the state of an object parameter. The reason is simple. The method gets a copy of the object reference, and both the original and the copy refer to the same object.

Many programming languages (in particular, C++ and Pascal) have two methods for parameter passing: call by value and call by reference. Some programmers (and unfortunately even some book authors) claim that the Java programming language uses call by reference for objects. However, that is false. Because this is such a common misunderstanding, it is worth examining a counterexample in detail.

Let's try to write a method that swaps two employee objects:

public static void swap(Employee x, Employee y) // doesn't work
{
   Employee temp = x;
   x = y;
   y = temp;
}

If the Java programming language used call by reference for objects, this method would work:

Employee a = new Employee("Alice", . . .);
Employee b = new Employee("Bob", . . .);
swap(a, b);
// does a now refer to Bob, b to Alice?

However, the method does not actually change the object references that are stored in the variables a and b. The x and y parameters of the swap method are initialized with copies of these references. The method then proceeds to swap these copies.

// x refers to Alice, y to Bob
Employee temp = x;
x = y;
y = temp;
// now x refers to Bob, y to Alice

But ultimately, this is a wasted effort. When the method ends, the parameter variables x and y are abandoned. The original variables a and b still refer to the same objects as they did before the method call (see Figure 4-8).

Figure 4-8. Swapping object parameters has no lasting effect

This discussion demonstrates that the Java programming language does not use call by reference for objects. Instead, object references are passed by value.

Here is a summary of what you can and cannot do with method parameters in the Java programming language:

• A method cannot modify a parameter of primitive type (that is, numbers or Boolean values).

• A method can change the state of an object parameter.

• A method cannot make an object parameter refer to a new object.

The program in Example 4-4 demonstrates these facts. The program first tries to triple the value of a number parameter and does not succeed:

Testing tripleValue:
Before: percent=10.0
End of method: x=30.0
After: percent=10.0

It then successfully triples the salary of an employee:

Testing tripleSalary:
Before: salary=50000.0
End of method: salary=150000.0
After: salary=150000.0

After the method, the state of the object to which harry refers has changed. This is possible because the method modified the state through a copy of the object reference.

Finally, the program demonstrates the failure of the swap method:

Testing swap:
Before: a=Alice
Before: b=Bob
End of method: x=Bob
End of method: y=Alice
After: a=Alice
After: b=Bob

As you can see, the parameter variables x and y are swapped, but the variables a and b are not affected.

C++ NOTE

C++ has both call by value and call by reference. You tag reference parameters with &. For example, you can easily implement methods void tripleValue(double& x) or void swap(Employee& x, Employee& y) that modify their reference parameters.

Example 4-4. ParamTest.java

 1. public class ParamTest
 2. {
 3.    public static void main(String[] args)
 4.    {
 5.       /*
 6.          Test 1: Methods can't modify numeric parameters
 7.       */
 8.       System.out.println("Testing tripleValue:");
 9.       double percent = 10;
10.       System.out.println("Before: percent=" + percent);
11.       tripleValue(percent);
12.       System.out.println("After: percent=" + percent);
13.
14.       /*
15.          Test 2: Methods can change the state of object
16.          parameters
17.       */
18.       System.out.println("/nTesting tripleSalary:");
19.       Employee harry = new Employee("Harry", 50000);
20.       System.out.println("Before: salary=" + harry.getSalary());
21.       tripleSalary(harry);
22.       System.out.println("After: salary=" + harry.getSalary());
23.
24.       /*
25.         Test 3: Methods can't attach new objects to
26.         object parameters
27.       */
28.       System.out.println("/nTesting swap:");
29.       Employee a = new Employee("Alice", 70000);
30.       Employee b = new Employee("Bob", 60000);
31.       System.out.println("Before: a=" + a.getName());
32.       System.out.println("Before: b=" + b.getName());
33.       swap(a, b);
34.       System.out.println("After: a=" + a.getName());
35.       System.out.println("After: b=" + b.getName());
36.    }
37.
38.    public static void tripleValue(double x) // doesn't work
39.    {
40.       x = 3 * x;
41.       System.out.println("End of method: x=" + x);
42.    }
43.
44.    public static void tripleSalary(Employee x) // works
45.    {
46.       x.raiseSalary(200);
47.       System.out.println("End of method: salary="
48.          + x.getSalary());
49.    }
50.
51.    public static void swap(Employee x, Employee y)
52.    {
53.       Employee temp = x;
54.       x = y;
55.       y = temp;
56.       System.out.println("End of method: x=" + x.getName());
57.       System.out.println("End of method: y=" + y.getName());
58.    }
59. }
60.
61. class Employee // simplified Employee class
62. {
63.    public Employee(String n, double s)
64.    {
65.       name = n;
66.       salary = s;
67.    }
68.
69.    public String getName()
70.    {
71.       return name;
72.    }
73.
74.    public double getSalary()
75.    {
76.       return salary;
77.    }
78.
79.    public void raiseSalary(double byPercent)
80.    {
81.       double raise = salary * byPercent / 100;
82.       salary += raise;
83.    }
84.
85.    private String name;
86.    private double salary;
87. }

”  
    《thinking in java》（3rd edition）中也对传值和传引用的问题进行了阐述，作者的看法更宽松一些，传达的意思却是一样的，这里引用一些内容,(由于ebook本身的原因，不能复制文字，这里直接用图片了)：
“


”。