NanoPi2- SD使用
来源:互联网 发布:c语言strtok函数例子 编辑:程序博客网 时间:2024/06/08 18:45
root@NanoPi2:~# fdisk -l
Disk /dev/mmcblk0: 14.9 GiB, 15931539456 bytes, 31116288 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000
Device Boot Start End Sectors Size Id Type
/dev/mmcblk0p1 2048 133119 131072 64M 83 Linux
/dev/mmcblk0p2 133120 7617185 7484066 3.6G 83 Linux
Disk /dev/mmcblk1: 1.9 GiB, 2013265920 bytes, 3932160 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x1ea9909d
Device Boot Start End Sectors Size Id Type
/dev/mmcblk1p1 * 12281 3932159 3919879 1.9G e W95 FAT16 (LBA)
/dev/mmcblk1p2 4 5457 5454 2.7M 53 OnTrack DM6 Aux3
/dev/mmcblk1p3 8185 10232 2048 1M 1 FAT12
/dev/mmcblk1p4 10233 12280 2048 1M 1 FAT12
Partition table entries are not in disk order.
root@NanoPi2:~# mount -t vfat /dev/mmcblk1p1 /mnt
root@NanoPi2:~# ls /mnt
Disk /dev/mmcblk0: 14.9 GiB, 15931539456 bytes, 31116288 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000
Device Boot Start End Sectors Size Id Type
/dev/mmcblk0p1 2048 133119 131072 64M 83 Linux
/dev/mmcblk0p2 133120 7617185 7484066 3.6G 83 Linux
Disk /dev/mmcblk1: 1.9 GiB, 2013265920 bytes, 3932160 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x1ea9909d
Device Boot Start End Sectors Size Id Type
/dev/mmcblk1p1 * 12281 3932159 3919879 1.9G e W95 FAT16 (LBA)
/dev/mmcblk1p2 4 5457 5454 2.7M 53 OnTrack DM6 Aux3
/dev/mmcblk1p3 8185 10232 2048 1M 1 FAT12
/dev/mmcblk1p4 10233 12280 2048 1M 1 FAT12
Partition table entries are not in disk order.
root@NanoPi2:~# mount -t vfat /dev/mmcblk1p1 /mnt
root@NanoPi2:~# ls /mnt
SampleCode System Volume Information
参考
http://blog.csdn.net/linux_xiaomugua/article/details/6974250
参考
http://bbs.elecfans.com/jishu_535606_1_1.html
0 0
- NanoPi2- SD使用
- 【NanoPi2试用体验】扩容SD卡,利用gparted将剩余空间利用起来
- nanopi2学习
- 【NanoPi2试用体验】eclipse使用的官方提供的交叉编译器
- nanopi2使用mtraix蜂鸣器驱动加载时出现的内核不匹配问题
- nanopi2屏幕点亮
- nanopi2 TCP环境搭建
- nanopi2 启动信息
- nanopi2配置流程
- Nanopi2 GPIO学习心得
- nanopi2-触摸屏-I2C Note
- Nanopi2 挂载U盘
- Android 使用SD卡
- 【android】 使用sd卡
- 使用SD卡启动
- SD卡的使用
- 【NanoPi2试用体验】nanopi2下的二维码识别
- 【NanoPi2试用体验】编译系统
- linux 增加用户(default)并修改密码
- ANR分析
- Talloc内存池使用教程——(4)使用析构函数
- JavaSE_网络编程_URL类
- php __FILE__ __DIR__魔术常量的使用【PHP进阶教程】
- NanoPi2- SD使用
- 第一章—无线传感网的技术概述
- 如何搭建个人网站(一)
- HDU 5072 coprime (同色三角形 + 容斥)
- Win 10解决 你需要来自system的权限问题
- 使用 Jmeter 做 Web 接口测试
- 我的vue与react实践对比
- JDBC与数据库的连接问题
- A new start for me