week4、run 4 automation test cases of bright

使用Robot自动化测试框架进行测试

连接自己创建的simulator仿真平台，输入端口号

对老版本执行：

SEMANTIC-0001

 

ztang>show interface 1/1/x3

                                              Curr.  # VLANS/

Name      Description              Role       Rate  Tag Act. Status

---------- ---------------------------------- ------ -------- ---------------

1/1/x3                              trunk      0     1/0      system disabled

ztang>set interface 1/1/x3 role edge

success: Modify interface"1/1/x3".

ztang>create eth-mirror dest-eth-port1/1/x3

success: Create Ethernet mirror.

ztang>delete eth-mirror

success: Delete Ethernet mirror.

ztang>set interface 1/1/x3 role trunk

success: Modify interface"1/1/x3".

 

 

SEMANTIC-0002

ztang>create eth-mirror dest-eth-port1/1/x3

success: Create Ethernet mirror.

ztang>set interface 1/1/x3 role edge

success: Modify interface"1/1/x3".

ztang>set interface 1/1/x3 role trunk

success: Modify interface"1/1/x3".

ztang>delete eth-mirror

success: Delete Ethernet mirror.

 

SEMANTIC-0003

ztang>create vlan 11

success: Create VLAN 11.

ztang>add interface 1/1/x3 to-vlan 11

success: Add VLAN 11 member -- interface"1/1/x3".

ztang>create eth-mirror dest-eth-port1/1/x3

success: Create Ethernet mirror.

ztang>delete eth-mirror

success: Delete Ethernet mirror.

ztang>remove interface 1/1/x3 from-vlan11

success: Remove VLAN 11 member -- interface"1/1/x3".

ztang>delete vlan 11

success: Delete VLAN 11.

 

SEMANTIC-0004

ztang>create vlan 11

success: Create VLAN 11.

ztang>create eth-mirror dest-eth-port1/1/x3

success: Create Ethernet mirror.

ztang>add interface 1/1/x3 to-vlan 11

success: Add VLAN 11 member -- interface"1/1/x3".

ztang>remove interface 1/1/x3 from-vlan11

success: Remove VLAN 11 member -- interface"1/1/x3".

ztang>delete eth-mirror

success: Delete Ethernet mirror.

ztang>delete vlan 11

success: Delete VLAN 11.

更新 新功能后：

SEMANTIC-0001

 

CalixE7>set interface 1/1/x3 role edge

success: Modify interface "1/1/x3".

CalixE7>create eth-mirror dest-eth-port 1/1/x3

failed: dest-eth-port is in an edge port.

CalixE7>set interface 1/1/x3role trunk

success: Modify interface "1/1/x3".

 

SEMANTIC-0002

CalixE7>create eth-mirror dest-eth-port a/x3                                                                                                                                             

success: Create Ethernet mirror.

CalixE7>set interface a/x3 role edge

failed: the port is used as eth-mirror dest-eth-port.

CalixE7>delete eth-mirror

success: Delete Ethernet mirror.

 

 

SEMANTIC-0003

CalixE7>create vlan 11

success: Create VLAN 11.

CalixE7>add interface a/x2 to-vlan 11

success: Add VLAN 11 member -- interface "1/1/x3".

CalixE7>create eth-mirror dest-eth-port 1/1/x3

failed: dest-eth-port is a member of a vlan.

CalixE7>remove interface 1/1/x3 from-vlan 11

success: Remove VLAN 11 member -- interface"1/1/x3".

CalixE7>delete vlan 11

success: Delete VLAN 11.

 

SEMANTIC-0004

CalixE7>create vlan 11

success: Create VLAN 11.

CalixE7>createeth-mirror dest-eth-port 1/1/x3                                                                                                                                             

success: Create Ethernet mirror.

CalixE7>add interface 1/1/x3 to-vlan 11

failed: Eth Port is a member of eth-mirror.

CalixE7>delete eth-mirror

success: Delete Ethernet mirror.

CalixE7>delete vlan 11

success: Delete VLAN 11.

写测试用例时：

注意  执行测试用例后的状态要与测试前的状态一致。即恢复初始状态，可以使用正则表达式进行变量存储。  show  {a}  , 最后 set  a