getWidth和getMeasureWidth区别
来源:互联网 发布:mac怎么分盘储存文件 编辑:程序博客网 时间:2024/06/06 03:07
一。也許很多童鞋對getWidth()和getMeasuredWidth()的用法有很多的不解,這兩者之間有什麼樣的不同呢,網上也有各種不同的版本,但大多數都大同小異,從這個地方Ctrl+C,到另一個地方Ctrl+V,沒有把問題說透,也有一部分文章誤導了大家對這兩個方法的認識,我也是深受其害。這裡先糾正下面的一個版本的說法,Baidu上一搜一大堆的,可惜這種說法是錯的,所以希望大家就不要再盲目的轉載到你的空間裡:
getWidth得到是某个view的实际尺寸.
getMeasuredWidth是得到某view想要在parent view里面占的大小.
想必你也見過這樣的解釋,聽起來這樣的解釋也似雲裡霧裡,沒有把問題點透。
二。好了,錯誤的版本就不過多說了,下面對這兩個方法做一下正解,首先大家應先知道以下幾點:
1. 在一個類初始化時,即在構造函數當中我們是得不到View的實際大小的。感興趣的朋友可以試一下,getWidth()和getMeasuredWidth()得到的結果都是0.但是我們可以從onDraw()方法裡面得到控件的大小。
2. 這兩個方法所得到的結果的單位是像素即pixel.
對兩個方法做介紹:
getWidth(): 得到的是view在父Layout中佈局好後的寬度值,如果沒有父佈局,那麼默認的父佈局是整個屏幕。也許不好理解。通過一個例子來說明一下。
例1 :
這裡是在LinearLayout裡添加一個TextView控件,如果此時要得到對TextView獲取getWidth(),那麼是在TextView添加到Layout後再去獲取值,並不單單的是對TextView本身寬度的獲取。
getMeasuredWidth():先看一下API裡面怎麼說的
The width of this view as measured in the most recent call to measure(). This should be used during measurement and layout calculations only.
得到的是在最近一次調用measure()方法測量後得到的view的寬度,它僅僅用在測量和layout的計算中。
所以此方法得到的是view的內容佔據的實際寬度。
你如果想從一個最簡單的例子中的到它們的不同,下面將對上面的例子做一下修改:
總結(正解):
getWidth(): View在設定好佈局後整個View的寬度。
getMeasuredWidth(): 對View上的內容進行測量後得到的View內容佔據的寬度,前提是你必須在父佈局的onLayout()方法或者此View的onDraw()方法裡調用measure(0,0);(measure 參數的值你可以自己定義),否則你得到的結果和getWidth()得到的結果一樣。
也許我組織的不是很好,大家有什麼不清楚的地方再給我留言。關於這兩個方法的區別就是看你有沒有用measure()方法,當然measure()的位置也是很重要的。
getWidth得到是某个view的实际尺寸.
getMeasuredWidth是得到某view想要在parent view里面占的大小.
想必你也見過這樣的解釋,聽起來這樣的解釋也似雲裡霧裡,沒有把問題點透。
二。好了,錯誤的版本就不過多說了,下面對這兩個方法做一下正解,首先大家應先知道以下幾點:
1. 在一個類初始化時,即在構造函數當中我們是得不到View的實際大小的。感興趣的朋友可以試一下,getWidth()和getMeasuredWidth()得到的結果都是0.但是我們可以從onDraw()方法裡面得到控件的大小。
2. 這兩個方法所得到的結果的單位是像素即pixel.
對兩個方法做介紹:
getWidth(): 得到的是view在父Layout中佈局好後的寬度值,如果沒有父佈局,那麼默認的父佈局是整個屏幕。也許不好理解。通過一個例子來說明一下。
例1 :
- public class Test extends Activity {
- private LinearLayout mBackgroundLayout;
- private TextViewTest mTextViewTest;
- /** Called when the activity is first created. */
- @Override
- public void onCreate(Bundle savedInstanceState) {
- super.onCreate(savedInstanceState);
- mBackgroundLayout = new MyLayout(this);
- mBackgroundLayout.setLayoutParams(new LinearLayout.LayoutParams(
- LinearLayout.LayoutParams.FILL_PARENT,
- LinearLayout.LayoutParams.FILL_PARENT));
- mTextViewTest = new TextViewTest(this);
- mBackgroundLayout.addView(mTextViewTest);
- setContentView(mBackgroundLayout);
- }
- public class MyLayout extends LinearLayout{
- public MyLayout(Context context) {
- super(context);
- // TODO Auto-generated constructor stub
- }
- @Override
- protected void onLayout(boolean changed, int l, int t, int r, int b) {
- // TODO Auto-generated method stub
- super.onLayout(changed, l, t, r, b);
- Log.i("Tag", "--------------");
- View mView=getChildAt(0);
- mView.measure(0, 0);
- }
- }
- public class TextViewTest extends TextView {
- public TextViewTest(Context context) {
- super(context);
- // TODO Auto-generated constructor stub
- setText("test test ");
- }
- @Override
- protected void onDraw(Canvas canvas) {
- // TODO Auto-generated method stub
- super.onDraw(canvas);
- // measure(0, 0);
- Log.i("Tag", "width: " + getWidth() + ",height: " + getHeight());
- Log.i("Tag", "MeasuredWidth: " + getMeasuredWidth()
- + ",MeasuredHeight: " + getMeasuredHeight());
- }
- }
- }
這裡是在LinearLayout裡添加一個TextView控件,如果此時要得到對TextView獲取getWidth(),那麼是在TextView添加到Layout後再去獲取值,並不單單的是對TextView本身寬度的獲取。
getMeasuredWidth():先看一下API裡面怎麼說的
The width of this view as measured in the most recent call to measure(). This should be used during measurement and layout calculations only.
得到的是在最近一次調用measure()方法測量後得到的view的寬度,它僅僅用在測量和layout的計算中。
所以此方法得到的是view的內容佔據的實際寬度。
你如果想從一個最簡單的例子中的到它們的不同,下面將對上面的例子做一下修改:
- public class Test extends Activity {
- private TextViewTest mTextViewTest;
- /** Called when the activity is first created. */
- @Override
- public void onCreate(Bundle savedInstanceState) {
- super.onCreate(savedInstanceState);
- mTextViewTest = new TextViewTest(this);
- setContentView(mTextViewTest);
- }
- public class TextViewTest extends TextView {
- public TextViewTest(Context context) {
- super(context);
- // TODO Auto-generated constructor stub
- setText("test test ");
- }
- @Override
- protected void onDraw(Canvas canvas) {
- // TODO Auto-generated method stub
- super.onDraw(canvas);
- measure(0, 0);
- Log.i("Tag", "width: " + getWidth() + ",height: " + getHeight());
- Log.i("Tag", "MeasuredWidth: " + getMeasuredWidth()
- + ",MeasuredHeight: " + getMeasuredHeight());
- }
- }
- }
總結(正解):
getWidth(): View在設定好佈局後整個View的寬度。
getMeasuredWidth(): 對View上的內容進行測量後得到的View內容佔據的寬度,前提是你必須在父佈局的onLayout()方法或者此View的onDraw()方法裡調用measure(0,0);(measure 參數的值你可以自己定義),否則你得到的結果和getWidth()得到的結果一樣。
也許我組織的不是很好,大家有什麼不清楚的地方再給我留言。關於這兩個方法的區別就是看你有沒有用measure()方法,當然measure()的位置也是很重要的。
阅读全文
0 0
- getWidth和getMeasureWidth区别
- 浅谈getWidth()和getMeasureWidth()区别
- 关于getRawX和getX、getMeasureWidth和getWidth之间的区别
- getWidth()与getMeasureWidth()的区别
- Android中getWidth()和getMeasureWidth()的区别探究
- android中getMeasureWidth()和getWidth()方法的区别
- Android自定义控件中getWidth()和getMeasureWidth()的区别
- [例证]浅谈getWidth()和getMeasureWidth()区别
- Android自定义控件中getWidth()和getMeasureWidth()的区别
- getWidth与getMeasureWidth
- getWidth() 和 getMeasuredWidth() 区别
- onLayout笔记(mTop,layout,setFrame,getMeasureWidth,getWidth)
- Android getWidth和getMeasuredWidth 区别
- getWidth() 和 getMeasuredWidth()的区别
- Android getWidth和getMeasuredWidth 区别
- getWidth和getMeausuredWidth的区别
- view getwidth() 和getMeasuredWidth()区别
- getwidth和getmeasuredwidth的区别
- WebRTC视频帧渲染前处理——视频帧裁剪
- leetcode1.Two Sum
- 算法第2篇——插入排序
- PullToRefreshListView原理解析(二)
- 字符串的连接,以及字符串大小写的转换
- getWidth和getMeasureWidth区别
- java Collections.sort()排序。List排序
- 用PL/SQL Developer创建Oracle触发器以及触发器的一点点知识与出现的问题
- Handlebars一些
- 普通按钮和图片按钮
- spring mvc运行原理
- spark mllib 的数据预处理
- 数字图像处理中结构元素、腐蚀、膨胀的基本概念。(转+源)
- 超声波测深仪工作原理