LiDAR-Velodyne激光雷达pcap文件解析

       在使用velodyne的时候，PCAP数据解析比较麻烦，为此写了一点代码来专门解析PCAP文件，将PCAP格式数据转为XYZ格式的点云数据，写完之后发现其实代码也不多，更轻量级了，代码如下：

// readpcap.cpp : 定义控制台应用程序的入口点。//#define _CRT_SECURE_NO_DEPRECATE#define _CRT_SECURE_NO_WARNINGS#include "pcap.h"#include "stdio.h"#include "math.h"#include<stdlib.h>#include<conio.h>#include "velodyneptk.h"#define LINE_LEN 16int Azimuth_[12];//原始值float Azimuth_Value_[12];int Distance_[12][32];//原始值float Distance_Value_[12][32];int Atten_[12][32];//原始值Usefulmessage UsefulData;int framecount;int frameint;//计算时间戳函数float Timeoffsetvec[384];float lasersinvec[384];float lasercosvec[384];void Timeoffsetfun(){for (int i = 0; i < 24; i++){for (int j = 0; j < 16; j++){Timeoffsetvec[i * 16 + j] = i*55.296 + j*2.304;lasersinvec[i * 16 + j] = LASER_SIN[j];lasercosvec[i * 16 + j] = LASER_COS[j];}}}void dispatcher_handler(u_char *, const struct pcap_pkthdr *, const u_char *);//byte转int  Azimuthint bytes2ToInt(byte* bytes){int addr = bytes[0] & 0xFF;addr |= (bytes[1]<<8 & 0xFF00);return addr;}int bytes1ToInt(byte* bytes){int addr = bytes[0] & 0xFF;return addr;}//byte转int  Azimuthlong int bytes4ToInt(byte* bytes){long int addr = bytes[0] & 0xFF;addr |= (bytes[1] << 8 & 0xFF00);addr |= ((bytes[2] << 16) & 0xFF0000);addr |= ((bytes[3] << 24) & 0xFF000000);return addr;}float stamptimecount = 0;void UDPtoXYZfun(Usefulmessage data);void UDPtoXYZfunALL(Usefulmessage data);errno_t err;int _tmain(int argc, _TCHAR* argv[]){pcap_t *fp;char errbuf[PCAP_ERRBUF_SIZE];Usefulmessage UsefulData;Timeoffsetfun();framecount = 0;fp = pcap_open_offline("1.pcap",errbuf);pcap_loop(fp, 0, dispatcher_handler, NULL);pcap_close(fp);return 0;}void dispatcher_handler(u_char *temp1,const struct pcap_pkthdr *header,const u_char *pkt_data){u_int it = 0;(VOID*)temp1;//保存数据char fn[20];PointXYZ point;FILE *fp;long int ustime = header->ts.tv_usec;printf("%ld:%ld (%ld)\n", header->ts.tv_sec, header->ts.tv_usec, header->len);if (header->len==1248){byte timestampl[4];byte factoryl[2];byte lo[1248];memcpy(&lo, pkt_data, 1248);memcpy(×tampl, pkt_data + 42 + 12 * 100, 4);memcpy(&factoryl, pkt_data + 42 + 12 * 100 + 4, 2);//float fValuet = *((float*)×tampl); //系统时间int fValue1 = *((float*)&factoryl[0]);long int fValue = bytes4ToInt(timestampl);if (stamptimecount == 0){stamptimecount = fValue;}if ((fValue - stamptimecount) >= 100000){stamptimecount = fValue;frameint++;}/////保存数据sprintf_s(fn, "%05d.txt", frameint);//err  = fopen_s( &stream, "crt_fopen_s.c", "r" )) !=0if ((fp = fopen(fn, "a")) == NULL){printf("Create File failure 1");fclose(fp);//exit(1);}//read databyte datal[12][100];int packet_size = 100;int azimuth;float distance;int passway;for (int i = 0; i < 12; i++){memcpy(&datal[i], pkt_data + 42 + i * 100, packet_size);BYTE b[2];BYTE b1[1];memcpy(&b, pkt_data + 42 + i * 100 + 2, 2);azimuth = bytes2ToInt(b);UsefulData.JIAODU_[i] = azimuth;UsefulData.JIAODU2_[i] = azimuth*0.01;UsefulData.Timesec = header->ts.tv_sec;//printf("%f\n", UsefulData.JIAODU2_[i]);UsefulData.TimeStamp = fValue;for (int j = 0; j < 32; j++){memcpy(&b, pkt_data + 42 + i * 100 + 4 + j * 3, 2);memcpy(&b1, pkt_data + 42 + i * 100 + 4 + j * 3 + 2, 1);distance = float(bytes2ToInt(b))*0.002f;passway = bytes1ToInt(b1);if (distance<0.05){UsefulData.JULI_[i][j] = 0;UsefulData.PointPos[i][j] = i * 32 + j;//printf("%d  ", UsefulData.PointPos[i][j]);}else{UsefulData.JULI_[i][j] = distance;UsefulData.PointPos[i][j] = i * 32 + j;}UsefulData.PASSEGEWAY_[i][j] = passway;UsefulData.TimeOffset[i][j] = Timeoffsetvec[i * 32 + j] + header->ts.tv_usec;  //时间戳UsefulData.SIN_[i][j] = lasersinvec[i * 32 + j];UsefulData.COS_[i][j] = lasercosvec[i * 32 + j];//printf("%f ", UsefulData.PASSEGEWAY_[i][j]);}}//经度赋值for (int i1 = 0; i1 < 12; i1++){for (int k = 0; k < 32; k++){if (k < 16){UsefulData.Azimuth[i1][k] = UsefulData.JIAODU2_[i1];// +LASER_vert_correction[k];}else if (k >= 16){if (i1 < 11)//前11帧{if (UsefulData.JIAODU2_[i1 + 1] < UsefulData.JIAODU2_[i1]){UsefulData.JIAODU2_[i1 + 1] += 360.0;float azimuth2 = UsefulData.JIAODU2_[i1] + (UsefulData.JIAODU2_[i1 + 1] - UsefulData.JIAODU2_[i1]) / 2.0;if (azimuth2 > 360)// 角度变化了{azimuth2 -= 360;UsefulData.Azimuth[i1][k] = azimuth2;// +LASER_vert_correction[k - 16];}else{UsefulData.Azimuth[i1][k] = azimuth2;// +LASER_vert_correction[k - 16];}}else{float azimuth4 = UsefulData.JIAODU2_[i1] + (UsefulData.JIAODU2_[i1 + 1] - UsefulData.JIAODU2_[i1]) / 2.0;UsefulData.Azimuth[i1][k] = azimuth4;// +LASER_vert_correction[k - 16}}else if (i1 == 11)//最后一帧{float azimuth3 = UsefulData.JIAODU2_[i1] + 0.2;if (azimuth3 > 360){azimuth3 -= 360;}else{}UsefulData.Azimuth[i1][k] = azimuth3;//;+LASER_vert_correction[k - 16];}}point.x = UsefulData.JULI_[i1][k] * UsefulData.COS_[i1][k] * sin(UsefulData.Azimuth[i1][k] / 180.0*3.1415926);point.y = UsefulData.JULI_[i1][k] * UsefulData.COS_[i1][k] * cos(UsefulData.Azimuth[i1][k] / 180.0*3.1415926);point.z = UsefulData.JULI_[i1][k] * UsefulData.SIN_[i1][k];point.r = UsefulData.PASSEGEWAY_[i1][k];point.tus = UsefulData.TimeOffset[i1][k];point.tsec = UsefulData.Timesec;if ((point.x == 0) && (point.y == 0) && (point.z == 0) || (UsefulData.JULI_[i1][k] <= 0.05)){}else{//X  Y  Z  Azimuth Distance Laser_ID fprintf(fp, "%f %f %f %f %f %d ", point.x, point.y, point.z, UsefulData.Azimuth[i1][k], UsefulData.JULI_[i1][k], UsefulData.PointPos[i1][k] % 16);fprintf(fp, "%f %f %ld %ld\n ", UsefulData.PASSEGEWAY_[i1][k], point.tus,  header->ts.tv_sec,ustime);}}}fclose(fp);}printf("\n\n");}void UDPtoXYZfunALL(Usefulmessage data){PointXYZ point[384];FILE *fp;if ((fp = fopen("all.txt", "a")) == NULL){printf("Create File failure");//getch();exit(1);}for (int i = 0; i < 12; i++){for (int j = 0; j < 32; j++){point[i * 32 + j].x = data.JULI_[i][j] * data.COS_[i][j] * sin(data.Azimuth[i][j] / 180.0*3.1415926);point[i * 32 + j].y = data.JULI_[i][j] * data.COS_[i][j] * cos(data.Azimuth[i][j] / 180.0*3.1415926);point[i * 32 + j].z = data.JULI_[i][j] * data.SIN_[i][j];point[i * 32 + j].r = data.PASSEGEWAY_[i][j];point[i * 32 + j].tus = data.TimeOffset[i][j];point[i * 32 + j].tsec = data.Timesec;if ((point[i * 32 + j].x == 0) && (point[i * 32 + j].y == 0) && (point[i * 32 + j].z == 0) || (data.JULI_[i][j] <= 0.05)){}else{//X  Y  Z  Azimuth Distance Laser_ID fprintf(fp, "%f %f %f %f %f %d ", point[i * 32 + j].x, point[i * 32 + j].y, point[i * 32 + j].z, data.Azimuth[i][j], data.JULI_[i][j], data.PointPos[i][j] % 16);fprintf(fp, "%f %f %f %f \n ", data.PASSEGEWAY_[i][j], point[i * 32 + j].tus, data.TimeStamp, data.Timesec);//fprintf(fp, "%f %f %f \n", point[i * 32 + j].x, point[i * 32 + j].y, point[i * 32 + j].z);}}}fclose(fp);}void UDPtoXYZfun(Usefulmessage data){PointXYZ point[384];FILE *fp;if ((fp = fopen("my.txt", "a")) == NULL){printf("Create File failure");//getch();exit(1);}for (int i = 0; i < 12; i++){for (int j = 0; j < 32; j++){point[i * 32 + j].x = data.JULI_[i][j]*data.COS_[i][j]*sin(data.Azimuth[i][j]/180.0*3.1415926);point[i * 32 + j].y = data.JULI_[i][j]*data.COS_[i][j]*cos(data.Azimuth[i][j]/180.0*3.1415926);point[i * 32 + j].z = data.JULI_[i][j] * data.SIN_[i][j];point[i * 32 + j].r = data.PASSEGEWAY_[i][j];point[i * 32 + j].tus = data.TimeOffset[i][j];point[i * 32 + j].tsec = data.Timesec;if ((point[i * 32 + j].x == 0) && (point[i * 32 + j].y == 0) && (point[i * 32 + j].z == 0)||(data.JULI_[i][j]<=0.05)){}else{//fprintf(fp, "%f %f %f %f %f %d\n", point[i * 32 + j].x, point[i * 32 + j].y, point[i * 32 + j].z,data.Azimuth[i][j],data.JULI_[i][j],data.PointPos[i][j]%16);fprintf(fp, "%f %f %f \n", point[i * 32 + j].x, point[i * 32 + j].y, point[i * 32 + j].z);}}}fclose(fp);}