TMS320F28027学习笔记一

问题一：在程序下载到RAM中进行调试时，出现如下问题：

".text" size 0x9de page 0.  Available memory ranges:28027_RAM_lnk.cmd

推测是在28027_RAM_lnk.cmd中对应SARAM所声明的内存大小有关：

/*// TI File $Revision: /main/5 $// Checkin $Date: July 6, 2009   17:18:44 $//###########################################################################//// FILE:    28027_RAM_lnk.cmd//// TITLE:   Linker Command File For 28027 examples that run out of RAM////          This ONLY includes all SARAM blocks on the 28027 device.//          This does not include flash or OTP.////          Keep in mind that L0 is protected by the code//          security module.////          What this means is in most cases you will want to move to//          another memory map file which has more memory defined.////###########################################################################// $TI Release: DSP2802x Header Files Internal Release 2 $// $Release Date: July 15, 2008 $//###########################################################################*//* ======================================================// For Code Composer Studio V2.2 and later// ---------------------------------------// In addition to this memory linker command file,// add the header linker command file directly to the project.// The header linker command file is required to link the// peripheral structures to the proper locations within// the memory map.//// The header linker files are found in <base>\DSP2802x_headers\cmd//// For BIOS applications add:      DSP2802x_Headers_BIOS.cmd// For nonBIOS applications add:   DSP2802x_Headers_nonBIOS.cmd========================================================= *//* ======================================================// For Code Composer Studio prior to V2.2// --------------------------------------// 1) Use one of the following -l statements to include the// header linker command file in the project. The header linker// file is required to link the peripheral structures to the proper// locations within the memory map                                    *//* Uncomment this line to include file only for non-BIOS applications *//* -l DSP2802x_Headers_nonBIOS.cmd *//* Uncomment this line to include file only for BIOS applications *//* -l DSP2802x_Headers_BIOS.cmd *//* 2) In your project add the path to <base>\DSP2802x_headers\cmd to the   library search path under project->build options, linker tab,   library search path (-i)./*========================================================= *//* Define the memory block start/length for the DSP2802x   PAGE 0 will be used to organize program sections   PAGE 1 will be used to organize data sections   Notes:         Memory blocks on F28027 are uniform (ie same         physical memory) in both PAGE 0 and PAGE 1.         That is the same memory region should not be         defined for both PAGE 0 and PAGE 1.         Doing so will result in corruption of program         and/or data.         The L0 memory blocks is mirrored - that is         it can be accessed in high memory or low memory.         For simplicity only one instance is used in this         linker file.         Contiguous SARAM memory blocks can be combined         if required to create a larger memory block.*/MEMORY{PAGE 0 :   /* For this example, L0 is split between PAGE 0 and PAGE 1 */   /* BEGIN is used for the "boot to SARAM" bootloader mode   */   BEGIN      : origin = 0x000000, length = 0x000002   RAMM0      : origin = 0x000050, length = 0x0003B0   PRAML0     : origin = 0x008000, length = 0x000900   RESET      : origin = 0x3FFFC0, length = 0x000002   IQTABLES   : origin = 0x3FE000, length = 0x000B50     /* IQ Math Tables in Boot ROM */   IQTABLES2  : origin = 0x3FEB50, length = 0x00008C     /* IQ Math Tables in Boot ROM */   IQTABLES3  : origin = 0x3FEBDC, length = 0x0000AA /* IQ Math Tables in Boot ROM */   BOOTROM    : origin = 0x3FF27C, length = 0x000D44PAGE 1 :   /* For this example, L0 is split between PAGE 0 and PAGE 1 */   BOOT_RSVD   : origin = 0x000002, length = 0x00004E     /* Part of M0, BOOT rom will use this for stack */   RAMM1       : origin = 0x000400, length = 0x000400     /* on-chip RAM block M1 */   DRAML0      : origin = 0x008900, length = 0x000700}SECTIONS{   /* Setup for "boot to SARAM" mode:      The codestart section (found in DSP28_CodeStartBranch.asm)      re-directs execution to the start of user code.  */   codestart        : > BEGIN,     PAGE = 0   ramfuncs         : > RAMM0      PAGE = 0   .text            : > PRAML0,    PAGE = 0   .cinit           : > RAMM0,     PAGE = 0   .pinit           : > RAMM0,     PAGE = 0   .switch          : > RAMM0,     PAGE = 0   .reset           : > RESET,     PAGE = 0, TYPE = DSECT /* not used, */   .stack           : > RAMM1,     PAGE = 1   .ebss            : > DRAML0,    PAGE = 1   .econst          : > DRAML0,    PAGE = 1   .esysmem         : > RAMM1,     PAGE = 1   IQmath           : > PRAML0,    PAGE = 0   IQmathTables     : > IQTABLES,  PAGE = 0, TYPE = NOLOAD  /* Uncomment the section below if calling the IQNexp() or IQexp()      functions from the IQMath.lib library in order to utilize the      relevant IQ Math table in Boot ROM (This saves space and Boot ROM      is 1 wait-state). If this section is not uncommented, IQmathTables2      will be loaded into other memory (SARAM, Flash, etc.) and will take      up space, but 0 wait-state is possible.   */   /*   IQmathTables2    : > IQTABLES2, PAGE = 0, TYPE = NOLOAD   {              IQmath.lib<IQNexpTable.obj> (IQmathTablesRam)   }   */   /* Uncomment the section below if calling the IQNasin() or IQasin()      functions from the IQMath.lib library in order to utilize the      relevant IQ Math table in Boot ROM (This saves space and Boot ROM      is 1 wait-state). If this section is not uncommented, IQmathTables2      will be loaded into other memory (SARAM, Flash, etc.) and will take      up space, but 0 wait-state is possible.   */   /*   IQmathTables3    : > IQTABLES3, PAGE = 0, TYPE = NOLOAD   {              IQmath.lib<IQNasinTable.obj> (IQmathTablesRam)   }   */}/*//===========================================================================// End of file.//===========================================================================*/

TMS320F28027的实际内存映射：from ZHCSA13I

在对PRAML0的长度进行调整后编译成功，但仿真入口找不到main()。

只好放弃在RAM上跑，直接烧FALSH,附改FLASH方法：

更改使用的cmd文件为F28027.cmd,重新编译，可烧写