wince上能够使用的hook是有限的
来源:互联网 发布:淘宝怎么拒签退款流程 编辑:程序博客网 时间:2024/05/17 10:09
最近在研究如果阻止来电通知消息的弹出,尝试了几种方法都不好用:
(1)使用TAPI截获来电,隐藏来电提示框
(2)使用RIL接口截获来电,隐藏来电提示框
(3)使用State and notification broker,隐藏来电提示框
结果:提示框总是要显示一下再隐藏。
今天又调研了一下SetWindowsHookEx 来设置“消息钩子”,这种钩子能够钩住各种消息,它在pc平台上应用的挺多的,在wince上也能使用但没有相关文档。今天发现在wince上似乎只能捕获一些键盘事件,比如VK_TTALK、VK_HOME等等。
wince下只能用三种钩子
#define WH_JOURNALRECORD 0
#define WH_JOURNALPLAYBACK 1
#define WH_KEYBOARD_LL 20
参考自:
Here is an article from Windows CE Developers FAQ from CEGadgers.com. It
could answer your question.
10.9 SetWindowsHookEx really does work, sort of.
If you believe the Microsoft documentation, SetWindowsHookEx does not work
under Windows CE. However, if you have read this FAQ you know that
SetWindowsHookEx can be found in coredll (2.11 PSPC and HPC Pro versions
only). The question is, what does it do, and is it a full implementation.
I have been wanting to write an ATL control that passes messages (like
WM_HIBERNATE) to VBCE. One way to do this is to create an ATL control,
implement a connection point, and install a windows hook that monitors the
message queue, and whenever a relevant message appears, fires an event off
to VB. Unfortunately, every combination of
gHook = SetWindowsHookEx(WH_CALLWNDPROC, (HOOKPROC) MyWndProc, gInstance,
0);
returned an error 87 (incorrect parameter). Further searching through the PB
header files reveals only three hook-related defines:
#define WH_JOURNALRECORD 0
#define WH_JOURNALPLAYBACK 1
#define WH_KEYBOARD_LL 20
So I stopped using WH_CALLWNDPROC and tried WH_KEYBOARD_LL, and found that
it worked quite well. I actually implemented a hook callback that watched
for VK_OFF, and when detected, waited 2 seconds before returning. Whenever I
pressed the power button the device would indeed wait before turning off. I
also attempted to abort the power off by returning a non-zero number from
the hook callback. While this does prevent the power button from powering
off the device, it also causes the device to crash. Besides, VK_OFF is only
generated when the off button is pressed, and not when a device time-out
occurs, so the code was of marginal use. However, if you need to trap other
low-level keyboard commands (ctrl-esc, etc) SetWindowsHookEx might be for
you.
While I imagine journal record and playback are implemented as well, I have
not tried them.
could answer your question.
10.9 SetWindowsHookEx really does work, sort of.
If you believe the Microsoft documentation, SetWindowsHookEx does not work
under Windows CE. However, if you have read this FAQ you know that
SetWindowsHookEx can be found in coredll (2.11 PSPC and HPC Pro versions
only). The question is, what does it do, and is it a full implementation.
I have been wanting to write an ATL control that passes messages (like
WM_HIBERNATE) to VBCE. One way to do this is to create an ATL control,
implement a connection point, and install a windows hook that monitors the
message queue, and whenever a relevant message appears, fires an event off
to VB. Unfortunately, every combination of
gHook = SetWindowsHookEx(WH_CALLWNDPROC, (HOOKPROC) MyWndProc, gInstance,
0);
returned an error 87 (incorrect parameter). Further searching through the PB
header files reveals only three hook-related defines:
#define WH_JOURNALRECORD 0
#define WH_JOURNALPLAYBACK 1
#define WH_KEYBOARD_LL 20
So I stopped using WH_CALLWNDPROC and tried WH_KEYBOARD_LL, and found that
it worked quite well. I actually implemented a hook callback that watched
for VK_OFF, and when detected, waited 2 seconds before returning. Whenever I
pressed the power button the device would indeed wait before turning off. I
also attempted to abort the power off by returning a non-zero number from
the hook callback. While this does prevent the power button from powering
off the device, it also causes the device to crash. Besides, VK_OFF is only
generated when the off button is pressed, and not when a device time-out
occurs, so the code was of marginal use. However, if you need to trap other
low-level keyboard commands (ctrl-esc, etc) SetWindowsHookEx might be for
you.
While I imagine journal record and playback are implemented as well, I have
not tried them.
因此,我不能使用这种消息hook来阻止来电提示。那么只能考虑API Hook技术看看。而现在关键是不知道系统是调用什么API来弹出来电提示的。或许cprog.exe仅仅是监听并截获了RIL_NOTIFY_RING消息,然后把Phone - Incoming显示出来?又或者是他调用了某一个API,这个API能够弹出Phone-Incoming对话框。
再试试吧!加油!
- wince上能够使用的hook是有限的
- wince上能够使用的hook是有限的
- wince上能够使用的hook是有限的
- 假使宇宙是有限的
- 有限域上的逆运算
- 有限域上的逆运算
- 人的精力是有限的
- 我们的时间是有限的
- 世界是有限的还是无限的?
- JAVA_有限队列的使用
- 除了使用hook外,下面的代码也能够在全局捕捉鼠标:(csdn)
- 意志力是一种有限的资源吗?
- 每一个时刻所能捕捉的东西是有限的 甚至每一段记忆所能缅怀的一切也是有限的(上)
- 技术是无限的,人的生命是有限的
- android上的简单hook
- Hook的使用
- 使用全局的 HOOK
- hook的使用
- xml文件读取-dom4j
- 如何在web页面中实现连接数据库的动态的组织结构图?
- const的思考
- MySQL 远程访问
- SQL Server 2008案例之CareGroup医疗组织(一)
- wince上能够使用的hook是有限的
- java中的日期处理
- MySQL使用笔记(一)远程连接服务器
- Free Listing and Free Promote your site!
- SQL Server 2008案例之CareGroup医疗组织(二)
- 俘获MM过程之天文分析
- 关于引用计数型智能指针的一些想法
- SQL Server2008案例之CyberSavvy公司(一)
- 类设计原则