BW--ABAP to copy aggregates from one cube to another
来源：互联网 发布：淘宝模特照相视频 编辑：程序博客网 时间：2024/05/16 15:18
In COPA you have often a data model consisting of similar cubes but with different data.You can have e.g. a cube for data of the current year, another cube with data of the previous year and a last one with data older than 2 years. For good query performance you create aggregates. Because of the similarities between the cubes it would be nice to have a FM or ABAP that copies one aggregate from a cube to another cube. Better would be to copy all aggregates from the old to the new cubes. If you search in the repository and SDN, you will find report RSDDK_AGGRCOMP_COPY. This report copies one aggregate by its technical name or UID to the destination cube. So I played around with it and found some issues:
*&
*&---------------------------------------------------------------------*
*& copies aggregates from one cube to another
*& works for real-time cubes too
*&
*&---------------------------------------------------------------------*
REPORT ZAGGR_COPY.
TYPE-POOLS: rs, rsddk, rshi, rrsm, rrsi.
DATA:
l_r_aggr_collection TYPE REF TO cl_rsddk_aggregate_collection,
l_t_aggrdir like table of rsddaggrdir,
l_s_aggrdir like rsddaggrdir,
l_aggruid TYPE rsddaggruid,
l_infocube_old TYPE rsd_infocube,
l_cubetype TYPE rscubetype,
l_no_authority TYPE rs_bool,
l_expert_mode TYPE rs_bool,
l_txtsh TYPE rstxtsh,
l_txtlg TYPE rstxtlg,
l_t_aggrt TYPE rsddk_t_aggrt_db,
l_s_aggrt TYPE rsddaggrt,
l_s_aggrcomp TYPE rsddk_s_aggrcomp_db,
l_t_aggrcomp TYPE rsddk_t_aggrcomp_db,
l_t_aggrcomp_del TYPE rsddk_t_aggrcomp_db,
l_t_aggrcomp_all type rsddk_t_aggrcomp_db,
l_t_cob_pro TYPE rsd_t_cob_pro.
FIELD-SYMBOLS:
<l_s_aggrcomp> TYPE rsddk_s_aggrcomp_db.
* select-options:
* aggregate to be copied
SELECTION-SCREEN: BEGIN OF BLOCK b1
WITH FRAME TITLE text-101.
PARAMETERS:
i_scube TYPE rsdcube-infocube,
i_aggr TYPE rsd_infocube,
i_auid TYPE rsddaggruid.
SELECTION-SCREEN: END OF BLOCK b1,
* infocube to which aggregate should be copied
SKIP 1,
BEGIN OF BLOCK b2
WITH FRAME TITLE text-102.
PARAMETERS:
i_cube TYPE rsdcube-infocube.
SELECTION-SCREEN: END OF BLOCK b2.
AT SELECTIOn-SCREEN ON VALUE-REQUEST FOR i_cube.
PERFORM f_valuerequest_icube.
AT SELECTIOn-SCREEN ON VALUE-REQUEST FOR i_scube.
PERFORM f_valuerequest_scube.
AT SELECTIOn-SCREEN ON VALUE-REQUEST FOR i_aggr.
PERFORM f_valuerequest_aggr.
END-OF-SELECTION.
* check if target infocube exists!
SELECT SINGLE cubetype FROM rsdcube
INTO l_cubetype
WHERE infocube = i_cube
AND objvers = rs_c_objvers-active.
IF sy-subrc <> 0 OR
l_cubetype NE 'B'.
* no valid infocube selection.
WRITE: / text-128 COLOR COL_NEGATIVE.
EXIT.
ENDIF.
* check if source infocube exists!
SELECT SINGLE cubetype FROM rsdcube
INTO l_cubetype
WHERE infocube = i_scube
AND objvers = rs_c_objvers-active.
IF sy-subrc <> 0 OR
l_cubetype NE 'B'.
* no valid infocube selection.
WRITE: / text-120 COLOR COL_NEGATIVE.
EXIT.
ENDIF.
* authority check from RSDDV ************************
CALL FUNCTION 'RSSB_AUTHORITY_ADMWB_INFOCUBE'
EXPORTING
i_actvt = 'U'
i_infocube = i_cube
i_icubeobj = rssb_c_auth_icubeobj-aggregate
i_try_display = rs_c_true
IMPORTING
e_display_only = l_no_authority.
IF l_no_authority = rs_c_true.
WRITE: / text-124 COLOR COL_NEGATIVE.
EXIT.
ENDIF.
* check for lock and set lock for INFOPROV
CALL METHOD cl_rsd_dta=>enqueue
EXPORTING
i_infoprov = i_cube
i_scope = '1'
EXCEPTIONS
foreign_lock = 1
sys_failure = 2
OTHERS = 4.
IF sy-subrc <> 0.
WRITE: / text-125 COLOR COL_NEGATIVE, sy-msgv2 COLOR COL_NEGATIVE.
EXIT.
ENDIF.
* cob_pro for infocube
CALL FUNCTION 'RSD_COB_PRO_ALL_GET'
EXPORTING
i_infocube = i_cube
i_with_atr_nav = rs_c_true
i_objvers = rs_c_objvers-active
i_bypass_buffer = rs_c_false
IMPORTING
e_t_cob_pro = l_t_cob_pro
EXCEPTIONS
infocube_not_found = 1
error_reading_infocatalog = 2
illegal_input = 3
OTHERS = 4.
IF sy-subrc <> 0.
WRITE: / text-122 COLOR COL_NEGATIVE.
EXIT.
ENDIF.
* get aggregate definition
IF NOT ( i_aGGR IS INITIAL ).
refresh l_t_aggrdir.
SELECT *
FROM rsddaggrdir
INTO table l_T_aggrdir
* SELECT SINGLE aggruid infocube expertmode
* FROM rsddaggrdir
* INTO (l_aggruid, l_infocube_old, l_expert_mode)
WHERE aggrcube = i_aggr
AND objvers = rs_c_objvers-modified.
IF sy-subrc <> 0.
* aggregate not found
WRITE: / text-121 COLOR COL_NEGATIVE.
EXIT.
ENDIF.
ELSEIF not ( i_SCUBE is initial ).
SELECT *
FROM rsddaggrdir
INTO table l_T_aggrdir
WHERE infocube = i_scube
AND objvers = rs_c_objvers-modified.
ELSE.
l_aggruid = i_auid.
l_s_aggrdir-aggruid = i_auid.
append l_s_aggrdir to l_t_aggrdir.
ENDIF.
Loop at l_t_aggrdir into l_s_aggrdir.
refresh l_t_aggrt.
l_aggruid = l_S_aggrdir-aggruid.
l_infocube_old = l_s_aggrdir-infocube.
l_expert_mode = l_s_aggrdir-expertmode.
SELECT * FROM rsddaggrcomp
INTO TABLE l_t_aggrcomp
WHERE aggruid = l_aggruid
AND objvers = rs_c_objvers-modified.
IF sy-subrc <> 0.
* aggregate not found
WRITE: / text-121 COLOR COL_NEGATIVE.
EXIT.
ENDIF.
* compare aggregate definition and cob_pro of infocube
LOOP AT l_t_aggrcomp INTO l_s_aggrcomp.
READ TABLE l_t_cob_pro
TRANSPORTING NO FIELDS
WITH KEY iobjnm = l_s_aggrcomp-iobjnm.
IF sy-subrc <> 0.
DELETE TABLE l_t_aggrcomp FROM l_s_aggrcomp.
APPEND l_s_aggrcomp TO l_t_aggrcomp_del.
ENDIF.
ENDLOOP.
IF l_t_aggrcomp IS INITIAL.
WRITE: / text-123 COLOR COL_NEGATIVE.
EXIT.
ENDIF.
* create new texts
SELECT SINGLE * FROM rsddaggrt
INTO l_s_aggrt
WHERE aggruid = l_aggruid
AND objvers = rs_c_objvers-modified
AND langu = sy-langu.
* get new UID
CALL FUNCTION 'RSS_SYSTEM_GET_UNIQUE_ID'
IMPORTING
e_uni_idc25 = l_aggruid.
* and create new aggregate definition
LOOP AT l_t_aggrcomp ASSIGNING <l_s_aggrcomp>.
<l_s_aggrcomp>-aggruid = l_aggruid.
ENDLOOP.
l_s_aggrt-aggruid = l_aggruid.
APPEND l_s_aggrt TO l_t_aggrt.
* instantiate class
CREATE OBJECT l_r_aggr_collection
EXPORTING
i_infoprov = i_cube
i_view_only = rs_c_false.
* set expert mode
CALL METHOD l_r_aggr_collection->set_expert_mode
EXPORTING
i_expert_mode = l_expert_mode.
* create aggregate
CALL METHOD l_r_aggr_collection->aggregate_create
EXPORTING
i_t_aggrcomp = l_t_aggrcomp
i_t_aggrt = l_t_aggrt
i_aggruid = l_aggruid
i_expert_mode = l_expert_mode.
* save definition
CALL METHOD l_r_aggr_collection->save.
* OUTPUT
WRITE: / , text-110 COLOR COL_HEADING.
WRITE: / , text-117 COLOR COL_POSITIVE, l_s_aggrt-txtlg .
WRITE: / , text-111 COLOR COL_POSITIVE, l_aggruid .
WRITE: / .
* infoobjects that are copied
WRITE: / , text-126 COLOR COL_POSITIVE.
WRITE: / , text-112, text-113, text-114, text-115, text-116.
LOOP AT l_t_aggrcomp INTO l_s_aggrcomp.
WRITE: / , l_s_aggrcomp-iobjnm, l_s_aggrcomp-aggrst,
l_s_aggrcomp-fixsid, l_s_aggrcomp-hiesid,
l_s_aggrcomp-tlevel.
ENDLOOP.
WRITE: / .
WRITE: / .
* infoobjects that are included by the checks
WRITE: / , text-127 COLOR COL_POSITIVE.
WRITE: / , text-112, text-113, text-114, text-115, text-116.
SELECT * FROM rsddaggrcomp
INTO table l_t_aggrcomp_all
WHERE aggruid = l_aggruid
AND objvers = rs_c_objvers-modified.
LOOP AT l_t_aggrcomp_all INTO l_s_aggrcomp.
READ TABLE l_t_aggrcomp
WITH KEY iobjnm = l_s_aggrcomp-iobjnm
TRANSPORTING NO FIELDS.
IF sy-subrc <> 0.
* infoobject was not in original, but included by cube-spec. checks
WRITE: / , l_s_aggrcomp-iobjnm, l_s_aggrcomp-aggrst,
l_s_aggrcomp-fixsid, l_s_aggrcomp-hiesid,
l_s_aggrcomp-tlevel.
ENDIF.
ENDLOOP.
WRITE: / .
WRITE: / .
* infoobjects that are not copied
WRITE: / , text-118 COLOR COL_POSITIVE.
WRITE: / , text-112, text-113, text-114, text-115, text-116.
LOOP AT l_t_aggrcomp_del INTO l_s_aggrcomp.
WRITE: / , l_s_aggrcomp-iobjnm, l_s_aggrcomp-aggrst,
l_s_aggrcomp-fixsid, l_s_aggrcomp-hiesid,
l_s_aggrcomp-tlevel.
ENDLOOP.
endloop. " overall aggregates of a cube
* release lock for INFOPROV
CALL METHOD cl_rsd_dta=>dequeue
EXPORTING
i_infoprov = i_cube
i_scope = '1'.
*&---------------------------------------------------------------------
*& Form f_valuerequest_icube
*&---------------------------------------------------------------------
FORM f_valuerequest_icube.
DATA: BEGIN OF t_data OCCURS 1,
data(20),
END OF t_data.
DATA: lwa_dfies TYPE dfies.
data h_field_wa LIKe dfies.
data h_field_tab like dfies occurs 0 with header line.
data h_dselc like dselc occurs 0 with header line.
data: ret_tab like table of ddshretval.
data: l_rsdcube like rsdcube.
refresh: t_data.
SELECT infocube FROM rsdcube into l_rsdcube where objvers = 'A'.
t_data = l_rsdcube-infocube. APPEND t_data.
ENDSELECT.
PERFORM f_fieldinfo_get USING 'RSDCUBE'
'INFOCUBE'
CHANGING h_field_wa.
APPEND h_field_wa TO h_field_tab.
h_dselc-fldname = 'INFOCUBE'.
h_dselc-dyfldname = 'I_CUBE'.
APPEND h_dselc.
DATA: ld_repid LIKE sy-repid.
ld_repid = sy-repid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'I_CUBE'
dynpprog = ld_repid
dynpnr = '1000'
dynprofield = 'I_CUBE'
*multiple_choice = ''
*value_org = 'S'
TABLES
value_tab = t_data
field_tab = h_field_tab
*return_tab = ret_tab
DYNPFLD_MAPPING = h_dselc
EXCEPTIONS
OTHERS = 0.
ENDFORM. " f_valuerequest_vbeln
FORM f_valuerequest_scube.
DATA: BEGIN OF t_data OCCURS 1,
data(20),
END OF t_data.
DATA: lwa_dfies TYPE dfies.
data h_field_wa LIKe dfies.
data h_field_tab like dfies occurs 0 with header line.
data h_dselc like dselc occurs 0 with header line.
data: l_rsdcube like rsdcube.
SELECT * FROM rsdcube into l_rsdcube where objvers = 'A'.
t_data = l_rsdcube-infocube. APPEND t_data.
ENDSELECT.
PERFORM f_fieldinfo_get USING 'RSDCUBE'
'INFOCUBE'
CHANGING h_field_wa.
APPEND h_field_wa TO h_field_tab.
h_dselc-fldname = 'INFOCUBE'.
h_dselc-dyfldname = 'I_SCUBE'.
APPEND h_dselc.
DATA: ld_repid LIKE sy-repid.
ld_repid = sy-repid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'I_SCUBE'
dynpprog = ld_repid
dynpnr = '1000'
dynprofield = 'I_SCUBE'
*multiple_choice = ''
*value_org = 'S'
TABLES
value_tab = t_data
field_tab = h_field_tab
*return_tab = return_tab
DYNPFLD_MAPPING = h_dselc
EXCEPTIONS
OTHERS = 0.
ENDFORM.
FORM f_valuerequest_aggr.
DATA: BEGIN OF t_data OCCURS 1,
data(20),
END OF t_data.
DATA: lwa_dfies TYPE dfies.
data h_field_wa LIKe dfies.
data h_field_tab like dfies occurs 0 with header line.
data h_dselc like dselc occurs 0 with header line.
data: l_rsdaggr like rsddaggrdir-aggrcube.
SELECT aggrcube FROM rsddaggrdir into l_rsdaggr where objvers = 'A'.
t_data = l_rsdaggr. APPEND t_data.
ENDSELECT.
PERFORM f_fieldinfo_get USING 'RSDDAGGRDIR'
'AGGRCUBE'
CHANGING h_field_wa.
APPEND h_field_wa TO h_field_tab.
h_dselc-fldname = 'AGGRCUBE'.
h_dselc-dyfldname = 'I_AGGR'.
APPEND h_dselc.
DATA: ld_repid LIKE sy-repid.
ld_repid = sy-repid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'I_AGGR'
dynpprog = ld_repid
dynpnr = '1000'
dynprofield = 'I_AGGR'
*multiple_choice = ''
*value_org = 'S'
TABLES
value_tab = t_data
field_tab = h_field_tab
*return_tab = return_tab
DYNPFLD_MAPPING = h_dselc
EXCEPTIONS
OTHERS = 0.
ENDFORM.
- It hasn’t any value-help for cubes – I spent times to find an error, blamed to find out I entered the wrong technical name-
- It doesn’t allow to copy all aggregates from source to the target cube
- Texts of the copied aggregate are different from the original
- It terminates very hard and not user friendly if target infocube doesn’t exist
The coding for the new report is now:
*& Report ZAGGR_COPY
*&
*&---------------------------------------------------------------------*
*& copies aggregates from one cube to another
*& works for real-time cubes too
*&
*&---------------------------------------------------------------------*
REPORT ZAGGR_COPY.
TYPE-POOLS: rs, rsddk, rshi, rrsm, rrsi.
DATA:
l_r_aggr_collection TYPE REF TO cl_rsddk_aggregate_collection,
l_t_aggrdir like table of rsddaggrdir,
l_s_aggrdir like rsddaggrdir,
l_aggruid TYPE rsddaggruid,
l_infocube_old TYPE rsd_infocube,
l_cubetype TYPE rscubetype,
l_no_authority TYPE rs_bool,
l_expert_mode TYPE rs_bool,
l_txtsh TYPE rstxtsh,
l_txtlg TYPE rstxtlg,
l_t_aggrt TYPE rsddk_t_aggrt_db,
l_s_aggrt TYPE rsddaggrt,
l_s_aggrcomp TYPE rsddk_s_aggrcomp_db,
l_t_aggrcomp TYPE rsddk_t_aggrcomp_db,
l_t_aggrcomp_del TYPE rsddk_t_aggrcomp_db,
l_t_aggrcomp_all type rsddk_t_aggrcomp_db,
l_t_cob_pro TYPE rsd_t_cob_pro.
FIELD-SYMBOLS:
<l_s_aggrcomp> TYPE rsddk_s_aggrcomp_db.
* select-options:
* aggregate to be copied
SELECTION-SCREEN: BEGIN OF BLOCK b1
WITH FRAME TITLE text-101.
PARAMETERS:
i_scube TYPE rsdcube-infocube,
i_aggr TYPE rsd_infocube,
i_auid TYPE rsddaggruid.
SELECTION-SCREEN: END OF BLOCK b1,
* infocube to which aggregate should be copied
SKIP 1,
BEGIN OF BLOCK b2
WITH FRAME TITLE text-102.
PARAMETERS:
i_cube TYPE rsdcube-infocube.
SELECTION-SCREEN: END OF BLOCK b2.
AT SELECTIOn-SCREEN ON VALUE-REQUEST FOR i_cube.
PERFORM f_valuerequest_icube.
AT SELECTIOn-SCREEN ON VALUE-REQUEST FOR i_scube.
PERFORM f_valuerequest_scube.
AT SELECTIOn-SCREEN ON VALUE-REQUEST FOR i_aggr.
PERFORM f_valuerequest_aggr.
END-OF-SELECTION.
* check if target infocube exists!
SELECT SINGLE cubetype FROM rsdcube
INTO l_cubetype
WHERE infocube = i_cube
AND objvers = rs_c_objvers-active.
IF sy-subrc <> 0 OR
l_cubetype NE 'B'.
* no valid infocube selection.
WRITE: / text-128 COLOR COL_NEGATIVE.
EXIT.
ENDIF.
* check if source infocube exists!
SELECT SINGLE cubetype FROM rsdcube
INTO l_cubetype
WHERE infocube = i_scube
AND objvers = rs_c_objvers-active.
IF sy-subrc <> 0 OR
l_cubetype NE 'B'.
* no valid infocube selection.
WRITE: / text-120 COLOR COL_NEGATIVE.
EXIT.
ENDIF.
* authority check from RSDDV ************************
CALL FUNCTION 'RSSB_AUTHORITY_ADMWB_INFOCUBE'
EXPORTING
i_actvt = 'U'
i_infocube = i_cube
i_icubeobj = rssb_c_auth_icubeobj-aggregate
i_try_display = rs_c_true
IMPORTING
e_display_only = l_no_authority.
IF l_no_authority = rs_c_true.
WRITE: / text-124 COLOR COL_NEGATIVE.
EXIT.
ENDIF.
* check for lock and set lock for INFOPROV
CALL METHOD cl_rsd_dta=>enqueue
EXPORTING
i_infoprov = i_cube
i_scope = '1'
EXCEPTIONS
foreign_lock = 1
sys_failure = 2
OTHERS = 4.
IF sy-subrc <> 0.
WRITE: / text-125 COLOR COL_NEGATIVE, sy-msgv2 COLOR COL_NEGATIVE.
EXIT.
ENDIF.
* cob_pro for infocube
CALL FUNCTION 'RSD_COB_PRO_ALL_GET'
EXPORTING
i_infocube = i_cube
i_with_atr_nav = rs_c_true
i_objvers = rs_c_objvers-active
i_bypass_buffer = rs_c_false
IMPORTING
e_t_cob_pro = l_t_cob_pro
EXCEPTIONS
infocube_not_found = 1
error_reading_infocatalog = 2
illegal_input = 3
OTHERS = 4.
IF sy-subrc <> 0.
WRITE: / text-122 COLOR COL_NEGATIVE.
EXIT.
ENDIF.
* get aggregate definition
IF NOT ( i_aGGR IS INITIAL ).
refresh l_t_aggrdir.
SELECT *
FROM rsddaggrdir
INTO table l_T_aggrdir
* SELECT SINGLE aggruid infocube expertmode
* FROM rsddaggrdir
* INTO (l_aggruid, l_infocube_old, l_expert_mode)
WHERE aggrcube = i_aggr
AND objvers = rs_c_objvers-modified.
IF sy-subrc <> 0.
* aggregate not found
WRITE: / text-121 COLOR COL_NEGATIVE.
EXIT.
ENDIF.
ELSEIF not ( i_SCUBE is initial ).
SELECT *
FROM rsddaggrdir
INTO table l_T_aggrdir
WHERE infocube = i_scube
AND objvers = rs_c_objvers-modified.
ELSE.
l_aggruid = i_auid.
l_s_aggrdir-aggruid = i_auid.
append l_s_aggrdir to l_t_aggrdir.
ENDIF.
Loop at l_t_aggrdir into l_s_aggrdir.
refresh l_t_aggrt.
l_aggruid = l_S_aggrdir-aggruid.
l_infocube_old = l_s_aggrdir-infocube.
l_expert_mode = l_s_aggrdir-expertmode.
SELECT * FROM rsddaggrcomp
INTO TABLE l_t_aggrcomp
WHERE aggruid = l_aggruid
AND objvers = rs_c_objvers-modified.
IF sy-subrc <> 0.
* aggregate not found
WRITE: / text-121 COLOR COL_NEGATIVE.
EXIT.
ENDIF.
* compare aggregate definition and cob_pro of infocube
LOOP AT l_t_aggrcomp INTO l_s_aggrcomp.
READ TABLE l_t_cob_pro
TRANSPORTING NO FIELDS
WITH KEY iobjnm = l_s_aggrcomp-iobjnm.
IF sy-subrc <> 0.
DELETE TABLE l_t_aggrcomp FROM l_s_aggrcomp.
APPEND l_s_aggrcomp TO l_t_aggrcomp_del.
ENDIF.
ENDLOOP.
IF l_t_aggrcomp IS INITIAL.
WRITE: / text-123 COLOR COL_NEGATIVE.
EXIT.
ENDIF.
* create new texts
SELECT SINGLE * FROM rsddaggrt
INTO l_s_aggrt
WHERE aggruid = l_aggruid
AND objvers = rs_c_objvers-modified
AND langu = sy-langu.
* get new UID
CALL FUNCTION 'RSS_SYSTEM_GET_UNIQUE_ID'
IMPORTING
e_uni_idc25 = l_aggruid.
* and create new aggregate definition
LOOP AT l_t_aggrcomp ASSIGNING <l_s_aggrcomp>.
<l_s_aggrcomp>-aggruid = l_aggruid.
ENDLOOP.
l_s_aggrt-aggruid = l_aggruid.
APPEND l_s_aggrt TO l_t_aggrt.
* instantiate class
CREATE OBJECT l_r_aggr_collection
EXPORTING
i_infoprov = i_cube
i_view_only = rs_c_false.
* set expert mode
CALL METHOD l_r_aggr_collection->set_expert_mode
EXPORTING
i_expert_mode = l_expert_mode.
* create aggregate
CALL METHOD l_r_aggr_collection->aggregate_create
EXPORTING
i_t_aggrcomp = l_t_aggrcomp
i_t_aggrt = l_t_aggrt
i_aggruid = l_aggruid
i_expert_mode = l_expert_mode.
* save definition
CALL METHOD l_r_aggr_collection->save.
* OUTPUT
WRITE: / , text-110 COLOR COL_HEADING.
WRITE: / , text-117 COLOR COL_POSITIVE, l_s_aggrt-txtlg .
WRITE: / , text-111 COLOR COL_POSITIVE, l_aggruid .
WRITE: / .
* infoobjects that are copied
WRITE: / , text-126 COLOR COL_POSITIVE.
WRITE: / , text-112, text-113, text-114, text-115, text-116.
LOOP AT l_t_aggrcomp INTO l_s_aggrcomp.
WRITE: / , l_s_aggrcomp-iobjnm, l_s_aggrcomp-aggrst,
l_s_aggrcomp-fixsid, l_s_aggrcomp-hiesid,
l_s_aggrcomp-tlevel.
ENDLOOP.
WRITE: / .
WRITE: / .
* infoobjects that are included by the checks
WRITE: / , text-127 COLOR COL_POSITIVE.
WRITE: / , text-112, text-113, text-114, text-115, text-116.
SELECT * FROM rsddaggrcomp
INTO table l_t_aggrcomp_all
WHERE aggruid = l_aggruid
AND objvers = rs_c_objvers-modified.
LOOP AT l_t_aggrcomp_all INTO l_s_aggrcomp.
READ TABLE l_t_aggrcomp
WITH KEY iobjnm = l_s_aggrcomp-iobjnm
TRANSPORTING NO FIELDS.
IF sy-subrc <> 0.
* infoobject was not in original, but included by cube-spec. checks
WRITE: / , l_s_aggrcomp-iobjnm, l_s_aggrcomp-aggrst,
l_s_aggrcomp-fixsid, l_s_aggrcomp-hiesid,
l_s_aggrcomp-tlevel.
ENDIF.
ENDLOOP.
WRITE: / .
WRITE: / .
* infoobjects that are not copied
WRITE: / , text-118 COLOR COL_POSITIVE.
WRITE: / , text-112, text-113, text-114, text-115, text-116.
LOOP AT l_t_aggrcomp_del INTO l_s_aggrcomp.
WRITE: / , l_s_aggrcomp-iobjnm, l_s_aggrcomp-aggrst,
l_s_aggrcomp-fixsid, l_s_aggrcomp-hiesid,
l_s_aggrcomp-tlevel.
ENDLOOP.
endloop. " overall aggregates of a cube
* release lock for INFOPROV
CALL METHOD cl_rsd_dta=>dequeue
EXPORTING
i_infoprov = i_cube
i_scope = '1'.
*&---------------------------------------------------------------------
*& Form f_valuerequest_icube
*&---------------------------------------------------------------------
FORM f_valuerequest_icube.
DATA: BEGIN OF t_data OCCURS 1,
data(20),
END OF t_data.
DATA: lwa_dfies TYPE dfies.
data h_field_wa LIKe dfies.
data h_field_tab like dfies occurs 0 with header line.
data h_dselc like dselc occurs 0 with header line.
data: ret_tab like table of ddshretval.
data: l_rsdcube like rsdcube.
refresh: t_data.
SELECT infocube FROM rsdcube into l_rsdcube where objvers = 'A'.
t_data = l_rsdcube-infocube. APPEND t_data.
ENDSELECT.
PERFORM f_fieldinfo_get USING 'RSDCUBE'
'INFOCUBE'
CHANGING h_field_wa.
APPEND h_field_wa TO h_field_tab.
h_dselc-fldname = 'INFOCUBE'.
h_dselc-dyfldname = 'I_CUBE'.
APPEND h_dselc.
DATA: ld_repid LIKE sy-repid.
ld_repid = sy-repid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'I_CUBE'
dynpprog = ld_repid
dynpnr = '1000'
dynprofield = 'I_CUBE'
*multiple_choice = ''
*value_org = 'S'
TABLES
value_tab = t_data
field_tab = h_field_tab
*return_tab = ret_tab
DYNPFLD_MAPPING = h_dselc
EXCEPTIONS
OTHERS = 0.
ENDFORM. " f_valuerequest_vbeln
FORM f_valuerequest_scube.
DATA: BEGIN OF t_data OCCURS 1,
data(20),
END OF t_data.
DATA: lwa_dfies TYPE dfies.
data h_field_wa LIKe dfies.
data h_field_tab like dfies occurs 0 with header line.
data h_dselc like dselc occurs 0 with header line.
data: l_rsdcube like rsdcube.
SELECT * FROM rsdcube into l_rsdcube where objvers = 'A'.
t_data = l_rsdcube-infocube. APPEND t_data.
ENDSELECT.
PERFORM f_fieldinfo_get USING 'RSDCUBE'
'INFOCUBE'
CHANGING h_field_wa.
APPEND h_field_wa TO h_field_tab.
h_dselc-fldname = 'INFOCUBE'.
h_dselc-dyfldname = 'I_SCUBE'.
APPEND h_dselc.
DATA: ld_repid LIKE sy-repid.
ld_repid = sy-repid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'I_SCUBE'
dynpprog = ld_repid
dynpnr = '1000'
dynprofield = 'I_SCUBE'
*multiple_choice = ''
*value_org = 'S'
TABLES
value_tab = t_data
field_tab = h_field_tab
*return_tab = return_tab
DYNPFLD_MAPPING = h_dselc
EXCEPTIONS
OTHERS = 0.
ENDFORM.
FORM f_valuerequest_aggr.
DATA: BEGIN OF t_data OCCURS 1,
data(20),
END OF t_data.
DATA: lwa_dfies TYPE dfies.
data h_field_wa LIKe dfies.
data h_field_tab like dfies occurs 0 with header line.
data h_dselc like dselc occurs 0 with header line.
data: l_rsdaggr like rsddaggrdir-aggrcube.
SELECT aggrcube FROM rsddaggrdir into l_rsdaggr where objvers = 'A'.
t_data = l_rsdaggr. APPEND t_data.
ENDSELECT.
PERFORM f_fieldinfo_get USING 'RSDDAGGRDIR'
'AGGRCUBE'
CHANGING h_field_wa.
APPEND h_field_wa TO h_field_tab.
h_dselc-fldname = 'AGGRCUBE'.
h_dselc-dyfldname = 'I_AGGR'.
APPEND h_dselc.
DATA: ld_repid LIKE sy-repid.
ld_repid = sy-repid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'I_AGGR'
dynpprog = ld_repid
dynpnr = '1000'
dynprofield = 'I_AGGR'
*multiple_choice = ''
*value_org = 'S'
TABLES
value_tab = t_data
field_tab = h_field_tab
*return_tab = return_tab
DYNPFLD_MAPPING = h_dselc
EXCEPTIONS
OTHERS = 0.
ENDFORM.
*&---------------------------------------------------------------------
*& Form f_fieldinfo_get
*&---------------------------------------------------------------------
*text
*----------------------------------------------------------------------
*-->P_0079 text
*-->P_0080 text
*<--P_H_FIELD_WA text
*----------------------------------------------------------------------
FORM f_fieldinfo_get USING fu_tabname
fu_fieldname
CHANGING fwa_field_tab.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
TABNAME = fu_tabname
FIELDNAME = fu_fieldname
LFIELDNAME = fu_fieldname
IMPORTING
DFIES_WA = fwa_field_tab
EXCEPTIONS
NOT_FOUND = 1
INTERNAL_ERROR = 2
OTHERS = 3
.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " f_fieldinfo_get
To work properly you need this textelements:
101 Which Aggregate Definition Is To Be Copied?
102 For Which InfoCube Is This Aggregate To Be Created?
103 (Copy)
104 Copy of Cube
110 New Aggregate Successfully Created
111 UID of New Aggregate:
112 InfoObject
113 Aggregation Level
114 Fixed Value
115 Hierarchy SID
116 Hierarchy Level
117 Name of New Aggregate:
118 Unused InfoObjects
120 SourceInfoCube Is Not A BasicCube. An Aggregate Cannot Be Created
121 The Specified Aggregate Does Not Exist
122 COB_PRO Does Not Exist For This InfoCube
123 New Aggregate Definition Would Be Empty. Aggregate Not Created
124 No Authorization To Create Aggregates
125 Aggregate Cannot Be Created As Transaction Is Locked By:
126 Transferred InfoObjects in Aggregate
127 InfoCube-Specific InfoObjects in Aggregate
128 TargetInfoCube Is Not A BasicCube. An Aggregate Cannot Be Created
source link: https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/8352
- BW--ABAP to copy aggregates from one cube to another
- ABAP to copy aggregates from one cube to another
- ABAP to copy aggregates from one cube to another
- copy from one array to another
- BAPI to Copy Materials from one Plant to Another
- BAPI to Copy Materials from one Plant to Another
- BAPI to Copy Materials from one Plant to Another
- sql server 2008 copy data from one table to another
- BW--ABAP code using BAPI's to load data into Cube from SpreadSheets
- BW--ABAP code using BAPI's to load data into Cube from SpreadSheets
- copy.py(copy files from one directory to another directory and rename)
- Transferring Data from One Table to Another
- Migrating Queries from One User To Another
- Transfer Statistics from one Database to Another
- How to move Oracle data from one machine to another
- 从一个表的数据拷贝到另一个表,Copy all columns from one table to another table:
- one word to another.
- Moving entities from one AutoCAD layer to another using .NET
- RJ-48 和RJ-45 的区别
- ISO C++ operator+ 重载方法
- .NET代码执行顺序探讨
- 增加MsFlexGrid的编辑功能
- 理解C语言位域
- BW--ABAP to copy aggregates from one cube to another
- 使用Twisted的adbapi操作数据库
- [转]spring声明式事务管理祥述
- 转:Spring中ref local与ref bean区别
- 如何打造安全的Web站点
- 转：C#实现简单分布式搜索--------希望有时间能好好研究一下
- 搜索引擎及其它的4种设计方案
- 欢迎加入甜蜜计划！～
- VC制作简易flash播放器
