基于信号实现的用户态线程库
来源:互联网 发布:手机淘宝怎么快速升心 编辑:程序博客网 时间:2024/05/17 01:45
很早就有个疑问,如何实现类似pthread的线程函数?很快略读了下《C Interfaces and Implementations》最后一章Thread,其中有个switch函数,里头都是平台相关的汇编代码,这让我茅塞顿开,这不是和内核里头的任务调度函数switch完全类似么?就是保存现有执行环境,然后跳转到下一个任务。于是,我就写了个x86 32位,类unix环境下的用户态线程库(说是库,其实就实现了threadCreate和threadJoin两个函数),其接口仿照pthread_create和pthread_join函数。内核使用硬件的时钟中断来激发switch函数,那么我们就用SIGALRM信号以每秒1次的频率给程序发信号来激发我们自己的switch函数即可。由于最近在读APUE,并且题目中有道题要求写个软件定时器,我就顺便把自己的答案拿来用了。这个小玩意我放在了GitHub:
[https://github.com/Yuandong-Chen/Another-Thread-Model]
纯属娱乐,欢迎拍砖。
废话不说直接上代码:
thread.h:
#pragma once#include <stdio.h>#include <stdlib.h>#include <unistd.h>#include <string.h>#include <signal.h>#include <assert.h>#include <time.h>#define JMP(r) asm volatile \ ( "pushl %3\n\t" \ "popfd\n\t" \ "movl %2, %%ebp\n\t" \ "movl %0, %%esp\n\t" \ "jmp *%1\n\t" \ : \ : "m"(r._esp),"m"(r._eip),"m"(r._ebp),"m"(r._eflags) \ : \ )#define SAVE() asm volatile \ ( "movl %%eax, %0\n\t" \ "movl %%ecx, %1\n\t" \ "movl %%edx, %2\n\t" \ "movl %%ebx, %3\n\t" \ "movl %%esp, %4\n\t" \ "movl %%ebp, %5\n\t" \ "movl %%esi, %6\n\t" \ "movl %%edi, %7\n\t" \ "pushfd\n\t" \ "movl (%%esp), %%eax\n\t" \ "movl %%eax, %8\n\t" \ "popfd\n\t" \ : "=m"(_eax),"=m"(_ecx),"=m"(_edx),"=m"(_ebx) \ ,"=m"(_esp),"=m"(_ebp) \ , "=m"(_esi),"=m"(_edi),"=m"(_eflags) \ : \ : "%eax" \ )#define RESTORE(r) asm volatile \ ( "movl %0, %%eax\n\t" \ "movl %1, %%ecx\n\t" \ "movl %1, %%edx\n\t" \ "movl %3, %%ebx\n\t" \ "movl %4, %%esi\n\t" \ "movl %5, %%edi\n\t" \ : \ :"m"(r._eax),"m"(r._ecx),"m"(r._edx),"m"(r._ebx) \ , "m"(r._esi),"m"(r._edi) \ )typedef void Func(int);/* __timer struct is the real Timer struct we use * id is unique to each timer * intersec is the inteval seconds to each signal forwarding the this Timer * sigactor is the handler for this Timer * next is a internal member used for linked list */struct __timer{ void *next; unsigned int sec; unsigned int intersec; int id; Func *sigactor;};/* struct alarm is ugly for the compatibility with early struct. * I should have used unnamed member instead of __inner. */typedef struct alarm *Timer;struct alarm{ union{ struct { Timer next; unsigned int sec; }; struct __timer __inner; }; };typedef struct list *Header;struct list{ Timer head;};typedef struct __thread_table_regs Regs;struct __thread_table_regs{ int _edi; int _esi; int _ebp; int _esp; int _ebx; int _edx; int _ecx; int _eax; int _eip; int _eflags;};typedef struct __ez_thread Thread_t;struct __ez_thread{ Regs regs; int tid; sigset_t sigmask; unsigned int priority; int tick; int state; int errno; unsigned int stacktop; unsigned int stacksize; void *stack; void *retval; volatile int __reenter;};typedef struct __pnode pNode;struct __pnode{ pNode *next; pNode *prev; Thread_t *data;};typedef struct __loopcursor Cursor;struct __loopcursor{ int total; pNode *current;};typedef struct __stack *Stack_t;struct __stack{ int __pad[4096];};void switch_to(int);extern Header hdr_ptr;extern Cursor live;extern Cursor dead;extern Thread_t pmain;
thread.c:
/* MIT LicenseCopyright (c) 2017 Yuandong-ChenPermission is hereby granted, free of charge, to any person obtaining a copyof this software and associated documentation files (the "Software"), to dealin the Software without restriction, including without limitation the rightsto use, copy, modify, merge, publish, distribute, sublicense, and/or sellcopies of the Software, and to permit persons to whom the Software isfurnished to do so, subject to the following conditions:The above copyright notice and this permission notice shall be included in allcopies or substantial portions of the Software.THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THEAUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHERLIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THESOFTWARE. */#include "thread.h"/************************* Alarm facility *************************/struct list linkedlist;Header hdr_ptr = &linkedlist;Timer mallocTimer(int id, Func *actor,unsigned int sec, unsigned int interval){ Timer ret = (Timer)malloc(sizeof(struct alarm)); assert(ret); ret->__inner.id = id; ret->__inner.sigactor = actor; ret->__inner.intersec = interval; ret->sec = sec; return ret;}/* find Timer in linked list which id is id. * return: return NULL if not found, -1 if it's header link, * otherwise prev which is the previous Timer member to this Timer */Timer findTimerPrev(Header h, int id){ assert(h); if(h->head == NULL) return NULL; Timer t = h->head; Timer prev = NULL; while(t) { if(t->__inner.id == id){ if(prev == NULL) return (Timer)-1; else return prev; } prev = t; t = t->next; } return NULL;}/* delete Timer in linked list. * return: nothing, we ensure this t is deleted in the linked list. */void delTimer(Header h, Timer t){ assert(h); assert(t); Timer prevtodel = findTimerPrev(h, t->__inner.id); unsigned int base = 0; if(prevtodel) { if(prevtodel == (Timer)-1){ unsigned int res = (h->head)->sec; if(res != 0) { base = res; } else { kill(getpid(),SIGALRM); return; } h->head = (h->head)->next; Timer tmp = (h->head); while(tmp){ tmp->sec += base; tmp = tmp->next; } return; } else { base = (prevtodel->next)->sec; prevtodel->next = (prevtodel->next)->next; Timer tmp = (prevtodel->next); while(tmp){ tmp->sec += base; tmp = tmp->next; } return; } } return;}/* append Timer in appropriate place in linked list. * the appropriate place means all timers in linked list are arranged * according their next alarm seconds. * The algorithm we use here is that the real left alarm seconds for this Timer * is the sum of all the sec member in Timer in linked list prev to this Timer * plus its sec member. For example, we add 3 Timers to the linked list, * whose sec are 4, 3, 2 respectively. Then the linked list looks like: * 2 (real sec = 2) --> 1 (real sec = 2+1 = 3) --> 1 (real sec = 2+1+1 = 4) * The advantage is obviously, we dont need to remember how many seconds passed. * We always fetch the header to respond the alarm signal and set next alarm sec * as the next timer in the linked list. (The real situation is a little bit more * complex, for example if upcoming timers' sec equals 0, we need to call their * handler right away all together in a certain sequence. If its intersec is not * zero, we need to append it to the linked list again as quick as possible) * note: delTimer also address this problem. If we delete any Timer, we need to * recalculate the secs after this timer in the linked list.(simply to add sec to * the next timer and delete this timer node) * return: only 0 if success, otherwise the hole process failed. */int appendTimer(Header h, Timer t){ assert(h); assert(t); delTimer(h, t); if(h->head == NULL) { h->head = t; return 0; } Timer tmp = h->head; Timer prev = NULL; unsigned int prevbase = 0; unsigned int base = 0; while(tmp) { prevbase = base; base += tmp->sec; if(t->sec < base){ break; } else{ prev = tmp; tmp = tmp->next; } } if(prev == NULL) { (h->head)->sec -= t->sec; t->next = h->head; h->head = t; return 0; } if(tmp == NULL) t->sec -=base; else t->sec -=prevbase; prev->next = t; t->next = tmp; if(tmp) tmp->sec -= t->sec; return 0;}/* pop header timer in linked list. * return: its hander */Func* popTimer(Header h){ assert(h); if(h->head == NULL) return (Func *)-1; Func *ret = (h->head)->__inner.sigactor; Timer todel = h->head; h->head = (h->head)->next; // if its intersec greater than 0, we append it right away to the linked list if(todel->__inner.intersec > 0) { todel->sec = todel->__inner.intersec; appendTimer(h, todel); } return ret;}void printList(Header h){ assert(h); if(h->head == NULL) return; Timer tmp = h->head; while(tmp) { printf("timer[%d] = %u saved %u\n", tmp->__inner.id, tmp->sec, tmp->__inner.intersec); tmp = tmp->next; }}/* it's the real signal handler responding to every SIGALRM. */void sig_alarm_internal(int signo){ void funcWrapper(int signo, Func *func); if(hdr_ptr->head == NULL) return; Func *recv; if((recv = popTimer(hdr_ptr)) == (Func *)-1){ funcWrapper(SIGALRM, recv); } else { // signal ourself if next timer's sec = 0 if(hdr_ptr->head){ ((hdr_ptr->head)->sec > 0?alarm((hdr_ptr->head)->sec):kill(getpid(), SIGALRM)); } funcWrapper(SIGALRM, recv); }}/* Alarm function simulates native alarm function. * what if SIGALRM arrives when process is running in Alarm? * we just block the signal since there is no slow function in Alarm, * sig_alarm_internal will for sure address the signal very soon. */unsigned int Alarm(Header h, Timer mtimer){ sigset_t mask; sigset_t old; sigemptyset(&mask); sigaddset(&mask, SIGALRM); sigprocmask(SIG_BLOCK, &mask, &old); unsigned int res = 0; Timer t; if((t = findTimerPrev(h, mtimer->__inner.id)) == NULL) goto LL; t = h->head; while(t) { res += t->sec; // it's not precise, we should use alarm(0) for the first sec. // However, its simple enough to implement. if(t->__inner.id == mtimer->__inner.id) break; t = t->next; }LL: if(mtimer->sec == 0) { delTimer(h, mtimer); sigprocmask(SIG_SETMASK, &old, NULL); return res; } appendTimer(h, mtimer); if(mtimer->__inner.id == (h->head)->__inner.id) ((h->head)->sec > 0?alarm((h->head)->sec):kill(getpid(), SIGALRM)); sigprocmask(SIG_SETMASK, &old, NULL); return res;}void initTimer(){ struct sigaction act; act.sa_handler = sig_alarm_internal; act.sa_flags = SA_RESTART|SA_NODEFER; sigemptyset(&act.sa_mask); sigaction(SIGALRM, &act, NULL);}void funcWrapper(int signo, Func *func){ sigset_t mask; sigset_t old; sigemptyset(&mask); sigaddset(&mask, SIGALRM); sigprocmask(SIG_UNBLOCK, &mask, &old); func(signo); sigprocmask(SIG_SETMASK, &old, NULL);}/************************* Thread facility *************************/Cursor live;Cursor dead;Thread_t pmain;void initCursor(Cursor *cur){ cur->total = 0; cur->current = NULL;}Thread_t *findThread(Cursor *cur, int tid){ sigset_t mask,old; sigemptyset(&mask); sigaddset(&mask, SIGALRM); sigprocmask(SIG_BLOCK, &mask, &old); int counter = cur->total; if(counter == 0){ sigprocmask(SIG_SETMASK, &old, NULL); return NULL; } int i; pNode *tmp = cur->current; for (int i = 0; i < counter; ++i) { if((tmp->data)->tid == tid){ sigprocmask(SIG_SETMASK, &old, NULL); return tmp->data; } tmp = tmp->next; } sigprocmask(SIG_SETMASK, &old, NULL); return NULL;}int appendThread(Cursor *cur, Thread_t *pth){ sigset_t mask,old; sigemptyset(&mask); sigaddset(&mask, SIGALRM); sigprocmask(SIG_BLOCK, &mask, &old); if(cur->total == 0) { //note this never freed for simple implementation cur->current = (pNode *)malloc(sizeof(pNode)); assert(cur->current); (cur->current)->data = pth; (cur->current)->prev = cur->current; (cur->current)->next = cur->current; cur->total++; sigprocmask(SIG_SETMASK, &old, NULL); return 0; } else { #define MAXTHREADS 5 if(cur->total > MAXTHREADS) { assert((cur->total == MAXTHREADS)); sigprocmask(SIG_SETMASK, &old, NULL); return -1; } //freed at threadJoin for simple implementation pNode *tmp = malloc(sizeof(pNode)); assert(tmp); tmp->data = pth; tmp->prev = cur->current; tmp->next = (cur->current)->next; ((cur->current)->next)->prev = tmp; (cur->current)->next = tmp; cur->total++; sigprocmask(SIG_SETMASK, &old, NULL); return 0; }}pNode *deleteThread(Cursor *cur, int tid){ sigset_t mask,old; sigemptyset(&mask); sigaddset(&mask, SIGALRM); sigprocmask(SIG_BLOCK, &mask, &old); int counter = cur->total; int i; pNode *tmp = cur->current; for (int i = 0; i < counter; ++i) { if((tmp->data)->tid == tid){ (tmp->prev)->next = tmp->next; (tmp->next)->prev = tmp->prev; if(tmp == cur->current) { cur->current = cur->current->next; } //free(tmp); cur->total--; assert(cur->total); sigprocmask(SIG_SETMASK, &old, NULL); return tmp; } tmp = tmp->next; } sigprocmask(SIG_SETMASK, &old, NULL); return NULL;}void printThread(Thread_t *pth){ printf("pth tid: %d\n", pth->tid); printf("pth stack top: %x\n", pth->stacktop); printf("pth stack size: %u\n", pth->stacksize); printf("pth state: %d\n", pth->state); printf("pth errno: %d\n", pth->errno); printf("pth retval: %p\n", pth->retval); printf("pth sigmask: %u\n", pth->sigmask); printf("pth priority: %d\n", pth->priority); printf("pth tick: %d\n", pth->tick); printf("EFLAGS: %x\t", pth->regs._eflags); printf("EIP: %x\t", pth->regs._eip); printf("EAX: %x\t", pth->regs._eax); printf("ECX: %x\n", pth->regs._ecx); printf("EDX: %x\t", pth->regs._edx); printf("EBX: %x\t", pth->regs._ebx); printf("ESP: %x\t", pth->regs._esp); printf("EBP: %x\n", pth->regs._ebp); printf("ESI: %x\t", pth->regs._esi); printf("EDI: %x\n", pth->regs._edi);}void printLoop(Cursor *cur){ int count = 0; pNode *tmp = cur->current; assert(tmp); do{ printThread(tmp->data); tmp = tmp->next; count ++; }while(tmp != cur->current); printf("real total: %d\n", count); printf("total record:%d\n", cur->total); assert(count == cur->total);}int fetchTID(){ static int tid; return ++tid;}void real_entry(Thread_t *pth, void *(*start_rtn)(void *), void* args){ //printf("in real entry: %p\n", start_rtn); pth->retval = (*start_rtn)(args); //deleteThread(&live, pth->tid); /* some clean job here */ //free(pth->stack); //pth->stack = NULL; //pth->stacktop = 0; //pth->stacksize = 0; #define DETACHED 1 deleteThread(&live, pth->tid); appendThread(&dead, pth); if(pth->state == DETACHED) threadJoin(pth, NULL); switch_to(-1);}int threadCreat(Thread_t **pth, void *(*start_rtn)(void *), void *arg, unsigned int totalsize){ sigset_t mask,old; sigemptyset(&mask); sigaddset(&mask, SIGALRM); sigprocmask(SIG_BLOCK, &mask, &old); //freed at threadJoin for simple implementation *pth = malloc(sizeof(Thread_t)); #define PTHREAD_STACK_MIN 4096 //freed at threadJoin for simple implementation (*pth)->stack = malloc(PTHREAD_STACK_MIN); assert((*pth)->stack); (*pth)->stacktop = (((int)(*pth)->stack + PTHREAD_STACK_MIN)&(0xfffff000)); (*pth)->stacksize = PTHREAD_STACK_MIN - (((int)(*pth)->stack + PTHREAD_STACK_MIN) - (*pth)->stacktop); (*pth)->state = 0; // 0 JOINABLE 1 DETACHED (*pth)->priority = 1; //one seconds (*pth)->tick = (*pth)->priority; (*pth)->tid = fetchTID(); sigprocmask(0,NULL,&((*pth)->sigmask)); /* set params */ void *dest = (*pth)->stacktop - totalsize; memcpy(dest, pth, 4); dest += 4; memcpy(dest, &start_rtn, 4); dest += 4; memcpy(dest, &arg, totalsize - 8); (*pth)->regs._eip = &real_entry; (*pth)->regs._esp = (*pth)->stacktop - totalsize - 4; (*pth)->regs._edi = 0; (*pth)->regs._esi = 0; (*pth)->regs._ebp = 0; (*pth)->regs._eax = 0; (*pth)->regs._ebx = 0; (*pth)->regs._ecx = 0; (*pth)->regs._edx = 0; (*pth)->regs._eflags = 0; appendThread(&live, (*pth)); sigprocmask(SIG_SETMASK, &old, NULL); return 0;}int threadJoin(Thread_t *pth, void **rval_ptr){ sigset_t mask,old; sigemptyset(&mask); sigaddset(&mask, SIGALRM); sigprocmask(SIG_BLOCK, &mask, &old); Thread_t *find1, *find2; find1 = findThread(&live, pth->tid); find2 = findThread(&dead, pth->tid); if((find1 == NULL)&&(find2 == NULL)){ sigprocmask(SIG_SETMASK, &old, NULL); return -1; } if(find2){ if(rval_ptr != NULL) *rval_ptr = find2->retval; sigprocmask(SIG_SETMASK, &old, NULL); return 0; } sigprocmask(SIG_SETMASK, &old, NULL); while(1) { if((find2 = findThread(&dead, pth->tid))!= NULL){ if(rval_ptr!= NULL) *rval_ptr = find2->retval; pNode *tmp = deleteThread(&dead, pth->tid); free(tmp); free((Stack_t)find2->stack); free(find2); return 0; } } return -1;}void init(){ initTimer(); initCursor(&live); initCursor(&dead); appendThread(&live, &pmain); Alarm(hdr_ptr,mallocTimer(1, switch_to, 1, 1));}void switch_to(int signo){ sigset_t mask,old; sigemptyset(&mask); sigaddset(&mask, SIGALRM); sigprocmask(SIG_BLOCK, &mask, &old); Regs regs; //printf(""); if(signo == -1) { regs = live.current->data->regs; sigprocmask(SIG_SETMASK, &old, NULL); JMP(regs); assert(0); } int _edi; int _esi; int _ebp; int _esp; int _ebx; int _edx; int _ecx; int _eax; int _eip = &&_REENTERPOINT; int _eflags; live.current->data->__reenter = 0; /* save current context */ SAVE(); /* save context in current thread */ live.current->data->regs._eflags = _eflags; live.current->data->regs._eip = _eip; live.current->data->regs._eax = _eax; live.current->data->regs._ecx = _ecx; live.current->data->regs._edx = _edx; live.current->data->regs._ebx = _ebx; live.current->data->regs._esp = _esp; live.current->data->regs._ebp = _ebp; live.current->data->regs._esi = _esi; live.current->data->regs._edi = _edi; if(!live.current->data->__reenter) { goto _END; }_REENTERPOINT: regs = live.current->data->regs; if(live.current->data->__reenter){ live.current->data->__reenter = 0; sigprocmask(SIG_SETMASK, &old, NULL); return; } _END: live.current->data->__reenter = 1; regs = live.current->next->data->regs; live.current = live.current->next; sigprocmask(SIG_SETMASK, &old, NULL); JMP(regs); assert(0);}/************************* Test *************************//** * Note: The implementation is really bugy, right now only support compute in thread. * Even standard I/O in the thread will cause I/O bus error or segmentation error because * all pthread-reentrant function is not guaranteed in our thread model. * (pthread_mutex_t cannot block thread in our model cause we modify eip directly) */void *sum1tod(void *d){ int i, k, j=0; for (i = 0; i <= (int)d; ++i) { /* code */ j+=i; } return ((void *)j);}int main(int argc, char const *argv[]){ int res = 0; int i; init(); Thread_t *tid1, *tid2; int *res1, *res2; threadCreat(&tid1, sum1tod, 100, 12); threadCreat(&tid2, sum1tod, 100, 12); for (i = 0; i <= 100; ++i){ res+=i; } threadJoin(tid1, &res1); threadJoin(tid2, &res2); printf("parallel compute: %d = 5050 * 3\n", (int)res1+(int)res2+(int)res); return 0;}
编译方法:
gcc -m32 thread.c
MacOSX 运行结果:
0 0
- 基于信号实现的用户态线程库
- 基于ucontex实现用户级线程
- 用户空间实现线程 内核实现线程 线程的调度
- 使用信号实现线程同步
- 用户态线程库
- 基于MATLAB的音频信号处理技术实现
- 基于EEMD的信号处理方法分析和实现
- Java 实现基于UDP的用户登录
- 在用户空间实现的线程
- 基于用户级线程的远程调用效率测试
- 基于Spring+Ibatis的安全线程实现
- 基于Spring+Ibatis的安全线程实现
- 基于 JVMTI 实现 Java 线程的监控
- 基于 JVMTI 实现 Java 线程的监控
- 基于pthread的线程池,C++实现
- 基于 JVMTI 实现 Java 线程的监控
- 用户态实现线程调度(任务调度)
- 线程的3种实现方式--内核级线程, 用户级线程和混合型线程
- BNU 49102 进化之地(Evoland)【Bfs】
- HelloWorld
- js哪些情况会出现隐式类型转换
- Linux命令eval用法
- 【基于SSH框架的个人博客系统02】项目分析与数据库表设计
- 基于信号实现的用户态线程库
- c程序shell脚本获取返回值的方法
- caffe使用lenet5识别手写数字
- 图形上下,左右对称旋转代码
- Android-查看隐藏的API源码
- keras的基本用法(一)——回归模型
- 特征工程与sklearn
- hdu 6029 Graph Theory 【直接连线】
- .net程序或web服务无法访问oracle数据库,解决