CE6870 添加ipv6 策略路由失败问题解决
来源:互联网 发布:淘宝活动第三方平台 编辑:程序博客网 时间:2024/06/06 08:25
CE6870 添加ipv6 策略路由失败问题解决
问题
acl ipv6 number 3050 rule 5 permit ipv6 destination FC00::7001:0/118#traffic classifier k_c1 type or if-match ipv6 acl 3050#traffic behavior k_b1 redirect ipv6 nexthop FC00::48:174#traffic policy k_p1 classifier k_c1 behavior k_b1 precedence 5#interface Eth-Trunk13 undo portswitch ipv6 enable ip address 60.1.40.1 255.255.255.0 ipv6 address FC00::1/112 traffic-policy k_p1 inbound #display traffic-policy applied-record Total records : 1-------------------------------------------------------------------------------Policy Type/Name Apply Parameter Slot State-------------------------------------------------------------------------------k_p1 Eth-Trunk13 inbound 1 fail(4) -------------------------------------------------------------------------------Fail reason: 4 -- Insufficient ACL resources.Error: Failed to apply the traffic policy k_p1 on slot 1. To check the cause, run the display traffic-policy applied-record command.# display version Huawei Versatile Routing Platform SoftwareVRP (R) software, Version 8.120 (CE6870EI V200R001C00SPC700)Copyright (C) 2012-2016 Huawei Technologies Co., Ltd.HUAWEI CE6870-48S6CQ-EI uptime is 0 day, 1 hour, 7 minutes Patch Version: V200R001SPH007
添加ipv6
策略路由失败,报Insufficient ACL resources
同样版本的另外一台CE6870
就没有问题
解决
在尝试N次后,手动编辑一个CE6870
的配置,清空所有,只保留管理口配置. 通过ftp get
引用后重启,居然解决了。 只是仍未发现问题在哪里。-_-
ftp get host-ip x.x.x.x username xxxx soure xx.cfgstartup saved-configuration xx.cfgreboot
配置
#sysname HUAWEI#device board 1 board-type CE6870-48S6CQ-EI#drop-profile default#dcb pfc#dcb ets-profile default#undo anti-attack abnormal enableundo anti-attack fragment enableundo anti-attack icmp-flood enableundo anti-attack tcp-syn enableundo anti-attack udp-flood enable#arp learning strict#telnet ipv6 server disable#observe-port 1 interface 10GE1/0/31 #diffserv domain default# # authentication-scheme default # authorization-scheme default # accounting-scheme default # domain default # domain default_admin#stack#interface MEth0/0/0 ip address 192.168.1.243 255.255.255.0#interface 10GE1/0/1 device transceiver 10GBASE-FIBER#interface 10GE1/0/2 device transceiver 10GBASE-FIBER#interface 10GE1/0/3#interface 10GE1/0/4#interface 10GE1/0/5 device transceiver 10GBASE-FIBER#interface 10GE1/0/6 device transceiver 10GBASE-FIBER#interface 10GE1/0/7 device transceiver 10GBASE-FIBER#interface 10GE1/0/8 device transceiver 10GBASE-FIBER#interface 10GE1/0/9#interface 10GE1/0/10#interface 10GE1/0/11 device transceiver 10GBASE-FIBER#interface 10GE1/0/12#interface 10GE1/0/13#interface 10GE1/0/14#interface 10GE1/0/15 device transceiver 10GBASE-FIBER#interface 10GE1/0/16 device transceiver 10GBASE-FIBER#interface 10GE1/0/17 device transceiver 10GBASE-FIBER#interface 10GE1/0/18 device transceiver 10GBASE-FIBER#interface 10GE1/0/19 device transceiver 1000BASE-X#interface 10GE1/0/20 device transceiver 1000BASE-X#interface 10GE1/0/21 device transceiver 10GBASE-FIBER#interface 10GE1/0/22 device transceiver 10GBASE-FIBER#interface 10GE1/0/23 device transceiver 10GBASE-FIBER#interface 10GE1/0/24 device transceiver 10GBASE-FIBER#interface 10GE1/0/25 device transceiver 10GBASE-FIBER#interface 10GE1/0/26 device transceiver 10GBASE-FIBER#interface 10GE1/0/27 device transceiver 10GBASE-FIBER#interface 10GE1/0/28 device transceiver 10GBASE-FIBER#interface 10GE1/0/29 device transceiver 10GBASE-FIBER#interface 10GE1/0/30 device transceiver 10GBASE-FIBER#interface 10GE1/0/31 device transceiver 10GBASE-FIBER#interface 10GE1/0/32 device transceiver 1000BASE-X#interface 10GE1/0/33 device transceiver 10GBASE-FIBER#interface 10GE1/0/34#interface 10GE1/0/35 device transceiver 10GBASE-FIBER#interface 10GE1/0/36 loopback-detect enable#interface 10GE1/0/37 device transceiver 10GBASE-FIBER#interface 10GE1/0/38#interface 10GE1/0/39 device transceiver 10GBASE-FIBER#interface 10GE1/0/40 device transceiver 10GBASE-FIBER#interface 10GE1/0/41#interface 10GE1/0/42 device transceiver 10GBASE-FIBER#interface 10GE1/0/43 device transceiver 10GBASE-FIBER#interface 10GE1/0/44 device transceiver 10GBASE-FIBER#interface 10GE1/0/45 device transceiver 10GBASE-FIBER#interface 10GE1/0/46 device transceiver 10GBASE-FIBER#interface 10GE1/0/47 device transceiver 10GBASE-FIBER#interface 10GE1/0/48 device transceiver 10GBASE-FIBER#interface 100GE1/0/1#interface 100GE1/0/2#interface 100GE1/0/3#interface 100GE1/0/4#interface 100GE1/0/5#interface 100GE1/0/6#interface NULL0#ssh authorization-type default aaa#vm-manager#return
阅读全文
0 0
- CE6870 添加ipv6 策略路由失败问题解决
- HUAWEI CE6870 IPv6 OSPFv3 配置
- linux内核 策略路由之添加
- suse系统下添加默认路由,网络路由,主机路由,策略路由
- node js- 路由转发和失败重试策略
- IPv6静态路由设置
- IPV6 路由设置
- IPv6 路由相关知识
- IPv6静态路由配置
- 策略路由
- 策略路由
- 策略路由
- 策略路由
- 策略路由
- 路由策略和策略路由
- 策略路由与路由策略
- Linux 路由 学习笔记 之六 策略规则的添加
- 更换ip或者添加路由后ssh失败
- fork仓库流程
- KMP
- zabbix 配置邮件报警
- uva 10655 Contemplation! Algebra(矩阵快速幂)
- centos7.2 安装poco
- CE6870 添加ipv6 策略路由失败问题解决
- 2017-8-16考试题
- 调用第三方接口~支付宝
- extjs-添加对应的组件
- [编程题] 独立的小易
- C++入门(作为大概了解)
- python 循环
- iOS NSdata 与 NSString,Byte数组,UIImage 的相互转换
- 一个继承JFrame的类调用一个继承JPanel的类,继承JPanel中的定义JPanel不显示