unit 11
来源:互联网 发布:富其软件用法 编辑:程序博客网 时间:2024/04/28 12:42
###################
####11.管理网络####
###################
####1.ip基础知识####
1.ipv4
2进制32位-----10进制
172.25.0.10/255.255.255.0
172.25.0.10:ip地址
255.255.255.0:子网掩码
子网掩码255位对应的ip位为网络位
子网掩码0对应的ip位为主机位
####2.配置ip####
<<图形化>>
1.图形界面
nm-connection-editor
2.文本化图形
nmtui
<<命令>>
ifconfig 网卡 ip netmask ##临时设定
nmcli connection add type ethernet con-name westos ifname eth0 autoconnect yes
nmcli connection add type ethernet con-name westos ifname eth0 ip4 ip/24
nmcli connection delete westos
nmcli connection show
nmcli connection down westos
nmcli connection up westos
nmcli connection modify "westos" ipv4.addresses newip/24
nmcli connection modify "westos" ipv4.method <auto|manual>
nmcli device connect eth0
nmcli device disconnect eth0
nmcli device show
nmcli device status
<<文件>>
dhcp ##动态获取
vim /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0 ##接口使用设备
BOOTPROTO=dhcp ##网卡工作模式
ONBOOT=yes ##网络服务开启时自动激活
NAME=eth0 ##网络接口名称
:wq
systemctl restart network
static|none ##静态网络
vim /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0 ##设备
BOOTPROTO=static|none ##设备工作方式
ONBOOT=yes ##开启网络服务激活设备
NAME=eth0 ##网络接口名称
IPADDR=172.25.0.100 ##IP
NETNASK=255.255.255.0 | PREFIX=24 ##子网掩码
####3.gateway 网关####
1.路由器
主要功能是用来作nat的
dnat 目的地地址转换
snat 源地址转换
2.网关
路由器上和自己处在同一个网段的那个ip
3.设定网关
systemctl stop NetwrokManager
vim /etc/sysconfig/network ##全局网关
GATEWAY=网关ip
vim /etc/sysconfig/network-scripts/ifcfg-网卡配置文件 ##网卡接口网关
GATEWAY=网关ip
systemctl restart netwrok
route -n ##查询网关
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 (网关)172.25.0.254 0.0.0.0 UG 0 0 0 eth0
172.25.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
####5.dns####
1.dns
dns是一台服务器
这太服务器提供了回答客户主机名和ip对应关系的功能
2.设定dns
vim /etc/resolv.conf
nameserver dns服务器ip
vim /etc/sysconfig/network-scripts/ifcfg-网卡配置文件
DNS1=dns服务器ip
3.本地解析文件
vim /etc/hosts
ip 主机名称
4.本地解析文件和dns读取的优先级调整
/etc/nsswitch.conf
38 #hosts: db files nisplus nis dns
39 hosts: files dns ##files代表本地解析文件,dns代表dns服务器,那个在前面那个优先
5.dhcp服务的配置
####11.管理网络####
###################
####1.ip基础知识####
1.ipv4
2进制32位-----10进制
172.25.0.10/255.255.255.0
172.25.0.10:ip地址
255.255.255.0:子网掩码
子网掩码255位对应的ip位为网络位
子网掩码0对应的ip位为主机位
####2.配置ip####
<<图形化>>
1.图形界面
nm-connection-editor
2.文本化图形
nmtui
<<命令>>
ifconfig 网卡 ip netmask ##临时设定
nmcli connection add type ethernet con-name westos ifname eth0 autoconnect yes
nmcli connection add type ethernet con-name westos ifname eth0 ip4 ip/24
nmcli connection delete westos
nmcli connection show
nmcli connection down westos
nmcli connection up westos
nmcli connection modify "westos" ipv4.addresses newip/24
nmcli connection modify "westos" ipv4.method <auto|manual>
nmcli device connect eth0
nmcli device disconnect eth0
nmcli device show
nmcli device status
<<文件>>
dhcp ##动态获取
vim /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0 ##接口使用设备
BOOTPROTO=dhcp ##网卡工作模式
ONBOOT=yes ##网络服务开启时自动激活
NAME=eth0 ##网络接口名称
:wq
systemctl restart network
static|none ##静态网络
vim /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0 ##设备
BOOTPROTO=static|none ##设备工作方式
ONBOOT=yes ##开启网络服务激活设备
NAME=eth0 ##网络接口名称
IPADDR=172.25.0.100 ##IP
NETNASK=255.255.255.0 | PREFIX=24 ##子网掩码
####3.gateway 网关####
1.路由器
主要功能是用来作nat的
dnat 目的地地址转换
snat 源地址转换
2.网关
路由器上和自己处在同一个网段的那个ip
3.设定网关
systemctl stop NetwrokManager
vim /etc/sysconfig/network ##全局网关
GATEWAY=网关ip
vim /etc/sysconfig/network-scripts/ifcfg-网卡配置文件 ##网卡接口网关
GATEWAY=网关ip
systemctl restart netwrok
route -n ##查询网关
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 (网关)172.25.0.254 0.0.0.0 UG 0 0 0 eth0
172.25.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
####5.dns####
1.dns
dns是一台服务器
这太服务器提供了回答客户主机名和ip对应关系的功能
2.设定dns
vim /etc/resolv.conf
nameserver dns服务器ip
vim /etc/sysconfig/network-scripts/ifcfg-网卡配置文件
DNS1=dns服务器ip
3.本地解析文件
vim /etc/hosts
ip 主机名称
4.本地解析文件和dns读取的优先级调整
/etc/nsswitch.conf
38 #hosts: db files nisplus nis dns
39 hosts: files dns ##files代表本地解析文件,dns代表dns服务器,那个在前面那个优先
5.dhcp服务的配置
0 0
- unit 11
- unit 11
- RH133 Unit 11 Troubleshooting
- 11-NAL unit解码
- unit 11-12作业
- RH033-Unit 11-进程管理
- Linux--RH124---unit 11 管理网络
- Linux--RH134---unit 11 系统恢复技术
- Linux--RH254---unit 11 bash 2
- [Fatal Error] xxx.pas(11): Circular unit reference to 'xxx'
- uvcvideo: Failed to query (135) UVC control 11 (unit 5)
- IE Unit
- unit test
- J-Unit
- Unit 1
- Unit Testing
- unit uThreadPool
- Unit 1
- php + 七牛上传遇到 nginx 413 nginx 413 Request Entity Too Large
- POJ3278:Catch That Cow(BFS)
- [LeetCode]442 Find All Duplicates in an Array
- Java 中方法的重载
- 2017-01-10 笔记 P2P网络 集中式网络与分散式网络
- unit 11
- Redis Sentinel(哨兵):集群解决方案
- 【eclipse】eclipse插件之Findbugs、Checkstyle、PMD安装及使用
- LED框架学习
- tomcat7源码分析
- TextView常见问题
- 多重纹理和纹理组合器
- unit 12
- Java面试题全集(下)