为freetextbox1.6.5上传图片加上水印
来源:互联网 发布:传记电影票房数据分析 编辑:程序博客网 时间:2024/06/08 19:14
Graphics的DrawImage方法,定义了多种原型,可以在制定位置绘制指定Image对象。利用此方法可以在图片对象上再绘制一个水印图片。结合FreeTextBox方便的图片上传功能,可以实现一个适合图片新闻较多的新闻系统。以下WaterMark方法所带参数为文件流,原始图片名称,水印图片名称,图片保存路径等,对应注释理解代码应该没有多大问题。
-----------------------------------------------------------------
public void WaterMark(Stream inputStream, string fileName, string
markName, string picPath)
{
string WorkingDirectory =
HttpContext.Current.Request.PhysicalApplicationPath + "//" + picPath;
Stream PhotoStream = inputStream;
string WatermarkName = markName;
string PhotoFinalName = fileName;
//create a image object containing the photograph to watermark
System.Drawing.Image imgPhoto = System.Drawing.Image.FromStream(PhotoStream);
int phWidth = imgPhoto.Width;
int phHeight = imgPhoto.Height;
//create a image object containing the watermark
System.Drawing.Image imgWatermark = new Bitmap(WorkingDirectory + "//" + WatermarkName);
int wmWidth = imgWatermark.Width;
int wmHeight = imgWatermark.Height;
//Create a Bitmap
Bitmap bmWatermark = new Bitmap(PhotoStream);
bmWatermark.SetResolution(imgPhoto.HorizontalResolution, imgPhoto.VerticalResolution);
//Load this Bitmap into a new Graphic Object
Graphics grWatermark = Graphics.FromImage(bmWatermark);
ImageAttributes imageAttributes = new ImageAttributes();
//This color manipulation is used to change the opacity of the
//watermark. This is done by applying a 5x5 matrix that contains the
//coordinates for the RGBA space. By setting the 3rd row and 3rd column
//to 0.3f we achive a level of opacity
float[][] colorMatrixElements = {
new float[] {1.0f, 0.0f, 0.0f, 0.0f, 0.0f},
new float[] {0.0f, 1.0f, 0.0f, 0.0f, 0.0f},
new float[] {0.0f, 0.0f, 1.0f, 0.0f, 0.0f},
new float[] {0.0f, 0.0f, 0.0f, 0.3f, 0.0f},
new float[] {0.0f, 0.0f, 0.0f, 0.0f, 1.0f}};
ColorMatrix wmColorMatrix = new ColorMatrix(colorMatrixElements);
imageAttributes.SetColorMatrix(wmColorMatrix, ColorMatrixFlag.Default,
ColorAdjustType.Bitmap);
//For this example we will place the watermark in the upper right
//hand corner of the photograph. offset down 10 pixels and to the
//left 10 pixles
int xPosOfWm = ((phWidth - wmWidth)-10);
int yPosOfWm = 10;
grWatermark.DrawImage(imgWatermark,
new Rectangle(xPosOfWm,yPosOfWm,wmWidth,wmHeight), //Set the detination Position
0, // x-coordinate of the portion of the source image to draw.
0, // y-coordinate of the portion of the source image to draw.
wmWidth, // Watermark Width
wmHeight, // Watermark Height
GraphicsUnit.Pixel, // Unit of measurment
imageAttributes); //ImageAttributes Object
//Replace the original photgraphs bitmap with the new Bitmap
imgPhoto = bmWatermark;
grWatermark.Dispose();
//save new image to file system.
imgPhoto.Save(WorkingDirectory + "//" + PhotoFinalName, ImageFormat.Jpeg);
imgPhoto.Dispose();
imgWatermark.Dispose();
PhotoStream.Close();
}
--------------------------------------------------------------------
FTB的图片上传主要利用HtmlInputFile控件,对应HtmlInputFile类的属性PostedFile,它含有SaveAs方法可以来保存图片。当然我们不希望在图片保存完之后再专门读它建Graphics对象来再次处理,因此查了MSDN,发现PostedFile属性返回的是HttpPostedFile 类的一个实例,而HttpPostedFile 有InputStream对象,通过HtmlInputFile控件上传的文件可以通过该Stream对象获得上传文件流,作为WaterMake的参数实现最终功能。
所以最后只要在FTB中把ftb.imagegallery.aspx文件第77行UploadFile.PostedFile.SaveAs那句注释,并替换为对WaterMake方法的调用就行:WaterMark(UploadFile.PostedFile.InputStream, UploadFileName, "watermark.bmp", "UploadPics");当然还要把WaterMake方法放到代码中。
-----------------------------------------------------------------
public void WaterMark(Stream inputStream, string fileName, string
markName, string picPath)
{
string WorkingDirectory =
HttpContext.Current.Request.PhysicalApplicationPath + "//" + picPath;
Stream PhotoStream = inputStream;
string WatermarkName = markName;
string PhotoFinalName = fileName;
//create a image object containing the photograph to watermark
System.Drawing.Image imgPhoto = System.Drawing.Image.FromStream(PhotoStream);
int phWidth = imgPhoto.Width;
int phHeight = imgPhoto.Height;
//create a image object containing the watermark
System.Drawing.Image imgWatermark = new Bitmap(WorkingDirectory + "//" + WatermarkName);
int wmWidth = imgWatermark.Width;
int wmHeight = imgWatermark.Height;
//Create a Bitmap
Bitmap bmWatermark = new Bitmap(PhotoStream);
bmWatermark.SetResolution(imgPhoto.HorizontalResolution, imgPhoto.VerticalResolution);
//Load this Bitmap into a new Graphic Object
Graphics grWatermark = Graphics.FromImage(bmWatermark);
ImageAttributes imageAttributes = new ImageAttributes();
//This color manipulation is used to change the opacity of the
//watermark. This is done by applying a 5x5 matrix that contains the
//coordinates for the RGBA space. By setting the 3rd row and 3rd column
//to 0.3f we achive a level of opacity
float[][] colorMatrixElements = {
new float[] {1.0f, 0.0f, 0.0f, 0.0f, 0.0f},
new float[] {0.0f, 1.0f, 0.0f, 0.0f, 0.0f},
new float[] {0.0f, 0.0f, 1.0f, 0.0f, 0.0f},
new float[] {0.0f, 0.0f, 0.0f, 0.3f, 0.0f},
new float[] {0.0f, 0.0f, 0.0f, 0.0f, 1.0f}};
ColorMatrix wmColorMatrix = new ColorMatrix(colorMatrixElements);
imageAttributes.SetColorMatrix(wmColorMatrix, ColorMatrixFlag.Default,
ColorAdjustType.Bitmap);
//For this example we will place the watermark in the upper right
//hand corner of the photograph. offset down 10 pixels and to the
//left 10 pixles
int xPosOfWm = ((phWidth - wmWidth)-10);
int yPosOfWm = 10;
grWatermark.DrawImage(imgWatermark,
new Rectangle(xPosOfWm,yPosOfWm,wmWidth,wmHeight), //Set the detination Position
0, // x-coordinate of the portion of the source image to draw.
0, // y-coordinate of the portion of the source image to draw.
wmWidth, // Watermark Width
wmHeight, // Watermark Height
GraphicsUnit.Pixel, // Unit of measurment
imageAttributes); //ImageAttributes Object
//Replace the original photgraphs bitmap with the new Bitmap
imgPhoto = bmWatermark;
grWatermark.Dispose();
//save new image to file system.
imgPhoto.Save(WorkingDirectory + "//" + PhotoFinalName, ImageFormat.Jpeg);
imgPhoto.Dispose();
imgWatermark.Dispose();
PhotoStream.Close();
}
--------------------------------------------------------------------
FTB的图片上传主要利用HtmlInputFile控件,对应HtmlInputFile类的属性PostedFile,它含有SaveAs方法可以来保存图片。当然我们不希望在图片保存完之后再专门读它建Graphics对象来再次处理,因此查了MSDN,发现PostedFile属性返回的是HttpPostedFile 类的一个实例,而HttpPostedFile 有InputStream对象,通过HtmlInputFile控件上传的文件可以通过该Stream对象获得上传文件流,作为WaterMake的参数实现最终功能。
所以最后只要在FTB中把ftb.imagegallery.aspx文件第77行UploadFile.PostedFile.SaveAs那句注释,并替换为对WaterMake方法的调用就行:WaterMark(UploadFile.PostedFile.InputStream, UploadFileName, "watermark.bmp", "UploadPics");当然还要把WaterMake方法放到代码中。
- 为freetextbox1.6.5上传图片加上水印
- 为freetextbox1.6.5上传图片加上水印
- 为freetextbox1.6.5上传图片加上水印
- 上传图片加上水印
- aspjpeg为图片加上水印
- Struts1.X上传图片后加上水印
- php上传图片加上文字水印
- 使用Handler为图片加上数字水印
- ios 为图片加上水印详解
- 为上传图片打上水印
- ASP.net 为上传的图片加上一个logo图片水印(生成图片质量非常高)
- ASP.NET(C#)上传图片加上文字或图片水印
- 给图片加上水印
- 给图片加上水印
- 给你的图片加上水印
- 远程图片自动保存到本地并为图片加上水印
- 上传图片添加水印
- 上传图片加水印
- using的几种用法
- C#中"is" vs "as"
- 遍历ArrayList易犯错误
- 每个开发人员现在应该下载的十种必备工具
- .net控件FreeTextBox使用方法
- 为freetextbox1.6.5上传图片加上水印
- FreeTextBox实现机制
- Struts DataSource
- FreeTextBox的ToolbarButton整理
- 针对SQL INJECTION的SQL SERVER安全设置初级篇
- [转载自nylx的Blog]看看老外的开源项目
- SQL SERVER与ACCESS、EXCEL的数据转换
- Longhorn明年5月完成 微软将推7个版本
- Internet Explorer 6 中的 CSS 增强功能