树莓派运行opencv和caffe 配置Qt creator

如何让树莓派显示中文：
http://shumeipai.nxez.com/2016/03/13/how-to-make-raspberry-pi-display-chinese.html
https://jingyan.baidu.com/article/456c463b5e2e4a0a583144fe.html

默认树莓派没有安装vim，执行下面命令安装之。

sudo apt-get install -y vim

安装好之后就可以使用vi或者vim进行编辑操作，但是没有代码高亮显示。
在~目录下面新建.vimrc文件可以实现

pi@raspberrypi ~ $ cd ~pi@raspberrypi ~ $ vim .vimrcset numbersyntax onset tabstop=4

这样就ok了。

Linux上vi(vim)编辑器使用教程：
http://shumeipai.nxez.com/2013/12/26/linux-on-vim-editor-tutorials.html#more-613
配置树莓派交叉编译平台：
http://shumeipai.nxez.com/2013/10/08/configure-cross-compiler-platform-raspberry-pi.html#more-417
视频演示如何给树莓派安装摄像头模块：
http://shumeipai.nxez.com/2013/10/07/raspberry-pi-to-install-the-camera-module.html#more-410
给树莓派挂载移动硬盘或U盘：
http://shumeipai.nxez.com/page/46
使用raspi-config配置树莓派：
http://shumeipai.nxez.com/2013/09/07/raspi-config-configuration-raspberry-pie.html#more-159
树莓派如何安全关机重启？
http://shumeipai.nxez.com/2013/08/25/raspberry-pi-how-to-safely-shutdown-restart.html

树莓派2+OpenCV2.4.9环境搭建
http://blog.csdn.net/zx3517288/article/details/51706825

树莓派(raspberry pi)学习4: 更改键盘布局
http://blog.csdn.net/c80486/article/details/8460271
树莓派3B安装QT creator
http://blog.csdn.net/coekjin/article/details/52049273
Qt creator开发opencv，参考：
http://blog.csdn.net/moses1994/article/details/44827425

在.pro文件中添加如下配置文件即可：
INCLUDEPATH += /usr/local/include/opencv\
/usr/local/include/opencv2\
/usr/local/include

LIBS += /usr/local/lib/libopencv_calib3d.so \
/usr/local/lib/libopencv_contrib.so\
/usr/local/lib/libopencv_core.so \
/usr/local/lib/libopencv_features2d.so \
/usr/local/lib/libopencv_flann.so \
/usr/local/lib/libopencv_gpu.so \
/usr/local/lib/libopencv_highgui.so \
/usr/local/lib/libopencv_imgproc.so \
/usr/local/lib/libopencv_legacy.so \
/usr/local/lib/libopencv_ml.so \
/usr/local/lib/libopencv_nonfree.so \
/usr/local/lib/libopencv_objdetect.so \
/usr/local/lib/libopencv_ocl.so \
/usr/local/lib/libopencv_photo.so \
/usr/local/lib/libopencv_stitching.so \
/usr/local/lib/libopencv_superres.so \
/usr/local/lib/libopencv_ts.a \
/usr/local/lib/libopencv_video.so \
/usr/local/lib/libopencv_videostab.so
以上的配置信息可以通过指令：
pkg-config opencv –libs –cflags opencv >>opencv.config
打印出来，直接存入opencv.config，复制出来，调整格式即可。