Cisco switchport trunk encapsulation dot1q 详解
来源:互联网 发布:阿里云买卖域名 编辑:程序博客网 时间:2024/06/07 16:39
dot1q-tunnel: 用在Q-in-Q隧道配置中。Cisco网络设备支持动态协商端口的工作状态,这为网络设备的实施提供了一定的方便(但不建议使用动态方式)。Cisco动态协商协议从最初 的DISL(Cisco私有协议)发展到DTP(公有协议)。根据动态协议的实现方式,Cisco网络设备接口主要分为下面几种模式:
1、switchport mode access: 强制接口成为access接口,并且可以与对方主动进行协商,诱使对方成为access模式。
2、switchport mode dynamic desirable: 主动与对协商成为Trunk接口的可能性,如果邻居接口模式为Trunk/desirable/auto之一,则接口将变成trunk接口工作。如果不能 形成trunk模式,则工作在access模式。这种模式是现在交换机的默认模式。
3、switchport mode dynamic auto: 只有邻居交换机主动与自己协商时才会变成Trunk接口,所以它是一种被动模式,当邻居接口为Trunk/desirable之一时,才会成为 Trunk。如果不能形成trunk模式,则工作在access模式。
4、switchport mode trunk: 强制接口成为Trunk接口,并且主动诱使对方成为Trunk模式,所以当邻居交换机接口为trunk/desirable/auto时会成为Trunk 接口。
5、switchport nonegotiate: 严格的说,这不算是种接口模式,它的作用只是阻止交换机接口发出DTP数据包,它必须与switchport mode trunk或者switchport mode access一起使用。
6、switchport mode dot1q-tunnel: 配置交换机接口为隧道接口(非Trunk),以便与用户交换机的Trunk接口形成不对称链路。
0 0
- Cisco switchport trunk encapsulation dot1q 详解
- cisco交换机trunk与switchport access vlan vlan-id共存的问题
- switchport trunk native 的原理与作用
- dot1q
- TRUNK详解
- Command rejected: An interface whose trunk encapsulation is "Auto" can not be configured to "trunk"
- encapsulation
- Cisco三层交换机端口设置trunk方法
- trunk函数详解
- switchport nonegotiate
- switchport mode
- 配置Cisco VLAN、VLAN Trunk、VTP和 STP
- cisco VTP(VLAN Trunk Protocol)/VTY(Virtual Teletype Terminal)
- CISCO学习笔记(四)Trunk功能及端口模式
- Cisco交换机Monitor Trunk接口时Tag包会被去掉
- SVN trunk branches tag详解
- 单臂路由&&Trunk详解
- vlan dot1q tag native
- 学习笔记之指针和引用的区别
- Mysql group_concat的反向应用实现(Mysql列转行)
- 命名空间
- Android中的绝对路径和相对路径
- 分页jsp PageBean
- Cisco switchport trunk encapsulation dot1q 详解
- PHP安装redis扩展
- 异步回调
- java 分页 PageService
- mex 里面调用matlab函数
- Longest Substring Without Repeating Characters
- 关联查询
- Java生成随机码(兑换码),带大小、小写字母、数字。
- 如何更改android Studio logcat字体大小?