PKU 1273 Drainage Ditches
来源:互联网 发布:车英制螺纹编程实例 编辑:程序博客网 时间:2024/05/18 23:24
Drainage Ditches
Time Limit: 1000MS Memory Limit: 10000KTotal Submissions: 21076 Accepted: 7554
Description
Every time it rains on Farmer John's fields, a pond forms over Bessie's favorite clover patch. This means that the clover is covered by water for awhile and takes quite a long time to regrow. Thus, Farmer John has built a set of drainage ditches so that Bessie's clover patch is never covered in water. Instead, the water is drained to a nearby stream. Being an ace engineer, Farmer John has also installed regulators at the beginning of each ditch, so he can control at what rate water flows into that ditch.
Farmer John knows not only how many gallons of water each ditch can transport per minute but also the exact layout of the ditches, which feed out of the pond and into each other and stream in a potentially complex network.
Given all this information, determine the maximum rate at which water can be transported out of the pond and into the stream. For any given ditch, water flows in only one direction, but there might be a way that water can flow in a circle.
Farmer John knows not only how many gallons of water each ditch can transport per minute but also the exact layout of the ditches, which feed out of the pond and into each other and stream in a potentially complex network.
Given all this information, determine the maximum rate at which water can be transported out of the pond and into the stream. For any given ditch, water flows in only one direction, but there might be a way that water can flow in a circle.
Input
The input includes several cases. For each case, the first line contains two space-separated integers, N (0 <= N <= 200) and M (2 <= M <= 200). N is the number of ditches that Farmer John has dug. M is the number of intersections points for those ditches. Intersection 1 is the pond. Intersection point M is the stream. Each of the following N lines contains three integers, Si, Ei, and Ci. Si and Ei (1 <= Si, Ei <= M) designate the intersections between which this ditch flows. Water will flow through this ditch from Si to Ei. Ci (0 <= Ci <= 10,000,000) is the maximum rate at which water will flow through the ditch.
Output
For each case, output a single integer, the maximum rate at which water may emptied from the pond.
Sample Input
5 41 2 401 4 202 4 202 3 303 4 10
Sample Output
50
Source
USACO 93
感谢ZZC大牛,感谢ZZC让我过了第一个SAP
#include<stdio.h>
#include<string.h>
#include<algorithm>
using namespace std;
int n,m;
int flow[210][210],dist[210]={0},gap[210]={0};
int find_way(int p,int limit=0x3f3f3f3f)
{
if(p==n-1) return limit;
for(int i=0;i<n;i++)
if(dist[p]==dist[i]+1 && flow[p][i]>0)
{
int t=find_way(i,min(limit,flow[p][i]));
if(t<0) return t;
if(t>0)
{
flow[p][i]-=t;
flow[i][p]+=t;
return t;
}
}
int label =n;//设置是为了不超过真实距离
for(int i=0;i<n;i++) if(flow[p][i]>0) label=min(label,dist[i]+1);
if(--gap[dist[p]] == 0 || dist[0] >= n) return -1;//为什么是大于等于
++gap[dist[p] = label];
return 0;
}
int sap()
{
gap[0]=n;
int t=0,maxflow=0;
while((t=find_way(0))>=0)
maxflow+=t;
return maxflow;
}
int main()
{
while(scanf("%d%d",&m,&n)!=EOF)
{
memset(flow,0,sizeof(flow));//悲剧,忘了
memset(gap,0,sizeof(gap));
memset(dist,0,sizeof(dist));
for(int i=0;i<m;i++)
{
int x,y,c;
scanf("%d%d%d",&x,&y,&c);
--x;--y;
flow[x][y]+=c;
}
printf("%d/n",sap());
}
return 0;
}
#include<string.h>
#include<algorithm>
using namespace std;
int n,m;
int flow[210][210],dist[210]={0},gap[210]={0};
int find_way(int p,int limit=0x3f3f3f3f)
{
if(p==n-1) return limit;
for(int i=0;i<n;i++)
if(dist[p]==dist[i]+1 && flow[p][i]>0)
{
int t=find_way(i,min(limit,flow[p][i]));
if(t<0) return t;
if(t>0)
{
flow[p][i]-=t;
flow[i][p]+=t;
return t;
}
}
int label =n;//设置是为了不超过真实距离
for(int i=0;i<n;i++) if(flow[p][i]>0) label=min(label,dist[i]+1);
if(--gap[dist[p]] == 0 || dist[0] >= n) return -1;//为什么是大于等于
++gap[dist[p] = label];
return 0;
}
int sap()
{
gap[0]=n;
int t=0,maxflow=0;
while((t=find_way(0))>=0)
maxflow+=t;
return maxflow;
}
int main()
{
while(scanf("%d%d",&m,&n)!=EOF)
{
memset(flow,0,sizeof(flow));//悲剧,忘了
memset(gap,0,sizeof(gap));
memset(dist,0,sizeof(dist));
for(int i=0;i<m;i++)
{
int x,y,c;
scanf("%d%d%d",&x,&y,&c);
--x;--y;
flow[x][y]+=c;
}
printf("%d/n",sap());
}
return 0;
}
- PKU 1273 Drainage Ditches
- 最大流问题 pku 1273 Drainage Ditches
- PKU-1273 Drainage Ditches (网络最大流)
- pku 1273 Drainage Ditches( Edmond-Karp最大流模板)
- pku 1273 Drainage Ditches 最大流入门基础题
- POJ 1273 Drainage Ditches
- POJ 1273 Drainage Ditches
- POJ 1273 Drainage Ditches
- poj 1273 Drainage Ditches
- poj 1273 Drainage Ditches
- POJ 1273 Drainage Ditches
- OPENJUDGE 1273 DRAINAGE DITCHES
- POJ 1273 Drainage Ditches
- POJ-1273-Drainage Ditches
- poj 1273 Drainage Ditches
- POJ 1273 Drainage Ditches
- poj 1273 Drainage Ditches
- POJ 1273 Drainage Ditches
- 算法导论学习笔记-第十四章-数据结构的扩张
- 使用crossdomain.xml让Flash可以跨域传输数据
- 误删 libc.so.6的解决方法
- MFC中替换指定的字符串
- [转]使用 VS2010 在 SQL 2008 R2 上进行应用开发
- PKU 1273 Drainage Ditches
- DOS命令大全(经典收藏)
- 为你写诗
- WM5.0中添加弹出菜单(即上下文菜单)
- 如何做好售前技术支持工作(转载)
- 习题 ct5_3: 恶魔数字7★
- matlab中用于小数取整的函数的用法
- 在SipServlet中使用SipSession或SipApplicationSession来处理UA状态的改变
- Silverlight页面点击按钮,退出应用程序