第十一单元总结

来源:互联网 发布:python urllib介绍 编辑:程序博客网 时间:2024/04/30 22:28


管理网络

一.ip
基础知识
1.ipv4
2
进制32-----10进制

172.25.0.10/255.255.255.0
172.25.0.10
ip地址
255.255.255.0
:子网掩码
子网掩码255位对应的ip位为网络位
子网掩码0对应的ip位为主机位

####2.
配置ip####
<<
图形化>>
1.
图形界面
nm-connection-editor




2.文本化图形
nmtui













<<命令>>

ifconfig 网卡 ip netmask    ##临时设定










nmcli connection add type ethernet con-name westos ifname eth0 autoconnect yes


nmcli connection add type ethernet con-name westos ifname eth0 ip4 ip/24
nmcli connection delete westos
nmcli connection show
nmcli connection down westos
nmcli connection up westos
nmcli connection modify "westos" ipv4.addresses newip/24
nmcli connection modify "westos" ipv4.method <auto|manual>
nmcli device connect eth0
nmcli device disconnect eth0
nmcli device show
nmcli device status



<<
文件>>
dhcp        ##
动态获取
vim /etc/sysconfig/network-scripts/ifcfg-eth0


DEVICE=eth0     ##
接口使用设备
BOOTPROTO=dhcp      ##
网卡工作模式


ONBOOT=yes      ##
网络服务开启时自动激活
NAME=eth0       ##
网络接口名称
wq
systemctl restart network



static|none ##
静态网络
vim /etc/sysconfig/network-scripts/ifcfg-eth0



DEVICE=eth0         ##设备

BOOTPROTO=static|none       ##设备工作方式





ONBOOT=yes          ##开启网络服务激活设备
NAME=eth0           ##
网络接口名称
IPADDR=172.25.0.100       ##IP
NETMASK=255.255.255.0 | PREFIX=24 ##
子网掩码



####3.gateway
网关####

1.
路由器
主要功能是用来作nat
dnat   
目的地地址转换
snat   
源地址转换

2.
网关
路由器上和自己处在同一个网段的那个ip

3.
设定网关


systemctl stop NetwrokManager
vim /etc/sysconfig/network  ##
全局网关
GATEWAY=
网关ip

vim /etc/sysconfig/network-scripts/ifcfg-
网卡配置文件 ##网卡接口网关
GATEWAY=
网关ip

systemctl restart netwrok

route -n            ##
查询网关
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0   (
网关)172.25.0.254    0.0.0.0         UG   0      0        0 eth0
172.25.0.0      0.0.0.0         255.255.255.0   U    0      0        0 eth0



####5.dns####
1.dns
dns
是一台服务器
这太服务器提供了回答客户主机名和ip对应关系的功能

2.
设定dns
vim /etc/resolv.conf
nameserver dns
服务器ip

vim /etc/sysconfig/network-scripts/ifcfg-
网卡配置文件
DNS1=dns
服务器ip

3.
本地解析文件
vim /etc/hosts
ip 
主机名称

4.
本地解析文件和dns读取的优先级调整
/etc/nsswitch.conf
 38 #hosts:     db files nisplus nis dns
 39 hosts:      files dns      

 ##files代表本地解析文件,dns代表dns服务器,那个在前面那个优先

 
5.dhcp
服务的配置













0 0
原创粉丝点击