Win10 VS2013编译Boost 1.62.0
来源:互联网 发布:lols7鳄鱼技能数据 编辑:程序博客网 时间:2024/05/17 03:55
环境:
Windows 10, 64bit;Visual Studio 2013(Update 5);Boost 1.62.0
过程:
1,下载Boost 1.62.0.zip
2, 解压Boost到D:\Mylaf\Rebuild\VS2013下面
3,以管理员身份打开CMD,并切换到D:\Mylaf\Rebuild\VS2013\boost_1_62_0,进行如下操作:
3.1 执行.\bootstrap.bat生成bjam.exe,b2.exe。(b2.exe是bjam.exe的升级版本)
3.2 使用b2.exe进行编译
静态库:.\b2.exe --stagedir="D:\Mylaf\Config\boost_1_62_0" --build-type=complete --without-python --without-mpi --without-metaparse --without-graph --without-graph_parallel --without-program_options --without-wave --witout-type_erasure --without-coroutine --without-coroutine2 toolset=msvc-12.0 link=shared runtime-link=shared threading=multi动态库:.\b2.exe --stagedir="D:\Mylaf\Config\boost_1_62_0" --build-type=complete --without-python --without-mpi --without-metaparse --without-graph --without-graph_parallel --without-program_options --without-wave --witout-type_erasure --without-coroutine --without-coroutine2 toolset=msvc-12.0 link=static runtime-link=static threading=multi
3.3 使用b2.exe进行编译
...updated 1003 targets...The Boost C++ Libraries were successfully built!The following directory should be added to compiler include paths: D:\Mylaf\Rebuild\VS2013\boost_1_62_0The following directory should be added to linker library paths: D:\Mylaf\Rebuild\VS2013\boost_1_62_0\D:\Mylaf\Config\boost_1_62_0\libD:\Mylaf\Rebuild\VS2013\boost_1_62_0>
附上:b2.exe的参数说明:
D:\Rebuild\boost_1_62_0>b2.exe --helpBoost.Build 2015.07-gitProject-specific help: Project has jamfile at JamrootUsage: b2 [options] [properties] [install|stage] Builds and installs Boost.Targets and Related Options: install Install headers and compiled library files to the ======= configured locations (below). --prefix=<PREFIX> Install architecture independent files here. Default; C:\Boost on Win32 Default; /usr/local on Unix. Linux, etc. --exec-prefix=<EPREFIX> Install architecture dependent files here. Default; <PREFIX> --libdir=<DIR> Install library files here. Default; <EPREFIX>/lib --includedir=<HDRDIR> Install header files here. Default; <PREFIX>/include stage Build and install only compiled library files to the ===== stage directory. --stagedir=<STAGEDIR> Install library files here Default; ./stageOther Options: --build-type=<type> Build the specified pre-defined set of variations of the libraries. Note, that which variants get built depends on what each library supports. -- minimal -- (default) Builds a minimal set of variants. On Windows, these are static multithreaded libraries in debug and release modes, using shared runtime. On Linux, these are static and shared multithreaded libraries in release mode. -- complete -- Build all possible variations. --build-dir=DIR Build in this location instead of building within the distribution tree. Recommended! --show-libraries Display the list of Boost libraries that require build and installation steps, and then exit. --layout=<layout> Determine whether to choose library names and header locations such that multiple versions of Boost or multiple compilers can be used on the same system. -- versioned -- Names of boost binaries include the Boost version number, name and version of the compiler and encoded build properties. Boost headers are installed in a subdirectory of <HDRDIR> whose name contains the Boost version number. -- tagged -- Names of boost binaries include the encoded build properties such as variant and threading, but do not including compiler name and version, or Boost version. This option is useful if you build several variants of Boost, using the same compiler. -- system -- Binaries names do not include the Boost version number or the name and version number of the compiler. Boost headers are installed directly into <HDRDIR>. This option is intended for system integrators building distribution packages. The default value is 'versioned' on Windows, and 'system' on Unix. --buildid=ID Add the specified ID to the name of built libraries. The default is to not add anything. --python-buildid=ID Add the specified ID to the name of built libraries that depend on Python. The default is to not add anything. This ID is added in addition to --buildid. --help This message. --with-<library> Build and install the specified <library>. If this option is used, only libraries specified using this option will be built. --without-<library> Do not build, stage, or install the specified <library>. By default, all libraries are built.Properties: toolset=toolset Indicate the toolset to build with. variant=debug|release Select the build variant link=static|shared Whether to build static or shared libraries threading=single|multi Whether to build single or multithreaded binaries runtime-link=static|shared Whether to link to static or shared C and C++ runtime.General command line usage: b2 [options] [properties] [targets] Options, properties and targets can be specified in any order.Important Options: * --clean Remove targets instead of building * -a Rebuild everything * -n Don't execute the commands, only print them * -d+2 Show commands as they are executed * -d0 Suppress all informational messages * -q Stop at first error * --reconfigure Rerun all configuration checks * --debug-configuration Diagnose configuration * --debug-building Report which targets are built with what properties * --debug-generator Diagnose generator search/executionFurther Help: The following options can be used to obtain additional documentation. * --help-options Print more obscure command line options. * --help-internal Boost.Build implementation details. * --help-doc-options Implementation details doc formatting....found 1 target...D:\Rebuild\boost_1_62_0>
1 0
- Win10 VS2013编译Boost 1.62.0
- Boost编译和配置教程(Win10+VS2013+Boost1.60.0)
- win10 vs2013 编译 x265
- vs2013编译boost库
- vs2013编译boost库
- VS2013编译boost
- Boost库安装-win10+VS2013+boost_1.60.0
- Win10+VS2013编译OSG3.4
- Win10+vs2013+x265源代码编译
- vs2013 boost库编译小结
- vs2013 boost库编译小结
- vs2013 boost库编译小结
- VS2013编译boost 1.62:.\boost/type_traits/common_types.h(42) : fatal error C1001: 编译发生内部错误
- win10,VS2013下MXnet编译和安装
- VS2013+WIN10 X64 编译32位libavg
- 编译Boost 详细步骤 适用 VS2013
- vs2013编译boost及相关的配置
- VS2013 Qt5.4 编译安装Boost库
- Rime协议学习笔记:(十)polite广播
- 手把手教你在Photoshop中使用色阶工具
- mysql5.7绿色版安装--windows
- 枚举学习
- PCL同时在一个窗口中显示两个(多个)点云
- Win10 VS2013编译Boost 1.62.0
- UIImagePickerController
- JSP三大指令
- 手把手教你Photoshop蒙版的使用(一)
- uFrame MVVM 1.6 自学路线
- JavaScript Dom详解总结
- SLR-智能交通道路最优化分配
- 3D文件压缩库——Draco简析
- jinjia2模板编程