4.4开关机动画，切换指令修改参考

来源：互联网发布：单片机高阻输入编辑：程序博客网时间：2024/05/16 01:13

添加开机关机动画
涉及文件：
一：动画和铃声
   //开关机动画和铃声位置
   mediatek/BootAnimation
   //如果是新添加的要在此文件下添加
   mediatek/BootAnimation/logoCopy.mk //添加拷贝
   //修改位置
   frameworks/base/cmds/bootanimation/BootAnimation.cpp

   //图片位置 ----在对应的位置放入第二帧图片
   mediatek/config/lcsh72_we_jb3/ProjectConfig.mk中查找LOGO 找到BOOT_LOGO=cu_qhd   =后面的就是目标文件夹

eg：mediatek/custom/common/lk/logo/cu_qhd

    //如果添加新的第二帧图片，在此文件中注册
   mediatek/custom/common/lk/logo/rules.mk
   mediatek/custom/common/lk/logo/update

   //第一帧动画修改位置
   mediatek/platform/mt6572/lk/rules.mk
   mediatek/platform/mt6572/lk/mt_logo.c
   在函数 void mt_disp_show_boot_logo(void)中
   if ( logo_id == 0x31 || logo_id == 0x00)
        {
           fill_animation_logo(39/*该数字为对应第一帧图片编号 39为UI 1*/, mt_get_fb_addr(), (void *)mt_get_tempfb_addr(), logo_addr, phical_screen);
        }

   编译后可将需要的动画和铃声拷贝到out/target/product/lcsh82_wet_jb5/system/media/   --查看

二：切换指令的修改：

   packages/apps/Dialer/src/com/mediatek/dialer/SpecialCharSequenceMgrProxy.java

       a).在onReceive()方法中更改切换指令，对应用户Log和切换Log
eg：           if(input.equals("*#*#18020#*#*")){// 客户ID
               int logoErrCode = ProjectManager.writeLogoId(0);
               if ( logoErrCode == 0 )
               {
                   int userErrCode = ProjectManager.writeUserId(1);
                   DisplayResult(context, userErrCode);
                   saveCurrentSwitchLogIdFile(0);
               }
               else
               {
                   Log.e(TAG,"sw260_Dial write logo id fail");
                   DisplayResult(context, logoErrCode);
               }
               switched = true;
           }

            if(input.equals("*#*#0000#*#*")){       //log ID
               int logo_id = 0;
               if ( !checkLogoSwitch(logo_id) )
               {
                   Log.e(TAG,"sw260_Dial check logo fail");
                   Toast.makeText(context, "fail", 1000).show();
                   return true;
               }

               int errCode = ProjectManager.writeLogoId(logo_id);
               DisplayResult(context, errCode);
               switched = true;
               Settings.System.putInt(mContext.getContentResolver(),Settings.System.SETTINGS_SYSTEM_TIME_ZONE, 0);
                  forceChangeUserLocale(new Locale("en", "US"));
               Intent intent = new Intent();
               ComponentName componentName = new ComponentName("com.example.reboot","com.example.reboot.MainActivity");
               intent.setComponent(componentName);
               mContext.startActivity(intent);
       }

    b).在 checkLogoSwitch(int logo_num)方法中更改对应的用户Log可以切换的Log
           case 1:   //对应客户ID
               case 1:
               if(logo_num == 1){//将对应的logID 写在里面
                   result = true;
               }
               break;

修改蓝牙，型号名称：
涉及文件
1、frameworks/base/core/java/android/os/ProjectManager.java
       //获取蓝牙名称
       public static String getBlueToothName()
       {
           String bluename2 = null;

           if(isUi1()){
               bluename2 = "Lovme-X55";
           }else{
               bluename2 = "DW-E62";
           }

           return bluename2;
       }

2、frameworks/base/core/java/android/bluetooth/BluetoothAdapter.java
   1、在 public String getName()方法中添加对应的蓝牙名称
       public String getName() {
            try {
               Log.d("getName()", "persist.sys.story_bluetooth" + android.os.SystemProperties.getInt
                   ("persist.sys.story_bluetooth", 0));
               if(android.os.SystemProperties.getInt("persist.sys.story_bluetooth", 0) == 0){

                   if("ANDROID BT".equals(mService.getName())
                       || "X55".equals(mService.getName())
                       || "Galaxy Note3".equals(mService.getName())
                       || "SM-N9000".equals(mService.getName())
                       || "SM-N900".equals(mService.getName())
                       || "Android-BT".equals(mService.getName())
                       || "DW-E62".equals(mService.getName())

                       ){

                        if(!android.os.ProjectManager.getBlueToothName().equals(mService.getName())){
                           setCurLogoBTName(android.os.ProjectManager.getBlueToothName());

                       }
                       return android.os.ProjectManager.getBlueToothName();
                   } else {

                       return mService.getName();
                   }
               }else {

                   return mService.getName();
               }
            } catch (RemoteException e) {Log.e(TAG, "", e);}
            return null;
      }

修改wifi热点名称
涉及文件
1、frameworks/base/core/java/android/os/ProjectManager.java
       //获取wifi名称
       public static String getWifiName()
       {
           String name = null;
           if(isUi1()){
               name = "Lovme-X55";
           }else{
               name = "DW-E62";
           }
           return name;
       }
2、frameworks/base/wifi/java/android/net/wifi/WifiConfiguration.java
   a)、导入import android.os.ProjectManager;包
   b)、在 public static final Creator<WifiConfiguration> CREATOR =new Creator<WifiConfiguration>() 方法中修改
          //zbg130917修改热点名称
            if((config.SSID != null) && (config.SSID.equals("AndroidAP"))){
               config.SSID = ProjectManager.getWifiName();
            }

修改wifi本地名称
在frameworks/base/wifi/java/android/net/wifi/p2p/WifiP2pService.java文件中
   getPersistedDeviceName()方法中当deviceName == null时设置默认值
   private String getPersistedDeviceName() {
        String deviceName = Settings.Global.getString(mContext.getContentResolver(),
                Settings.Global.WIFI_P2P_DEVICE_NAME);
        if (deviceName == null) {
            /* We use the 4 digits of the ANDROID_ID to have a friendly
             * default that has low likelihood of collision with a peer */
            String id = Settings.Secure.getString(mContext.getContentResolver(),
                    Settings.Secure.ANDROID_ID);
            //return "Android_" + id.substring(0,4);
           return ProjectManager.getWifiName();
        }
        return deviceName;
    }

修改wifi热点名称
在frameworks/base/wifi/java/android/net/wifi/p2p/WifiP2pService.java文件中
   getPersistedDeviceName（）方法中

   private String getPersistedDeviceName() {
        String deviceName = Settings.Global.getString(mContext.getContentResolver(),
                Settings.Global.WIFI_P2P_DEVICE_NAME);
        if (deviceName == null) {
            /* We use the 4 digits of the ANDROID_ID to have a friendly
             * default that has low likelihood of collision with a peer */
            String id = Settings.Secure.getString(mContext.getContentResolver(),
                    Settings.Secure.ANDROID_ID);
            //return "Android_" + id.substring(0,4);
           return ProjectManager.getWifiName();
        }
        return deviceName;
    }

更改默认网址
packages/apps/Browser/res/values/strings.xml     中添加要修改的网址
packages/apps/Browser/src/com/android/browser/BrowserSettings.java
   1、在private Runnable mSetup = new Runnable()方法中下面位置修改对应UI对应的默认网址
                if(FeatureOption.CUSTOM_FOREIGEN_LANGUAGE){
                   if(ProjectManager.isUi4()){
                       sFactoryResetUrl = mContext.getResources().getString(R.string.homepage_base_gtide);
                   }else{
                       sFactoryResetUrl = mContext.getResources().getString(R.string.homepage_base_en);
                       }
               }

//连接电脑端机型：
system/core/libcutils/properties.c
在property_get(函数中
if(key){
       if(!strcmp(key,"ro.product.brand") || !strcmp(key,"ro.product.model")){
           char *logoFlagFile = "/proc/logo_id";
           int fd = open(logoFlagFile, O_RDONLY);
           if(fd > 0){
               char buf[20]= {0};
               int count = read(fd, buf, sizeof(buf));
               char *modeValue;
               if(count > 0){
                   if(!strcmp(key,"ro.product.brand")){
                       if(!strncmp(buf, "48"/*数字为logid编号，48未UI0*/, 2)){
                           modeValue = "Android";
                       }else{
                           modeValue = "SK2";
                       }
                   }else{
                       if(!strncmp(buf, "48", 2)){
                           modeValue = "Android";
                       }else{
                           modeValue = "SK2";
                       }

                   }

                   len = strlen(modeValue);
                   //int tmplen = strlen(buf);

                   //ALOGI("property_get modeValue :%s tmplen :%d \n", modeValue, tmplen);
                   memcpy(value, modeValue, len + 1);

                   close(fd);
                   return len;
               }
               close(fd);
           }
       }
//更改是否显示关机动画
frameworks/base/services/java/com/android/server/power/ShutdownThread.java
中通过控制 mShutOffAnimation 变量来控制动画
synchronized (mEnableAnimatingSync) {
           if(ProjectManager.isAndroid() || ProjectManager.isUi3()){ ///更改处---控制变量
               mShutOffAnimation = true;
           }else{
               mShutOffAnimation = false;
           }

            if(!mEnableAnimating) {
//                sInstance.mPowerManager.setBacklightBrightness(PowerManager.BRIGHTNESS_DIM);

} else {
                if (mShutOffAnimation) {
                    Log.e(TAG, "mIBootAnim.isCustBootAnim() is true");
                    bootanimCust();
                } else {
               //显示关机弹出框

                    pd = new ProgressDialog(context);
                    pd.setTitle(context.getText(com.android.internal.R.string.power_off));
                    pd.setMessage(context.getText(com.android.internal.R.string.shutdown_progress));
                    pd.setIndeterminate(true);
                    pd.setCancelable(false);
                    pd.getWindow().setType(WindowManager.LayoutParams.TYPE_KEYGUARD_DIALOG);
                    /* To fix video+UI+blur flick issue */
                    pd.getWindow().addFlags(WindowManager.LayoutParams.FLAG_DIM_BEHIND);
                    pd.show();
                }
                sInstance.mPowerManager.setShutDown(true);
                sInstance.mHandler.postDelayed(mDelayDim, screenTurnOffTime);
            }
        }

0 0