Nexus OSS私服仓库的备份与迁移
来源:互联网 发布:外贸邮箱软件 编辑:程序博客网 时间:2024/06/04 20:15
在上一篇博客 【Maven学习】Nexus OSS私服仓库的安装和配置 中,我们已经在机房搭建好了新的Nexus OSS私服仓库。下面是两个版本的Nexus OSS私服仓库的对比图。
老的Nexus OSS私服仓库
新的Nexus OSS私服仓库
明显老的Nexus OSS私服仓库的内容比新的Nexus OSS私服仓库的内容多。因此我们现在的工作就是将办公室上的老的Nexus服务器上的所有的数据迁移到机房的Nexus服务器。这一篇博客记录下整个Nexus OSS私服仓库的备份与迁移的过程。
一、老的Nexus OSS私服仓库备份
迁移中会遇到三个文件夹 , 打包、拉走 启动即可。
迁移流程如下
首先我们在老的Nexus OSS私服仓库的这台Linux服务器上,查看相关的目录信息。
如上图所示,在老的Nexus OSS私服仓库的这台Linux服务器上,
nexus主目录的地址为:/usr/local/nexus-2.12.1-01
在 /usr/local/nexus-2.12.1-01/config/nexus.properties 文件中,指定了sonatype-work的地址
现在我们进入 /usr/local/sonatype-work/nexus/storage目录,查看里面的目录结构
[root@kf1appsvr storage]# pwd/usr/local/sonatype-work/nexus/storage[root@kf1appsvr storage]# lltotal 52drwxr-xr-x 6 root root 4096 Dec 4 08:49 android-betadrwxr-xr-x 6 root root 4096 Dec 4 08:49 android-devdrwxr-xr-x 6 root root 4096 Dec 4 08:49 android-releasedrwxr-xr-x 6 root root 4096 Dec 4 08:49 android-snapshotsdrwxr-xr-x 10 root root 4096 Dec 4 08:49 android_publicdrwxr-xr-x 4 root root 4096 Dec 4 08:49 apache-snapshotsdrwxr-xr-x 30 root root 4096 Dec 4 08:49 centraldrwxr-xr-x 125 root root 4096 Nov 30 17:08 central-m1drwxr-xr-x 6 root root 4096 Dec 4 08:49 publicdrwxr-xr-x 4 root root 4096 Dec 4 08:49 releasesdrwxr-xr-x 4 root root 4096 Dec 4 08:49 snapshotsdrwxr-xr-x 5 root root 4096 Dec 4 08:49 thirdpartydrwxr-xr-x 2 root root 4096 Jan 11 2017 xtc_devs
将此目录结构和Nexus管理界面对比,可以一一对应,如下所示。
从上面分析来看,我们只需要将nexus主目录和sonatype-work目录都备份好即可。但是两个Linux服务器的nexus配置的java路径之类的可能不同,我就不备份nexus主目录了。
我只备份sonatype-work目录,Nexus的构件仓库都保存在sonatype-work目录中,该目录的位置由nexus/conf/nexus.properties配置文件指定。
使用 tar命令将 sonatype-work目录 打包压缩为一个 tar.gz文件,命令如下所示
[root@kf1appsvr local]# tar -zcvf sonatype-work-2017-12-14.tar.gz ./sonatype-work/
备份中,整个备份过程比较缓慢,因为两年传上去的的文件和文件夹太多了。
打包完毕
生成了 sonatype-work-2017-12-14.tar.gz 文件,占用了2770940709 字节,差不多2.6G
二、将老的Nexus OSS私服仓库的备份文件复制到新的Nexus OSS私服仓库
上一步我们将整个 sonatype-work 目录打包成一个压缩包 sonatype-work-2017-12-14.tar.gz,现在我们要将这个压缩包复制到新的Nexus OSS私服仓库的Linux服务器上。
我们是有 scp命令来进行复制操作,关于scp命令的操作可以参考之前的文章 git学习——> Gitlab如何进行备份恢复与迁移?
使用scp命令从远程服务器copy文件或者目录到本地
scp 用户名 @IP 地址 : 文件名 1 远程用户名 @IP 地址 : 文件名 2
[用户名 @IP 地址 :] 可以不输入 , 可能需要输入远程用户名所对应的密码 .
可能有用的几个参数 :
-v 和大多数 linux 命令中的 -v 意思一样 , 用来显示进度 . 可以用来查看连接 , 认证 , 或是配置错误 .
-C 使能压缩选项 .
-P 选择端口 . 注意 -p 已经被 rcp 使用 .
-4 强行使用 IPV4 地址 .
-6 强行使用 IPV6 地址 .
例如我使用如下命令,从远程服务器copy刚才的备份文件sonatype-work-2017-12-14.tar.gz到了新服务器的/usr/local 目录下
scp root@老的linux的ip地址:/usr/local/sonatype-work-2017-12-14.tar.gz /usr/local/
我们登录到新的Nexus OSS私服仓库那台linux服务器,然后执行上面的命令
敲了命令之后,需要我们确认是否connecting,我们敲一个yes,接着需要我们输入老的Nexus OSS私服仓库那台linux服务器的密码,如下所示
敲完之后,如果密码正确的话,则将刚才的备份文件copy到这台新的linux服务器。稍等一段时间之后则可以copy完毕,如下图所示:
真心尴尬,根目录 / 的磁盘空间用完了,导致复制过程终止,我们将这个复制到一半的文件删除掉。
我发现 /data2 的磁盘空间很充裕,因此我将文件复制到 /data2目录下,如下图所示
复制完毕之后,查看 /data2 目录,发现 复制过来的 sonatype-work-2017-12-14.tar.gz 文件也是 2770940709个字节,完整复制过来了。
三、解压备份文件
因为 根目录 / 下的磁盘空间不足,因此我们将刚才的压缩包解压到 /data2目录下。如下所示:
tar -zxvf sonatype-work-2017-12-14.tar.gz
解压过程
解压好后,会生成一个 sonatype-work目录。如下图所示:
四、还原仓库
因为我们新的Nexus OSS私服仓库之前制定的仓库地址为
[root@localhost local]# cd nexus-2.12.1-01/[root@localhost nexus-2.12.1-01]# ll总用量 40drwxr-xr-x 3 1001 1001 4096 12月 13 16:27 bindrwxr-xr-x 2 1001 1001 4096 12月 13 18:06 confdrwxr-xr-x 2 1001 1001 4096 12月 13 16:27 lib-rw-r--r-- 1 1001 1001 11006 3月 3 2016 LICENSE.txtdrwxr-xr-x 2 1001 1001 4096 12月 13 18:08 logsdrwxr-xr-x 4 1001 1001 4096 12月 13 16:27 nexus-rw-r--r-- 1 1001 1001 782 3月 3 2016 NOTICE.txtdrwxr-xr-x 5 1001 1001 4096 12月 13 18:08 tmp[root@localhost nexus-2.12.1-01]# pwd/usr/local/nexus-2.12.1-01[root@localhost nexus-2.12.1-01]# cat conf/nexus.properties ## Sonatype Nexus (TM) Open Source Version# Copyright (c) 2008-present Sonatype, Inc.# All rights reserved. Includes the third-party code listed at http://links.sonatype.com/products/nexus/oss/attributions.## This program and the accompanying materials are made available under the terms of the Eclipse Public License Version 1.0,# which accompanies this distribution and is available at http://www.eclipse.org/legal/epl-v10.html.## Sonatype Nexus (TM) Professional Version is available from Sonatype, Inc. "Sonatype" and "Sonatype Nexus" are trademarks# of Sonatype, Inc. Apache Maven is a trademark of the Apache Software Foundation. M2eclipse is a trademark of the# Eclipse Foundation. All other trademarks are the property of their respective owners.## Sonatype Nexus# ==============# This is the most basic configuration of Nexus.# Jetty sectionapplication-port=8081application-host=0.0.0.0nexus-webapp=${bundleBasedir}/nexusnexus-webapp-context-path=/nexus# Nexus sectionnexus-work=${bundleBasedir}/../sonatype-work/nexusruntime=${bundleBasedir}/nexus/WEB-INF[root@localhost nexus-2.12.1-01]#
现在我们将老的Nexus OSS私服仓库的备份仓库 解压到了 /data2目录下,因此我们需要修改nexus/conf/nexus.properties配置文件,重新指定仓库的目录为 /data2/sonatype-work/nexus
我们修改 /usr/local/nexus-2.12.1-01/conf/nexus.properties 文件
[root@localhost nexus]# vim /usr/local/nexus-2.12.1-01/conf/nexus.properties
修改后的配置文件如下所示
## Sonatype Nexus (TM) Open Source Version# Copyright (c) 2008-present Sonatype, Inc.# All rights reserved. Includes the third-party code listed at http://links.sonatype.com/products/nexus/oss/attributions.## This program and the accompanying materials are made available under the terms of the Eclipse Public License Version 1.0,# which accompanies this distribution and is available at http://www.eclipse.org/legal/epl-v10.html.## Sonatype Nexus (TM) Professional Version is available from Sonatype, Inc. "Sonatype" and "Sonatype Nexus" are trademarks# of Sonatype, Inc. Apache Maven is a trademark of the Apache Software Foundation. M2eclipse is a trademark of the# Eclipse Foundation. All other trademarks are the property of their respective owners.## Sonatype Nexus# ==============# This is the most basic configuration of Nexus.# Jetty sectionapplication-port=8081application-host=0.0.0.0nexus-webapp=${bundleBasedir}/nexusnexus-webapp-context-path=/nexus# Nexus section#nexus-work=${bundleBasedir}/../sonatype-work/nexus#新的地址为nexus-work=/data2/sonatype-work/nexusruntime=${bundleBasedir}/nexus/WEB-INF
五、重启Nexus
使用 /etc/init.d/nexus2 restart 命令 重启Nexus服务
[root@localhost nexus]# /etc/init.d/nexus2 Usage: /etc/init.d/nexus2 { console | start | stop | restart | status | dump }[root@localhost nexus]# /etc/init.d/nexus2 restart****************************************WARNING - NOT RECOMMENDED TO RUN AS ROOT****************************************Stopping Nexus OSS...Stopped Nexus OSS.Starting Nexus OSS...Started Nexus OSS.[root@localhost nexus]#
重启完后,刷新浏览器查看新的Nexus服务器,如下所示
对比下,老的Nexus服务器
除了IP地址不一样之外,其他的都一样,迁移成功!
测试了下之前在博客 【我的Android进阶之旅】快速创建和根据不同的版本类型(Dev、Beta、Release)发布Android 开发库到Maven私服 中写的Gradle脚本上传到新的Nexus服务器也是正常的!
参考链接
- http://blog.csdn.net/ouyang_peng/article/details/78793038
- http://blog.csdn.net/vbaspdelphi/article/details/52870530
- http://blog.csdn.net/kinglyjn/article/details/53585721
- http://blog.csdn.net/north_eagle/article/details/42428219
- http://blog.csdn.net/puregold1124/article/details/45690785
- http://blog.csdn.net/ouyang_peng/article/details/56872556
- Nexus OSS私服仓库的备份与迁移
- 【Maven学习】Nexus OSS私服仓库的备份与迁移
- 【Maven学习】Nexus OSS私服仓库的备份与迁移
- 【Maven学习】Nexus OSS私服仓库的备份与迁移
- 【Maven学习】Nexus OSS私服仓库的备份与迁移
- 【Maven学习】Nexus OSS私服仓库的备份与迁移
- Nexus OSS私服仓库的安装和配置
- Nexus OSS私服仓库的安装和配置以及与Maven整合配置
- Nexus OSS私服仓库的安装和配置以及与Maven整合配置
- maven 仓库 nexus 的安装与迁移
- 【Maven学习】Nexus OSS私服仓库的安装和配置
- nexus(Maven仓库私服)的安装、配置、使用和仓库迁移
- Nexus的仓库与仓库组
- 【Maven】Nexus(Maven仓库私服)下载与安装
- 【Maven】Nexus(Maven仓库私服)下载与安装
- 【Maven】Nexus(Maven仓库私服)下载与安装
- Nexus OSS的安装、使用
- nexus的私服的搭建(maven私有仓库)
- 仿今日头条——主页面F1+频道管理
- 【Ionic】Ionic自动计算时间+时间验证(Datatime,readonly,toFixed,parse)
- Flex 布局教程:语法篇
- ListView动态加载
- 论文笔记--Appearance-and-Relation Networks for Video Classification
- Nexus OSS私服仓库的备份与迁移
- ubuntu下 python 好用的IDE
- C++ 虚函数表解析
- IT与风投
- js 面试题总结
- 1小时掌握SVN版本控制系统
- 一文搞懂HMM(隐马尔可夫模型)
- Jupyter环境配置error
- sublime text3 xml格式化插件