poll机制实例参考
来源:互联网 发布:淘宝u站怎么进入 编辑:程序博客网 时间:2024/05/16 10:39
poll机制:为了减少CPU资源的占用率,在编写驱动函数中添加poll机制
select,poll,epoll都是IO多路复用的机制。I/O多路复用就通过一种机制,可以监视多个描述符,一旦某个描述符就绪(一般是读就绪或者写就绪),能够通知程序进行相应的读写操作。
POLL:应用程序在一定时间内没有事件发生回返回来执行其它下面函数
先说poll,poll或select为大部分Unix/Linux程序员所熟悉,这俩个东西原理类似,性能上也不存在明显差异,但select对所监控的文件描述符数量有限制,所以这里选用poll做说明。
poll是一个系统调用,其内核入口函数为sys_poll,sys_poll几乎不做任何处理直接调用do_sys_poll,do_sys_poll的执行过程可以分为三个部分:
1,将用户传入的pollfd数组拷贝到内核空间,因为拷贝操作和数组长度相关,时间上这是一个O(n)操作,这一步的代码在do_sys_poll中包括从函数开始到调用do_poll前的部分。
2,查询每个文件描述符对应设备的状态,如果该设备尚未就绪,则在该设备的等待队列中加入一项并继续查询下一设备的状态。查询完所有设备后如果没有一个设备就绪,这时则需要挂起当前进程等待,直到设备就绪或者超时,挂起操作是通过调用schedule_timeout执行的。设备就绪后进程被通知继续运行,这时再次遍历所有设备,以查找就绪设备。这一步因为两次遍历所有设备,时间复杂度也是O(n),这里面不包括等待时间。相关代码在do_poll函数中。
3,将获得的数据传送到用户空间并执行释放内存和剥离等待队列等善后工作,向用户空间拷贝数据与剥离等待队列等操作的的时间复杂度同样是O(n),具体代码包括do_sys_poll函数中调用do_poll后到结束的部分。
poll实现步骤:
1、在驱动函数file_operation结构体上添加一个.poll函数,然后在函数里执行poll_wait,这个函数用来判断硬件事件是否发生
2、测试程序需要调用ret = poll(fds, 1, 5000)函数来获取事件发生信息。
比如一个按键事件:
1、查询方法:一直在查询,不断去查询是否有事件发生,整个过程都是占用CPU资源,消耗CPU资源非常打。
2、中断方式:当有事件发生时,就去跳转到相应事件去处理,CPU占用时间少。
3、poll方式: 中断方式虽然占用CPU资源少,但是在应用程序上需要不断在死循环里面执行读取函数,应用程序不能去做其它事情。poll机制解决了这个问题,当有事件发生时,才去执行读read函数,按键事件没有按下时,超过时间后返回,去执行其它的处理函数。
以下为poll按键事件的例子:
forth_drv.c:
#include <linux/module.h>#include <linux/kernel.h>#include <linux/fs.h>#include <linux/init.h>#include <linux/delay.h>#include <linux/irq.h>#include <asm/uaccess.h>#include <asm/irq.h>#include <asm/io.h>#include <asm/arch/regs-gpio.h>#include <asm/hardware.h>#include <linux/poll.h>static struct class *forthdrv_class;static struct class_device *forthdrv_class_dev;volatile unsigned long *gpfcon;volatile unsigned long *gpfdat;volatile unsigned long *gpgcon;volatile unsigned long *gpgdat;static DECLARE_WAIT_QUEUE_HEAD(button_waitq);/* 中断事件标志, 中断服务程序将它置1,forth_drv_read将它清0 */static volatile int ev_press = 0;struct pin_desc{ unsigned int pin; unsigned int key_val;};/* 键值: 按下时, 0x01, 0x02, 0x03, 0x04 *//* 键值: 松开时, 0x81, 0x82, 0x83, 0x84 */static unsigned char key_val;struct pin_desc pins_desc[4] = { {S3C2410_GPF0, 0x01}, {S3C2410_GPF2, 0x02}, {S3C2410_GPG3, 0x03}, {S3C2410_GPG11, 0x04},};/* * 确定按键值 */static irqreturn_t buttons_irq(int irq, void *dev_id){ struct pin_desc * pindesc = (struct pin_desc *)dev_id; unsigned int pinval; pinval = s3c2410_gpio_getpin(pindesc->pin); if (pinval) { /* 松开 */ key_val = 0x80 | pindesc->key_val; } else { /* 按下 */ key_val = pindesc->key_val; } ev_press = 1; /* 表示中断发生了 */ wake_up_interruptible(&button_waitq); /* 唤醒休眠的进程 */ return IRQ_RETVAL(IRQ_HANDLED);}static int forth_drv_open(struct inode *inode, struct file *file){ /* 配置GPF0,2为输入引脚 */ /* 配置GPG3,11为输入引脚 */ request_irq(IRQ_EINT0, buttons_irq, IRQT_BOTHEDGE, "S2", &pins_desc[0]); request_irq(IRQ_EINT2, buttons_irq, IRQT_BOTHEDGE, "S3", &pins_desc[1]); request_irq(IRQ_EINT11, buttons_irq, IRQT_BOTHEDGE, "S4", &pins_desc[2]); request_irq(IRQ_EINT19, buttons_irq, IRQT_BOTHEDGE, "S5", &pins_desc[3]); return 0;}ssize_t forth_drv_read(struct file *file, char __user *buf, size_t size, loff_t *ppos){ if (size != 1) return -EINVAL; /* 如果没有按键动作, 休眠 */ wait_event_interruptible(button_waitq, ev_press); /* 如果有按键动作, 返回键值 */ copy_to_user(buf, &key_val, 1); ev_press = 0; return 1;}int forth_drv_close(struct inode *inode, struct file *file){ free_irq(IRQ_EINT0, &pins_desc[0]); free_irq(IRQ_EINT2, &pins_desc[1]); free_irq(IRQ_EINT11, &pins_desc[2]); free_irq(IRQ_EINT19, &pins_desc[3]); return 0;}static unsigned forth_drv_poll(struct file *file, poll_table *wait){ unsigned int mask = 0; poll_wait(file, &button_waitq, wait); // 不会立即休眠 if (ev_press) mask |= POLLIN | POLLRDNORM; return mask;}static struct file_operations sencod_drv_fops = { .owner = THIS_MODULE, /* 这是一个宏,推向编译模块时自动创建的__this_module变量 */ .open = forth_drv_open, .read = forth_drv_read, .release = forth_drv_close, .poll = forth_drv_poll,};int major;static int forth_drv_init(void){ major = register_chrdev(0, "forth_drv", &sencod_drv_fops); forthdrv_class = class_create(THIS_MODULE, "forth_drv"); forthdrv_class_dev = class_device_create(forthdrv_class, NULL, MKDEV(major, 0), NULL, "buttons"); /* /dev/buttons */ gpfcon = (volatile unsigned long *)ioremap(0x56000050, 16); gpfdat = gpfcon + 1; gpgcon = (volatile unsigned long *)ioremap(0x56000060, 16); gpgdat = gpgcon + 1; return 0;}static void forth_drv_exit(void){ unregister_chrdev(major, "forth_drv"); class_device_unregister(forthdrv_class_dev); class_destroy(forthdrv_class); iounmap(gpfcon); iounmap(gpgcon); return 0;}module_init(forth_drv_init);module_exit(forth_drv_exit);MODULE_LICENSE("GPL");
forthdrvtest.c:
#include <sys/types.h>#include <sys/stat.h>#include <fcntl.h>#include <stdio.h>#include <poll.h>/* forthdrvtest */int main(int argc, char **argv){ int fd; unsigned char key_val; int ret; struct pollfd fds[1]; fd = open("/dev/buttons", O_RDWR); if (fd < 0) { printf("can't open!\n"); } fds[0].fd = fd; fds[0].events = POLLIN; while (1) { ret = poll(fds, 1, 5000); if (ret == 0) { printf("time out\n"); } else { r fvbbfdfnb gb' fdd b'b'bbfvdv'v cv' v' df'd'ead(fd, &key_val, 1); printf("key_val = 0x%x\n", key_val); } } return 0;}
- poll机制实例参考
- globalfifo驱动实例(poll机制)
- Poll机制
- poll机制
- poll 机制
- poll机制
- Poll机制
- poll机制
- poll实例
- linux select与poll实现机制与实例分析
- Android反射机制实例参考(转载)
- poll select 机制
- poll机制分析
- poll机制分析[转载]
- poll机制分析
- linux poll工作机制
- Linux poll机制分析
- poll机制分析
- 正则表达式随笔小记(一)
- Hbase原理、基本概念、基本架构
- vim配置及插件安装管理(超级详细)
- hdu 4937 Lucky Number 数学(进制转换)
- 8-16 DAIRY
- poll机制实例参考
- Android使用异步任务下载图片
- HPUoj 1183: 线代 ( 矩阵快速幂
- 2017 多校7场 hdu6129 蜜汁规律
- PreambleLength以及PLCPHeaderLength
- 字符串相乘
- springmvc的执行流程详解
- 网易编程题 疯狂队列
- 502 Server dropped connection