每天一个Linux命令(51)：ping

ping用于测试本地与目标主机的网络连通性，我们经常会说“ping一下某台机器，看是不是开着”，不能打开网页时会说“你先ping网关地址192.168.1.1试试”。它通过发送ICMP ECHO_REQUEST数据包到网络主机（send ICMP ECHO_REQUEST to network hosts），并显示响应情况，这样我们就可以根据它输出的信息来确定目标主机是否可访问。有些服务器为了防止通过ping探测到，通过防火墙设置了禁止ping或者在内核参数中禁止ping，这样就不能通过ping确定该主机是否还处于开启状态。

linux下的ping和windows下的ping稍有区别，linux下的ping不会自动终止，需要按ctrl+c终止，或者用-c指定回应的次数。

1.命令格式

ping [参数] [主机名或IP地址]

2.命令功能

用于确定网络和外部主机的状态；跟踪和隔离硬件和软件问题；测试，评估，管理网络。如果主机正在运行并连在网络上，它就对回送信号进行响应。每个回送信号请求包含一个网际协议（IP）和 ICMP 头，后面紧跟一个 tim 结构，以及填写这个信息包的足够字节。缺省情况是连续发送回送信号请求，直到接收到中断信号（Ctrl-C）。

ping每秒发送一个数据报并且为每个接收到的响应打印一行输出。ping计算信号往返时间和(信息)包丢失情况的统计信息，并且在完成之后显示一个简要总结。ping在程序超时或当接收到SIGINT信号时结束。Host是一个有效的主机名或者是互联网地址。

3.命令参数

-d，使用Socket的SO_DEBUG功能

-f，极限检测。大量且快速地传送网络封包到一台机器，查看它的回应

-n，只输出数值

-q，不显示任何传送封包的信息，只显示最后的结果

-r，忽略普通的Routing Table，直接将数据包传送到远端主机上。通常是查看本机的网络接口是否有问题

-R，记录路由过程

-v，详细显示指令的执行过程

-c 数目，在发送指定数目的包后停止

-i 秒数，设定间隔几秒送一个网络封包给一台机器，预设值是一秒送一次

-I 网络界面，使用指定的网络界面送出数据包

-l 前置载入，设置在送出要求信息之前，先行发出的数据包

-p 范本样式，设置填满数据包的范本样式

-s 字节数，指定发送的数据字节数，预设值是56，加上8字节的ICMP头，一共是64ICMP数据字节

-t 存活数值，设置存活数值TTL的大小

4.使用实例

例一：ping通的情况

命令：ping 192.168.120.205

# ping 192.168.120.205PING 192.168.120.205 (192.168.120.205) 56(84) bytes of data.64 bytes from 192.168.120.205: icmp_seq=1 ttl=64 time=0.720 ms64 bytes from 192.168.120.205: icmp_seq=2 ttl=64 time=0.181 ms64 bytes from 192.168.120.205: icmp_seq=3 ttl=64 time=0.191 ms64 bytes from 192.168.120.205: icmp_seq=4 ttl=64 time=0.188 ms64 bytes from 192.168.120.205: icmp_seq=5 ttl=64 time=0.189 ms--- 192.168.120.205 ping statistics ---5 packets transmitted, 5 received, 0% packet loss, time 4000msrtt min/avg/max/mdev = 0.181/0.293/0.720/0.214 ms

例二：ping不通的情况

命令：ping 192.168.120.202

# ping 192.168.120.202PING 192.168.120.202 (192.168.120.202) 56(84) bytes of data.From 192.168.120.204 icmp_seq=1 Destination Host UnreachableFrom 192.168.120.204 icmp_seq=2 Destination Host UnreachableFrom 192.168.120.204 icmp_seq=3 Destination Host UnreachableFrom 192.168.120.204 icmp_seq=4 Destination Host UnreachableFrom 192.168.120.204 icmp_seq=5 Destination Host UnreachableFrom 192.168.120.204 icmp_seq=6 Destination Host Unreachable--- 192.168.120.202 ping statistics ---8 packets transmitted, 0 received, +6 errors, 100% packet loss, time 7005ms, pipe 4

例三：ping网关

命令：ping -b 192.168.120.1

# routeKernel IP routing tableDestination     Gateway         Genmask         Flags Metric Ref    Use Iface192.168.120.0   *               255.255.255.0   U     0      0        0 eth0192.168.0.0     192.168.120.1   255.255.0.0     UG    0      0        0 eth010.0.0.0        192.168.120.1   255.0.0.0       UG    0      0        0 eth0default         192.168.120.240 0.0.0.0         UG    0      0        0 eth0# ping -b 192.168.120.1PING 192.168.120.1 (192.168.120.1) 56(84) bytes of data.64 bytes from 192.168.120.1: icmp_seq=1 ttl=255 time=2.02 ms64 bytes from 192.168.120.1: icmp_seq=2 ttl=255 time=1.83 ms64 bytes from 192.168.120.1: icmp_seq=3 ttl=255 time=1.68 ms64 bytes from 192.168.120.1: icmp_seq=4 ttl=255 time=1.98 ms64 bytes from 192.168.120.1: icmp_seq=5 ttl=255 time=1.88 ms--- 192.168.120.1 ping statistics ---5 packets transmitted, 5 received, 0% packet loss, time 4000msrtt min/avg/max/mdev = 1.682/1.880/2.020/0.129 ms

例四：ping指定的次数

命令：ping -c 10 192.168.120.206

# ping -c 10 192.168.120.206PING 192.168.120.206 (192.168.120.206) 56(84) bytes of data.64 bytes from 192.168.120.206: icmp_seq=1 ttl=64 time=1.25 ms64 bytes from 192.168.120.206: icmp_seq=2 ttl=64 time=0.260 ms64 bytes from 192.168.120.206: icmp_seq=3 ttl=64 time=0.242 ms64 bytes from 192.168.120.206: icmp_seq=4 ttl=64 time=0.271 ms64 bytes from 192.168.120.206: icmp_seq=5 ttl=64 time=0.274 ms64 bytes from 192.168.120.206: icmp_seq=6 ttl=64 time=0.295 ms64 bytes from 192.168.120.206: icmp_seq=7 ttl=64 time=0.269 ms64 bytes from 192.168.120.206: icmp_seq=8 ttl=64 time=0.270 ms64 bytes from 192.168.120.206: icmp_seq=9 ttl=64 time=0.253 ms64 bytes from 192.168.120.206: icmp_seq=10 ttl=64 time=0.289 ms--- 192.168.120.206 ping statistics ---10 packets transmitted, 10 received, 0% packet loss, time 9000msrtt min/avg/max/mdev = 0.242/0.367/1.251/0.295 ms

例五：有时间间隔和次数限制的ping

命令：ping -c 10 -i 0.5 192.168.120.206

# ping -c 10 -i 0.5 192.168.120.206PING 192.168.120.206 (192.168.120.206) 56(84) bytes of data.64 bytes from 192.168.120.206: icmp_seq=1 ttl=64 time=1.24 ms64 bytes from 192.168.120.206: icmp_seq=2 ttl=64 time=0.235 ms64 bytes from 192.168.120.206: icmp_seq=3 ttl=64 time=0.244 ms64 bytes from 192.168.120.206: icmp_seq=4 ttl=64 time=0.300 ms64 bytes from 192.168.120.206: icmp_seq=5 ttl=64 time=0.255 ms64 bytes from 192.168.120.206: icmp_seq=6 ttl=64 time=0.264 ms64 bytes from 192.168.120.206: icmp_seq=7 ttl=64 time=0.263 ms64 bytes from 192.168.120.206: icmp_seq=8 ttl=64 time=0.331 ms64 bytes from 192.168.120.206: icmp_seq=9 ttl=64 time=0.247 ms64 bytes from 192.168.120.206: icmp_seq=10 ttl=64 time=0.244 ms--- 192.168.120.206 ping statistics ---10 packets transmitted, 10 received, 0% packet loss, time 4499msrtt min/avg/max/mdev = 0.235/0.362/1.241/0.294 ms# ping -c 10 -i 0.01 192.168.120.206PING 192.168.120.206 (192.168.120.206) 56(84) bytes of data.64 bytes from 192.168.120.206: icmp_seq=1 ttl=64 time=0.244 ms64 bytes from 192.168.120.206: icmp_seq=2 ttl=64 time=0.195 ms64 bytes from 192.168.120.206: icmp_seq=3 ttl=64 time=0.219 ms64 bytes from 192.168.120.206: icmp_seq=4 ttl=64 time=0.204 ms64 bytes from 192.168.120.206: icmp_seq=5 ttl=64 time=3.56 ms64 bytes from 192.168.120.206: icmp_seq=6 ttl=64 time=1.93 ms64 bytes from 192.168.120.206: icmp_seq=7 ttl=64 time=0.193 ms64 bytes from 192.168.120.206: icmp_seq=8 ttl=64 time=0.193 ms64 bytes from 192.168.120.206: icmp_seq=9 ttl=64 time=0.202 ms64 bytes from 192.168.120.206: icmp_seq=10 ttl=64 time=0.211 ms--- 192.168.120.206 ping statistics ---10 packets transmitted, 10 received, 0% packet loss, time 90msrtt min/avg/max/mdev = 0.193/0.716/3.564/1.080 ms

例六：通过域名，ping公网上的站点

命令：ping -c 5 www.58.com

# ping -c 5 www.58.comPING www.58.com (211.151.111.30) 56(84) bytes of data.64 bytes from 211.151.111.30: icmp_req=1 ttl=49 time=14.7 ms64 bytes from 211.151.111.30: icmp_req=2 ttl=49 time=16.4 ms64 bytes from 211.151.111.30: icmp_req=3 ttl=49 time=15.2 ms64 bytes from 211.151.111.30: icmp_req=4 ttl=49 time=14.6 ms64 bytes from 211.151.111.30: icmp_req=5 ttl=49 time=19.9 ms--- www.58.com ping statistics ---5 packets transmitted, 5 received, 0% packet loss, time 20101msrtt min/avg/max/mdev = 14.618/16.192/19.917/1.965 ms

例七：多参数使用

命令：ping -i 3 -s 1024 -t 255 192.168.120.206

# ping -i 3 -s 1024 -t 255 192.168.120.206PING 192.168.120.206 (192.168.120.206) 1024(1052) bytes of data.1032 bytes from 192.168.120.206: icmp_seq=1 ttl=64 time=1.99 ms1032 bytes from 192.168.120.206: icmp_seq=2 ttl=64 time=0.694 ms1032 bytes from 192.168.120.206: icmp_seq=3 ttl=64 time=0.300 ms1032 bytes from 192.168.120.206: icmp_seq=4 ttl=64 time=0.481 ms1032 bytes from 192.168.120.206: icmp_seq=5 ttl=64 time=0.415 ms1032 bytes from 192.168.120.206: icmp_seq=6 ttl=64 time=0.600 ms1032 bytes from 192.168.120.206: icmp_seq=7 ttl=64 time=0.411 ms1032 bytes from 192.168.120.206: icmp_seq=8 ttl=64 time=0.281 ms1032 bytes from 192.168.120.206: icmp_seq=9 ttl=64 time=0.318 ms1032 bytes from 192.168.120.206: icmp_seq=10 ttl=64 time=0.362 ms1032 bytes from 192.168.120.206: icmp_seq=11 ttl=64 time=0.408 ms1032 bytes from 192.168.120.206: icmp_seq=12 ttl=64 time=0.445 ms1032 bytes from 192.168.120.206: icmp_seq=13 ttl=64 time=0.397 ms1032 bytes from 192.168.120.206: icmp_seq=14 ttl=64 time=0.406 ms1032 bytes from 192.168.120.206: icmp_seq=15 ttl=64 time=0.458 ms--- 192.168.120.206 ping statistics ---15 packets transmitted, 15 received, 0% packet loss, time 41999msrtt min/avg/max/mdev = 0.281/0.531/1.993/0.404 ms

说明：-i 3，发送周期为 3秒；-s，设置发送包的大小为1024；-t，设置TTL值为 255。