FTTH Fiber Drop Cable—Indoor&Outdoor Applications

As an access to providing high-speed Internet speed, Fiber to the home (FTTH) has been highly favored in recent years. It can achieve high-speed and long distance transmission, from a central point directly to individual buildings such as residences, apartment buildings and businesses through installation and use of optical fiber. FTTH drop cable plays a prominent role during this process. So what is FTTH drop cable? And how to install? This article would provide a satisfied answer for you.

About FTTH Drop Cable

FTTH drop cable contains 1 to 4 colored singlemode optical fibers with 250 µm individually, which provides a good solution for fiber to the home last mile solution. The cable contains two Fibre Reinforced Plastic (FRP) strength members and Low Smoke Zero Halogen (LSZH) jacket with nominal dimension 2 x 3 mm. They are fully meet the RoHS standards. With its small diameter, light weight and special structure, it is easy to use, to handle and to pull the fibers out from the cables. It is an ideal option for direct installation into the houses.

Features&Benefits

• Choice of fibre types
• Individually coloured optical fibres
• Notched 2 x 3 mm construction for easy stripping
• Singlemode optical fibre meeting ITU-T G.657A1 or ITU-T G.657A2 standard

How to Choose Right LSZH Jacket?

You can choose white LSZH jacket for indoor use and black LSZH jacket for outdoor use within short distance. For the white cables that are installed where they may be in direct sunlight for extended periods of time will need to be replaced more often. So we need to pick black LSZH jacket for they are UV-resistant.

Indoor And Outdoor Applications

There are mainly three applications of FTTH drop cables: internal FTTH applications horizontal and riser, clipping to surfaces including skirting boards, and short distance external use with black LSZH jacket. Due to time and space limiting, this article would mainly introduce the internal horizontal and riser cabling for FTTH applications, which attach great importance to FTTH cabling.

Horizontal Cabling

Drop cable all dielectric for Fibre To The Home (FTTH or FTTx) application, this means we need intrabuilding conduit. Conduit can be made of metallic tubing or rigid polyvinyl-chloride plastic. Conduit runs should be limited to 100 feet, with no more than two 90-degree bends between pull points or boxes. It runs can be in ceilings or walls or under floors.

To apply the FTTH fiber drop cable, we need pull boxes. They are installed for fishing the run and looping the cable for the next length of conduit. Pull boxes are not used for splicing cable. Fish tapes or pull cords should always be placed in the conduit to ease installation. Inner duct is an excellent tool for protecting cable and easing future installations.

Riser Cabling

Drop optical fiber cables intended for vertical applications have a calculated maximum vertical rise value assigned to them. The vertical rise is the distance the cable may be pulled vertically before being supported. It is determined by the weight of the cable and its ability to resist buckling or kinking.

You can use split wire mesh grips to pull cable vertically. The device works like basket or finger grips, supporting the cable without crushing the core. Cables should be supported by cable ties, straps or clamps in wiring closets. Whenever possible, begin the installation from the top, allowing the weight of the cable to help the pull rather than adding more load.

Conclusion

FTTH dramatically and unprecedentedly increases the connection speeds available to computer users. FTTH drop optical cable is a special cable that provide a perfect solution for FTTH transmission. The article mainly discussed its definition, benefits and applications. If you need this kind of fiber cable, you can take FS a try. We offer FTTH fiber drop cable with high quality but low cost. For more details, please visit www.fs.com.