lua中关于取长度问题
来源:互联网 发布:数据分析与知识发现 编辑:程序博客网 时间:2024/05/21 09:51
原文:http://www.2cto.com/kf/201501/370498.html
首先要明确的是lua中有两部分:数组部分和hash表部分。而基本上所有操作都是先数组后hash表。
local test1 = { 1 , 2 , 3 , 4 , 5 }
print(#test1)
打印结果: 5
local test1 = { 1, 3 , 5 , 2 , 4 }
print(#test1)
打印结果: 5 (好吧。。。。当然跟上面一样,都是作为数组中的值。。。)
local test1 = {[1] = 1 , [2] = 2 , [3] = 3 , [4] = 4 ,[5] = 5}
print(#test1)
打印结果: 5 (这里table中没有数组部分了,只有hash表部分)
local test1 = {[1] = 1 , [3] = 3 , [4] = 4 , [6] = 6 ,[2] = 2}
print(#test1)
打印结果: 6
for i = 1 , #test1 do
print(test1[i])
end
如果全部打印出来, 1 2 3 4 nil 6
明明写的table中只有5个元素,怎么会变成6那。。。。这里的原因就要看下lua源码实现
/*** Try to find a boundary in table `t'. A `boundary' is an integer index** such that t[i] is non-nil and t[i+1] is nil (and 0 if t[1] is nil).*/int luaH_getn (Table *t) { unsigned int j = t->sizearray; if (j > 0 && ttisnil(&t->array[j - 1])) { /* there is a boundary in the array part: (binary) search for it */ unsigned int i = 0; while (j - i > 1) { unsigned int m = (i+j)/2; if (ttisnil(&t->array[m - 1])) j = m; else i = m; } return i; } /* else must find a boundary in hash part */ else if (isdummy(t->node)) /* hash part is empty? */ return j; /* that is easy... */ else return unbound_search(t, j);}
还是先数组,数组没有后hash部分。再来看下关于hash表部分的取长度
static int unbound_search (Table *t, unsigned int j) { unsigned int i = j; /* i is zero or a present index */ j++; /* find `i' and `j' such that i is present and j is not */ while (!ttisnil(luaH_getint(t, j))) { i = j; j *= 2; if (j > cast(unsigned int, MAX_INT)) { /* overflow? */ /* table was built with bad purposes: resort to linear search */ i = 1; while (!ttisnil(luaH_getint(t, i))) i++; return i - 1; } } /* now do a binary search between them */ while (j - i > 1) { unsigned int m = (i+j)/2; if (ttisnil(luaH_getint(t, m))) j = m; else i = m; } return i;}
j++保证j是hash部分的第一个值,从j开始,如果j位置是有值的,那么将j扩大两倍,再检查两倍之后hash表中是否可以取到值,直到找到没有值的地方,这个值就在i 到 j这个区间中。然后再用折半查找找到 i 到 j之间找到的最后一个nil的,前面的就是它的长度了。 错略看来。luaH_getint用来取值
const TValue *luaH_getint (Table *t, int key)而它的声明看来 ,第二个参数是key,通过key来取value, 而外面对传入的key是++的操作 可知计算长度用来寻找的这个key一定是个整形,而且还得是连续的(不一定)。(当然这个是不深究细节实现错略看下来的分析。。。。。)
再来验证下:
local test1 = {1 , 3 , [4] = 4 , [6] = 6 ,[2] = 2}
print(#test1)
打印结果: 2
也就是上面源码中,会先遍历数组部分,数组部分有就结束,没有再遍历hash表部分
local test1 = {[4] = 4 , [6] = 6 ,[2] = 2}
print(#test1)
打印结果:0
数组之后的第一位是j++ 如果value是nil, i 是 0 ,j 是1 返回值是0
看两个一起的:
local test1 = {[1] = 1 , [2] = 2 ,[4] = 4 ,[6] = 6}
print(#test1)
local test1 = {[1] = 1, [2] = 2 ,[5] = 5 ,[6] = 6}
print(#test1)
两个的输出结果是6和2 ,而且要是将第一个打印出来 是1 2 3 4 nil 6 中间差一个就能打出来后面的,差两个就不行了 why?
就是因为上面源码中得算法。
举个例子
local test1 = {[1] = 1 , [2] = 2, [3] = 3 ,[4] = 4 ,[6] = 6}
第一个while循环结束, i == 4 ,j == 8, 通过下面的折半查找(具体细节还是拿笔算下吧。。。) 最后i == 6了
而local test1 = {[1] = 1, [2] = 2 ,[5] = 5 ,[6] = 6}
第一个while循环后, i == 2 , j == 4 , 折半查找后 i == 2
恩 就是这样了,如果不清楚这个的话,那么在实际操作的时候,会遇到很奇怪的问题而浪费大量时间。。。。
最后local test1 = { [‘a’] = 1, [‘b’] = 2 ,[‘c’] = 3}
print(#test1)
打印结果: 0 key必须是整形才能用#取。
其他取数组长度形式
如果是字符串或者其他形式的,还是采用循环pairs这种形式去取为好
- lua中关于取长度问题
- lua中关于取长度问题
- lua “#”取长度问题
- lua中关于随机数取值问题
- Lua table取长度
- lua中求table长度问题
- Lua中获取table长度问题探讨
- LUA中table表长度问题
- lua中获取table长度的问题
- lua的table长度问题
- lua的table长度问题
- lua的table长度问题
- lua table的长度问题
- lua中关于继承的问题
- lua中求table长度
- lua中求table长度
- 关于ORACLE中取星期的问题
- 关于Oracle中取时间问题
- oracle---添加空间索引
- 设计模式-9-桥接模式
- 青蛙跳台阶
- 网络的基本设定
- opencv3.2.0在vs2015,2017中的环境配置
- lua中关于取长度问题
- How to write a good design document for peer engineers (如何写一份给工程师看的技术文档)
- android NDK如何解决Please define the NDK_PROJECT_PATH variable to point to it
- 图解FTP的主动模式与被动模式以及客户端设置
- Android Things:外设I/O接口-GPIO
- 【C++】对象模型
- 三维迷宫
- Android 程序以及在4.4.4以上报错但是在4.4.4以上不报错
- 二叉堆