Centos7 管理防火墙的端口
来源:互联网 发布:c语言多重循环break 编辑:程序博客网 时间:2024/06/05 02:07
1、firewalld的基本使用
启动: systemctl start firewalld
查看状态: systemctl status firewalld
停止: systemctl disable firewalld
禁用: systemctl stop firewalld
2.systemctl是CentOS7的服务管理工具中主要的工具,它融合之前service和chkconfig的功能于一体。
启动一个服务:systemctl start firewalld.service
关闭一个服务:systemctl stop firewalld.service
重启一个服务:systemctl restart firewalld.service
显示一个服务的状态:systemctl status firewalld.service
在开机时启用一个服务:systemctl enable firewalld.service
在开机时禁用一个服务:systemctl disable firewalld.service
查看服务是否开机启动:systemctl is-enabled firewalld.service
查看已启动的服务列表:systemctl list-unit-files|grep enabled
查看启动失败的服务列表:systemctl --failed
3.配置firewalld-cmd
查看版本: firewall-cmd --version
查看帮助: firewall-cmd --help
显示状态: firewall-cmd --state
查看所有打开的端口: firewall-cmd --zone=public --list-ports
更新防火墙规则: firewall-cmd --reload
查看区域信息: firewall-cmd --get-active-zones
查看指定接口所属区域: firewall-cmd --get-zone-of-interface=eth0
拒绝所有包:firewall-cmd --panic-on
取消拒绝状态: firewall-cmd --panic-off
查看是否拒绝: firewall-cmd --query-panic
那怎么开启一个端口呢
添加
firewall-cmd --zone=public --add-port=80/tcp --permanent (--permanent永久生效,没有此参数重启后失效)
重新载入
firewall-cmd --reload
查看
firewall-cmd --zone= public --query-port=80/tcp
删除
firewall-cmd --zone= public --remove-port=80/tcp --permanent
启动: systemctl start firewalld
查看状态: systemctl status firewalld
停止: systemctl disable firewalld
禁用: systemctl stop firewalld
2.systemctl是CentOS7的服务管理工具中主要的工具,它融合之前service和chkconfig的功能于一体。
启动一个服务:systemctl start firewalld.service
关闭一个服务:systemctl stop firewalld.service
重启一个服务:systemctl restart firewalld.service
显示一个服务的状态:systemctl status firewalld.service
在开机时启用一个服务:systemctl enable firewalld.service
在开机时禁用一个服务:systemctl disable firewalld.service
查看服务是否开机启动:systemctl is-enabled firewalld.service
查看已启动的服务列表:systemctl list-unit-files|grep enabled
查看启动失败的服务列表:systemctl --failed
3.配置firewalld-cmd
查看版本: firewall-cmd --version
查看帮助: firewall-cmd --help
显示状态: firewall-cmd --state
查看所有打开的端口: firewall-cmd --zone=public --list-ports
更新防火墙规则: firewall-cmd --reload
查看区域信息: firewall-cmd --get-active-zones
查看指定接口所属区域: firewall-cmd --get-zone-of-interface=eth0
拒绝所有包:firewall-cmd --panic-on
取消拒绝状态: firewall-cmd --panic-off
查看是否拒绝: firewall-cmd --query-panic
那怎么开启一个端口呢
添加
firewall-cmd --zone=public --add-port=80/tcp --permanent (--permanent永久生效,没有此参数重启后失效)
重新载入
firewall-cmd --reload
查看
firewall-cmd --zone= public --query-port=80/tcp
删除
firewall-cmd --zone= public --remove-port=80/tcp --permanent
阅读全文
0 0
- Centos7 管理防火墙的端口
- centos7防火墙端口的开启
- CentOS7 NFS 服务器防火墙的端口设置
- Centos7 防火墙开放端口
- centos7 开放防火墙端口
- centos7防火墙开放端口
- CentOS7防火墙放行端口
- centos7开启防火墙端口
- CentOS7 防火墙 开放端口
- CentOS7防火墙管理firewalld
- CentOS7防火墙管理firewalld
- CentOS7防火墙管理firewalld
- centos7 防火墙管理
- Centos7.1防火墙开放端口
- Centos7.1防火墙开放端口
- Centos7 关闭防火墙,过滤端口
- centos7防火墙开放80端口
- Centos7,配置防火墙,开启端口
- 【转载】Java包(package)的命名规范,java中package命名规则
- 对一个deb包的解压、修改、重新打包全过程方法
- C++ 输入输出流和文件输入输出流
- python再复习(4)高级特性、函数式编程以及用法小结
- UVA
- Centos7 管理防火墙的端口
- luinx session文件,laravel 清空session
- 一般报java.lang.NullPointerException的原因有以下几种
- 利用WHID为隔离主机建立隐秘通道
- TextView 代码实现drawableRight
- apache common logging和log4j区别 2016-11-01 21:01 711人阅读 评论(0) 收藏 举报 Apache common logging是一种log的框架接口,
- 使用Maven搭建SpringMVC
- LeetCode | 77. Combinations
- java后台利用正则过滤js代码