vpp命令总结

create sub BondEthernet0 834创建子接口，tag是834set interface ip table BondEthernet0.834 1将此接口设置在fib 1里set interface ip address BondEthernet0.834 192.168.0.250/24设置接口ipset interface state  BondEthernet0.834 up up接口set interface l2 bridge BondEthernet0.834 834将此接口设置到bridge 834里.................................................................................................set ip arp GigabitEthernet2/6/0 192.168.2.2 00:0c:29:dc:96:f8 设置静态arpip route add 1.2.3.0/24 via GigabitEthernet2/6/0添加路由create vhost socket /tmp/sock2.sock server创建vhost接口l2fib add  fa:16:3e:b0:a9:71 834  BondEthernet0.834 添加二层转发流表create host-interface name vpp5a

创建veth口，name后参数名字必须

和linux里创建的veth口名字对应

set dpdk interface descriptors  TenGigabitEthernet6/0/0 tx/rx 1024
设置此接口rx或是tx队列大小，intel人
说2000-4000差距不大

 set interface handoff <interface-name> workers <workers-list> [symmetrical|asymmetrical]  

 

trace add dpdk-input 8跟踪dpdk接口数据包 （dpdk-input是节点的名字，想跟踪任何节点都可以）trace add vhost-user-input 8跟踪vhost接口数据包trace add af-packet-input 8跟踪veth接口数据包 















show hardware-interfaces查看接口macshow vlib graph 查看node逻辑图show threads    查看vpp线程show l2fib查看二层转发流表show ip fib查看路由表show ip arp查看arpshow affinity    查看主线程cpu亲和性show version   查看vpp版本show int查看接口统计show interfaces address查看接口ipshow bridge-domain查看bridge 接口情况