Ubuntu 16.04 And CentOS 7 Install Docker

Ubuntu Install Docker

1.系統要求

64bit操作系統，內核版本至少爲3.10。

爲了讓Docker使用AUFS存儲，推薦安裝linux-image-extra。CentOS使用的是DeviceMapper.
$ sudo apt-get install -y linux-image-extra-$(uname -r)
執行以上安裝命令，報錯如下：

Reading package lists... DoneBuilding dependency tree       Reading state information... Donelinux-image-extra-4.10.0-32-generic is already the newest version (4.10.0-32.36~16.04.1).The following packages were automatically installed and are no longer required:  linux-headers-4.8.0-36 linux-headers-4.8.0-36-generic linux-image-4.8.0-36-generic linux-image-extra-4.8.0-36-genericUse 'sudo apt autoremove' to remove them.0 upgraded, 0 newly installed, 0 to remove and 178 not upgraded.3 not fully installed or removed.After this operation, 0 B of additional disk space will be used.Setting up linux-image-extra-4.10.0-32-generic (4.10.0-32.36~16.04.1) ...run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.10.0-32-generic /boot/vmlinuz-4.10.0-32-genericrun-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.10.0-32-generic /boot/vmlinuz-4.10.0-32-genericupdate-initramfs: Generating /boot/initrd.img-4.10.0-32-genericW: Possible missing firmware /lib/firmware/i915/kbl_dmc_ver1_01.bin for module i915gzip: stdout: No space left on deviceE: mkinitramfs failure find 141 cpio 141 gzip 1update-initramfs: failed for /boot/initrd.img-4.10.0-32-generic with 1.run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1dpkg: error processing package linux-image-extra-4.10.0-32-generic (--configure): subprocess installed post-installation script returned error exit status 1dpkg: dependency problems prevent configuration of linux-image-generic-hwe-16.04: linux-image-generic-hwe-16.04 depends on linux-image-extra-4.10.0-32-generic; however:  Package linux-image-extra-4.10.0-32-generic is not configured yet.dpkg: error processing package linux-image-generic-hwe-16.04 (--configure): dependency problems - leaving unconfigureddpkg: dependency problems prevent configuration of linux-generic-hwe-16.04: linux-generic-hwe-16.04 depends on linux-image-generic-hwe-16.04 (= 4.10.0.32.34); however:  Package linux-image-generic-hwe-16.04 is not configured yet.dpkg: error processing package linux-generic-hwe-16.04 (--configure): dependency problems - leaving unconfiguredNo apport report written because the error message indicates its a followup error from a previous failure.                                                                                                          No apport report written because the error message indicates its a followup error from a previous failure.                                       Errors were encountered while processing: linux-image-extra-4.10.0-32-generic linux-image-generic-hwe-16.04 linux-generic-hwe-16.04E: Sub-process /usr/bin/dpkg returned an error code (1)

解決方法：
$ sudo ap-get autoremove

然後重新執行安裝命令:

$ sudo apt-get install -y linux-image-extra-$(uname -r)Reading package lists... DoneBuilding dependency tree       Reading state information... Donelinux-image-extra-4.10.0-32-generic is already the newest version (4.10.0-32.36~16.04.1).0 upgraded, 0 newly installed, 0 to remove and 178 not upgraded.

2.添加鏡像源

首先安裝apt-transport-https包以支持HTTPS協議：

$ sudo apt-get install -y apt-transport-httpsReading package lists... DoneBuilding dependency tree       Reading state information... Doneapt-transport-https is already the newest version (1.2.24).0 upgraded, 0 newly installed, 0 to remove and 178 not upgraded.

添加源的gpg密鑰

$ sudo apt-key adv --keyserver hkp://p80.pool.sks-keyservers.net:80 --recv-keys 58118E89F3A912897C070ADBF76221572C52609DExecuting: /tmp/tmp.Ly3pzwSQtG/gpg.1.sh --keyserverhkp://p80.pool.sks-keyservers.net:80--recv-keys58118E89F3A912897C070ADBF76221572C52609Dgpg: requesting key 2C52609D from hkp server p80.pool.sks-keyservers.netgpg: key 2C52609D: public key "Docker Release Tool (releasedocker) <[e-mail]>" importedgpg: Total number processed: 1gpg:               imported: 1  (RSA: 1)

獲取當前操作系統的代號：

$ lsb_release -cCodename:   xenial

一般情況下，12.04(LTS)代號爲precise，14.04（LTS）爲trusty，15.04爲ivid，15.10爲wily。
此處爲xenial。

接下來添加Docker的官方apt軟件源,創建文件，並寫入源的地址內容:
$ sudo touch /etc/apt/sources.list.d/docker.list

$ cat /etc/apt/sources.list.d/docker.listdeb https://apt.dockerproject.org/repo ubuntu-xenial main

Ubuntu version Repository Precise 12.04 deb https://apt.dockerproject.org/repo ubuntu-precise main Trusty 14.04 deb https://apt.dockerproject.org/repo ubuntu-trusty main Xenial 16.04 deb https://apt.dockerproject.org/repo ubuntu-xenial main

更新apt軟件包緩存:
$ sudo apt-get update

3.安裝Docker

$ sudo apt-get install -y docker-engine

安裝完成之後查看docker服務狀態：

$ sudo systemctl status docker.service● docker.service - Docker Application Container Engine   Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled   Active: active (running) since Fri 2017-08-18 15:11:32 CST; 1min 10s ago     Docs: https://docs.docker.com Main PID: 17393 (dockerd)   CGroup: /system.slice/docker.service           ├─17393 /usr/bin/dockerd -H fd://           └─17422 docker-containerd -l unix:///var/run/docker/libcontainerd/docker-coAug 18 15:11:32 Guiwang dockerd[17393]: time="2017-08-18T15:11:32.514522054+08:00" levAug 18 15:11:32 Guiwang dockerd[17393]: time="2017-08-18T15:11:32.514593142+08:00" levAug 18 15:11:32 Guiwang dockerd[17393]: time="2017-08-18T15:11:32.514612318+08:00" levAug 18 15:11:32 Guiwang dockerd[17393]: time="2017-08-18T15:11:32.515014487+08:00" levAug 18 15:11:32 Guiwang dockerd[17393]: time="2017-08-18T15:11:32.667623200+08:00" levAug 18 15:11:32 Guiwang dockerd[17393]: time="2017-08-18T15:11:32.721589597+08:00" levAug 18 15:11:32 Guiwang dockerd[17393]: time="2017-08-18T15:11:32.888903127+08:00" levAug 18 15:11:32 Guiwang dockerd[17393]: time="2017-08-18T15:11:32.888968656+08:00" levAug 18 15:11:32 Guiwang dockerd[17393]: time="2017-08-18T15:11:32.909135681+08:00" levAug 18 15:11:32 Guiwang systemd[1]: Started Docker Application Container Engine.

看到‘Active: active (running)’，說明docker已經啓動。至此，安裝結束。

CentOS 7 Install Docker

首先添加yum軟件源：

sudo tee /etc/yum.repos.d/docker.repo << 'EOF'[dockerrepo]name=Docker Repositorybaseurl=https://yum.dockerproject.org/repo/main/centos/7/enabled=1gpgcheck=1gpgkey=https://yum.dockerproject.org/gpg

$ sudo yum update
$ sudo yum install -y docker-engine

對於CentOS 7系統，CentOS-Extras源中已內置Docker，如果已經配置了CentOS-Extras源，可以直接通過上面的yum命令進行安裝。

配置Docker服務

爲了避免使用docker命令都要用特權身份，可以將當前用戶加入安裝中自動創建的docker用戶組，重新登陸後生效：
$ sudo usermod -aG docker USER_NAME
從docker組中移除用戶:
$ sudo gpasswd -d USER_NAME docker

當然，也可以用創建別名的方式來使用docker，在.bashrc文件中追加：

# dkr爲別名名稱，可自行定義alias dkr='sudo docker'

Ubuntu下，Docker的默認配置文件爲/etc/default/docker, 服務管理腳本爲/etc/init.d/docker

對於CentOS/RedHat，可通過systemctl命令來管理Docker服務。

Linux下Docker代理配置

創建目錄/etc/systemd/system/docker.service.d ，並創建http-proxy.conf文件，輸入以下內容：

[Service]Environment="HTTP_PROXY=http://proxyServer:PORT"Environment="HTTPS_PROXY=http://proxyServer:PORT"

刷新配置：
sudo systemctl daemon-reload
重啓docker服務：
sudo systemctl restart docker

检查变量是否加载:
systemctl show docker --property Environment
或
systemctl show docker | grep Envir*