《OpenCV》Part4 OpenCV3.1.0 提取视频中的每一帧
来源:互联网 发布:恢复出厂设置了怎么恢复数据 编辑:程序博客网 时间:2024/05/16 08:31
《OpenCV》Part4 OpenCV3.1.0 提取视频中的每一帧
看到一篇好的博文,忍不住扒下来了。提取视频中的每一帧,并保存成图片,支持摄像头和视频(.avi)中的图像抓取。
一、从摄像头获取初始化:
CvCapture* capture = cvCaptureFromCAM(0); // capture from video device #0
从视频文件filename.avi获取初始化:CvCapture* capture = cvCaptureFromAVI("infile.avi");
抓取帧:IplImage* img = 0; if(!cvGrabFrame(capture)){ // 抓取一帧,失败退出 printf("Could not grab a frame\n");exit(0);}img=cvRetrieveFrame(capture); // 恢复获取的帧图像
要从多个摄像头同时获取图像, 首先从每个摄像头抓取一帧. 在抓取动作都结束后再恢复帧图像.释放抓取源(和释放单幅图像时类似):
cvReleaseCapture(&capture);
注意由设备抓取的图像是由capture函数自动分配和释放的. 不要试图自己释放它.获取设备特性:
cvQueryFrame(capture); // this call is necessary to get correct // capture propertiesint frameH = (int) cvGetCaptureProperty(capture, CV_CAP_PROP_FRAME_HEIGHT);int frameW = (int) cvGetCaptureProperty(capture, CV_CAP_PROP_FRAME_WIDTH);int fps = (int) cvGetCaptureProperty(capture, CV_CAP_PROP_FPS);int numFrames = (int) cvGetCaptureProperty(capture, CV_CAP_PROP_FRAME_COUNT);
所有帧数似乎只与视频文件有关. 用摄像头时不对,奇怪!!!.获取帧信息:
float posMsec = cvGetCaptureProperty(capture, CV_CAP_PROP_POS_MSEC);int posFrames = (int) cvGetCaptureProperty(capture, CV_CAP_PROP_POS_FRAMES);float posRatio = cvGetCaptureProperty(capture, CV_CAP_PROP_POS_AVI_RATIO);
获取所抓取帧在视频序列中的位置, 从首帧开始按[毫秒]算. 或者从首帧开始从0标号, 获取所抓取帧的标号. 或者取相对位置,首帧为0,末帧为1, 只对视频文件有效。设定所抓取的第一帧标号:// 从视频文件相对位置0.9处开始抓取cvSetCaptureProperty(capture, CV_CAP_PROP_POS_AVI_RATIO, (double)0.9);
只对从视频文件抓取有效. 不过似乎也不成功!!! 二、初始化视频存储器:
CvVideoWriter *writer = 0;int isColor = 1;int fps = 25; // or 30int frameW = 640; // 744 for firewire camerasint frameH = 480; // 480 for firewire cameraswriter=cvCreateVideoWriter("out.avi",CV_FOURCC('P','I','M','1'),fps,cvSize(frameW,frameH),isColor);
其他有效编码:CV_FOURCC('P','I','M','1') = MPEG-1 codecCV_FOURCC('M','J','P','G') = motion-jpeg codec (does not work well)CV_FOURCC('M', 'P', '4', '2') = MPEG-4.2 codecCV_FOURCC('D', 'I', 'V', '3') = MPEG-4.3 codecCV_FOURCC('D', 'I', 'V', 'X') = MPEG-4 codecCV_FOURCC('U', '2', '6', '3') = H263 codecCV_FOURCC('I', '2', '6', '3') = H263I codecCV_FOURCC('F', 'L', 'V', '1') = FLV1 codec
若把视频编码设为-1则将打开一个编码选择窗口(windows系统下).存储视频文件:
IplImage* img = 0; int nFrames = 50;for(i=0;i<nFrames;i++){cvGrabFrame(capture); // 抓取帧img = cvRetrieveFrame(capture); // 恢复图像cvWriteFrame(writer,img); // 将帧添加入视频文件}
若想在抓取中查看抓取图像, 可在循环中加入下列代码:cvShowImage("mainWin", img); key = cvWaitKey(20); // wait 20 ms
若没有20[毫秒]延迟,将无法正确显示视频序列.释放视频存储器:
cvReleaseVideoWriter(&writer);
三、示例1:从视频中抓取每一帧,显示并保存
#include <cstring>#include <opencv2/opencv.hpp>#include <opencv2/highgui.hpp>using namespace std;int main(){CvCapture* capture;capture = cvCreateFileCapture("bike.avi");assert(capture!=NULL);IplImage *frame;cvNamedWindow("camera",1);int n = 1, m = 120;char* cstr = new char[120];while (m--){frame = cvQueryFrame(capture);if (!frame) break;sprintf(cstr, "%s%d%s", "D:\\OpenCVWorkSpace\\video_capture\\video_capture",n++,".jpg");cvShowImage("camera",frame);cvSaveImage(cstr, frame);if (cvWaitKey(330)>=0) break;}cvReleaseCapture(&capture);cvReleaseImage(&frame);cvDestroyWindow("camera");return 0;}
四、示例2:从摄像头中提取图片后并将图片重新连续播放出来。
// 该程序实现视频和图片的相互转换. // Image_to_video()函数将一组图片合成AVI视频文件. // Video_to_image()函数将AVI视频文件读入,将每一帧存储为jpg文件. // //////////////////////////////////////////////////////////////////////// #include <stdlib.h> #include <stdio.h> #include <math.h> #include <cv.h> #include <highgui.h> #define NUM_FRAME 300 //只处理前300帧,根据视频帧数可修改 void Video_to_image(char* filename){printf("------------- video to image ... ----------------n");//初始化一个视频文件捕捉器 CvCapture* capture = cvCaptureFromAVI(filename);//获取视频信息 cvQueryFrame(capture);int frameH = (int)cvGetCaptureProperty(capture, CV_CAP_PROP_FRAME_HEIGHT);int frameW = (int)cvGetCaptureProperty(capture, CV_CAP_PROP_FRAME_WIDTH);int fps = (int)cvGetCaptureProperty(capture, CV_CAP_PROP_FPS);int numFrames = (int)cvGetCaptureProperty(capture, CV_CAP_PROP_FRAME_COUNT);printf("tvideo height : %dntvideo width : %dntfps : %dntframe numbers : %dn", frameH, frameW, fps, numFrames);//定义和初始化变量 int i = 0;IplImage* img = 0;char image_name[13];cvNamedWindow("mainWin", CV_WINDOW_AUTOSIZE);//读取和显示 while (1){img = cvQueryFrame(capture); //获取一帧图片 cvShowImage("mainWin", img); //将其显示 char key = cvWaitKey(20);sprintf(image_name, "%s%d%s", "image", ++i, ".jpg");//保存的图片名 cvSaveImage(image_name, img); //保存一帧图片 if (i == NUM_FRAME) break;}cvReleaseCapture(&capture);cvDestroyWindow("mainWin");}void Image_to_video(){int i = 0;IplImage* img = 0;char image_name[13];printf("------------- image to video ... ----------------n");//初始化视频编写器,参数根据实际视频文件修改 CvVideoWriter *writer = 0;int isColor = 1;int fps = 30; // or 25 int frameW = 400; // 744 for firewire cameras int frameH = 240; // 480 for firewire cameras writer = cvCreateVideoWriter("out.avi", CV_FOURCC('X', 'V', 'I', 'D'), fps, cvSize(frameW, frameH), isColor);printf("tvideo height : %dntvideo width : %dntfps : %dn", frameH, frameW, fps);//创建窗口 cvNamedWindow("mainWin", CV_WINDOW_AUTOSIZE);while (i < NUM_FRAME){sprintf(image_name, "%s%d%s", "image", ++i, ".jpg");img = cvLoadImage(image_name);if (!img){printf("Could not load image file...n");exit(0);}cvShowImage("mainWin", img);char key = cvWaitKey(20);cvWriteFrame(writer, img);}cvReleaseVideoWriter(&writer);cvDestroyWindow("mainWin");}int main(int argc, char *argv[]){char filename[13] = "bike.avi";Video_to_image(filename); //视频转图片 Image_to_video(); //图片转视频 return 0;}
五、示例3:从摄像头中提取图片,显示并保存。
由于本人不帅,所以这个程序就不贴效果图了,具体的效果自己贴到程序中测试,可以自我欣赏一下。
注意:
//////////////调用摄像头/////////////////
videoCapture cam;
cam.open(0);
/////////////设置摄像头窗口大小///////////////////
cam.set(CV_CAP_PROP_FRAM_WIDTH,600);
cam.set(CV_CAP_PROP_FRAM_HEIGHT,400);
/////////////获取摄像头视频中的每一帧///////////////////
cv::Mat cameraFrame;
camera>>cameraFrame;
//////////////存储从视频中获取的每一帧——存储路径与存储名称/////////////////
char* cstr = new char[120];
sprintf(cstr, "%s%d%s", "D:\\OpenCVWorkSpace\\video_capture\\video_capture",n++,".jpg");
///////////////openCV3.1.0中图片存储函数/////////////
imwrite(cstr,cameraFrame);//这个函数很重要,与cvSaveImage()这个函数不同,存储的图片类型是cv::Mat类型的,所以要注意
#include <cstring> #include <opencv2/opencv.hpp> #include <opencv2/highgui.hpp> #include <opencv2/video.hpp> #include "opencv2/imgproc/imgproc.hpp" #include "opencv2/ml/ml.hpp" using namespace std;using namespace cv;#include "opencv2/imgproc/imgproc.hpp" #include "opencv2/ml/ml.hpp" using namespace std;using namespace cv;int main(int argc, char *argv[]){int cameraNumber = 0;if (argc > 1)cameraNumber = atoi(argv[1]);VideoCapture camera;camera.open(cameraNumber);camera.set(CV_CAP_PROP_FRAME_WIDTH, 600);//设置界面大小 camera.set(CV_CAP_PROP_FRAME_HEIGHT, 400);if (!camera.isOpened()){cerr << "ERROPR" << endl;exit(1);}int n = 1;while (true){Mat cameraFrame;camera >> cameraFrame;if (cameraFrame.empty()){cerr << "ERROR1" << endl;exit(1);} char* cstr = new char[120]; sprintf(cstr, "%s%d%s", "D:\\OpenCVWorkSpace\\video_capture\\video_capture",n++,".jpg");imshow("Video", cameraFrame); //const CvArr* s = (CvArr*)&cameraFrame; imwrite(cstr,cameraFrame);//这个函数很重要,与cvSaveImage()这个函数不同,存储的图片类型是cv::Mat类型的,所以要注意char key = cv::waitKey(50);if (key == 33){break;}}}
运行效果图略。
注意:在开启摄像头时,上面的程序不会出错,但是在调用视频的时候,视频结束时会有下述的错误:
OpenCV Error: Assertion failed (size.width>0 && size.height>0) in cv::imshow, file..\..\..\..\opencv\modules\highgui\src\window.cpp, line 261
这时就要注意,imread函数最好是放在if判断语句里面:
网上的说法:
我们用opencv打开视频的时候,会自动先监测摄像头有没有读到帧,如果没有,就会报错,然后再执行你的程序,加一个if判断就是跳过系统自己的判断,直接执行我们的程序。加上后确实可以解决错误。
if (!img_src1.empty()){imshow("Froeground", img_src1);}else{return 0;}
- 《OpenCV》Part4 OpenCV3.1.0 提取视频中的每一帧
- opencv提取视频每一帧
- 提取视频每一帧
- OpenCV提取视频中的每一帧sobel化保存到本地
- OpenCV提取视频中的每一帧sobel化保存到本地
- opencv 读取视频中的每一帧
- opencv提取视频每一帧图片及图片转换为视频
- OpenCV 实践程序16——提取视频每一帧及用多张图片合成视频
- 如何从视频中提取每一帧图像
- opencv中读取视频每一帧并且单独保存
- Opencv之存储并标记视频每一帧
- OpenCV之从视频获取每一帧图像
- opencv之抓取视频每一帧并保存
- opencv把视频的每一帧保存为图片
- 使用opencv:从视频中获取每一帧图片
- python 提取gif动态图像中的每一帧
- 【OpenCV】提取视频中指定帧
- opencv基本操作-视频帧提取
- 用控制台窗口查看调试信息
- Spark MLLib从入门实战小例子
- SQL Server Express连接字符串
- mysql 有权限,不能增删改 SET SQL_SAFE_UPDATES=0;
- WebService到底是什么?
- 《OpenCV》Part4 OpenCV3.1.0 提取视频中的每一帧
- 一个DWORD类型存储多种数据
- Python语言学习讲解四:常见的几个坑
- 新的起点,从C基础开始(一)
- html5解决大文件断点续传
- /etc/profile 简介
- 【jmeter测试--自带录制脚本功能】
- 使用winform中的fileSystemWater与EMGU结合实现文件监控和字母识别
- Matlab Robotic Toolbox V9.10工具箱(七):Stanford arm 动力学建模与仿真