spring cloud config整合gitlab搭建分布式的配置中心
来源:互联网 发布:磁力看片软件 编辑:程序博客网 时间:2024/05/01 17:11
在前面的博客中,我们都是将配置文件放在各自的服务中,但是这样做有一个缺点,一旦配置修改了,那么我们就必须停机,然后修改配置文件后再进行上线,服务少的话,这样做还无可厚非,但是如果是成百上千的服务了,这个时候,就需要用到分布式的配置管理了。而spring cloud config正是用来解决这个问题而生的。下面就结合gitlab来实现分布式配置中心的搭建。spring cloud config配置中心由server端和client端组成,
前提:在gitlab中的工程下新建一个配置文件configserver-dev.properties
一、配置Server
1、添加依赖
<dependency><groupId>org.springframework.cloud</groupId><artifactId>spring-cloud-config-server</artifactId></dependency>2、在Application主类开启支持
@EnableConfigServer3、配置application.yml文件
server: port: 8888spring: application: name: config cloud: config: server: git: uri: https://gitlab.xxx.com/xxxxx/xxxxx.git # 配置gitlab仓库的地址,注意,此处必须以.git结尾 search-paths: /config-repo # gitlab仓库地址下的相对地址,可以配置多个,用,分割。 username: your username # gitlab仓库的账号 password: your password # gitlab仓库的密码注意:如果配置文件放置在Git存储库的根目录下,则无需使用searchPaths参数,本例中的配置文件在config-repo目录中,因此使用searchPaths参数提示Config服务器搜索config-repo子目录
4、启动server,并在浏览器输入http://localhost:8888/configserver/dev/master
{ "name": "configserver", "profiles": [ "dev" ], "label": "master", "version": "073cda9ce85a3eed00e406f4ebcc4651ee4d9b19", "state": null, "propertySources": [ { "name": "https://gitlab.xxx.com/xxxxx/xxxxx/project/config-repo/configserver.properties", "source": { "name": "chhliuxyh", "hello": "i'm the king of the world!!!", "profile": "profile-default" } } ]}可以看到server端已经可以从gitlab上读取到配置文件了。可以通过如下表单中的方式访问gitlab上的资源
/{application}/{profile}[/{label}]/{application}-{profile}.yml/{label}/{application}-{profile}.yml/{application}-{profile}.properties/{label}/{application}-{profile}.properties例如在浏览器中输入:http://localhost:8888/configserver-dev.yml,结果如下:
hello: i'm the king of the world!!!name: chhliuxyhprofile: profile-default二、配置客户端
1、添加pom依赖
<dependency><groupId>org.springframework.cloud</groupId><artifactId>spring-cloud-starter-config</artifactId></dependency><dependency><groupId>org.springframework.boot</groupId><artifactId>spring-boot-starter-web</artifactId></dependency>2、配置bootstrap.yml文件
注意:此处的配置文件需要放在bootstrap.properties或者是bootstrap.yml文件中,因为config的相关配置会先于application.properties,而bootstrap.properties的加载也是先于application.properties
server: port: 8889spring: application: name: configserver # 必须与配置文件的前缀一致,例如此处我们的配置文件名是configserver-dev.properties,则此处需配置成configserver cloud: config: uri: http://localhost:8888/ //配置spring cloud config服务端的url profile: dev # 指定profile label: master # 指定gitlab仓库的分支3、验证客户端
在客户端新增一个Controller
package com.chhliu.springcloud.config;import org.springframework.beans.factory.annotation.Value;import org.springframework.boot.SpringApplication;import org.springframework.boot.autoconfigure.SpringBootApplication;import org.springframework.cloud.context.config.annotation.RefreshScope;import org.springframework.web.bind.annotation.GetMapping;import org.springframework.web.bind.annotation.RestController;@SpringBootApplication@RestController@RefreshScope //注解@RefreshScope指示Config客户端在服务器配置改变时,也刷新注入的属性值public class SpringcloudConfigClientApplication {public static void main(String[] args) {SpringApplication.run(SpringcloudConfigClientApplication.class, args);}@Value("${hello}") // 读取gitlab配置文件中的属性,如果我们读取到了值,说明客户端是OK的private String profile;@GetMapping("/hello")public String hello() {return this.profile;}}在浏览器中访问:http://localhost:8889/hello,结果如下:
i'm the king of the world!!!说明客户端已经可以从服务端获取到值了。
三、动态刷新
无需重新启动客户端,即可更新Spring Cloud Config管理的配置
1、更新gitlab仓库中configserver-dev.properties配置文件中hello对应的属性值
2、访问http://localhost:8888/configserver/dev/master,发现server端内容已经更新
3、对Conf客户端发一个POST请求http://localhost:8889/refresh,返回200 OK。再次访问http://localhost:8889/hello,可见在并未重启客户端服务的情况下,读到的属性值已经动态更新
PS:要想实现动态刷新,需要在pom文件中添加以下starter
<dependency><groupId>org.springframework.boot</groupId><artifactId>spring-boot-starter-actuator</artifactId></dependency>
- spring cloud config整合gitlab搭建分布式的配置中心
- spring cloud config整合gitlab搭建分布式的配置中心
- SpringCloud: 分布式配置中心(Spring Cloud Config)
- 分布式配置中心Spring Cloud Config初窥
- spring cloud config分布式配置中心的高可用
- SpringCloud: 高可用的分布式配置中心(Spring Cloud Config)
- 使用Spring Cloud Config搭建配置中心
- 使用Spring Cloud Config搭建配置中心
- Spring Cloud(八)高可用的分布式配置中心 Spring Cloud Config
- Spring Cloud(九)高可用的分布式配置中心 Spring Cloud Config 集成 Eureka 服务
- Spring Cloud(十)高可用的分布式配置中心 Spring Cloud Config 中使用 Refresh
- SpringCloud之分布式服务配置中心(Spring Cloud Config)
- 第六篇: 分布式配置中心(Spring Cloud Config)
- SpringCloud教程 | 第六篇: 分布式配置中心(Spring Cloud Config)
- SpringCloud 教程 | 第六篇:分布式配置中心(Spring Cloud Config)
- 配置中心:Spring Cloud Config
- 史上最简单的SpringCloud教程 | 第七篇: 高可用的分布式配置中心(Spring Cloud Config)
- 史上最简单的SpringCloud教程 | 第七篇: 高可用的分布式配置中心(Spring Cloud Config)
- 蓝桥杯 算法提高 01背包
- jQuery选择器之类选择器
- STM32F1小白系列之二、UART/USART
- 程序员的机器学习入门笔记(十):人脸识别核心算法PCA的前世与今生(强烈推荐)
- Linux之vim的使用
- spring cloud config整合gitlab搭建分布式的配置中心
- 位运算之判断奇偶性&1
- Android阅读资料链接
- LeetCode :【Easy】461. Hamming Distance
- JAVA和Zookeeper交互的初级代码
- 页面按F5刷新重复提交表单数据的解决办法
- 一般服务器数据库的默认登录界面
- 微信网页开发授权(获取用户信息) 微信公众平台开发教程(4)
- iOS NSMutableAttributedString字符串属性