算术编码（Arithmetic Coding）源代码
来源：互联网 发布：lol服务器ip 端口 编辑：程序博客网 时间：2024/05/16 08:28
Ian H. Witten、Radford M. Neal和John G. Cleary在1987年发表了一篇启发性的论文。论文中描述了一种基于整数运算的通用算术编码器，而且还给出了由计算错误导致的效率低下的分析。以下源代码来自于这篇论文：《基于算术编码的数据压缩》（Arithmetic Coding For Data Compression）。该论文的下载地址：http://www.sachingarg.com/compression/entropy_coding/acm87_arithmetic_coding.pdf
编码函数和解码函数的伪代码：
/* ARITHMETIC ENCODING ALGORITHM. */
/* Call encode_symbol repeatedly for each symbol in the message. */
/* Ensure that a distinguished "terminator" symbol is encoded last, then */
/* transmit any value in the range [low, high). */
encode_symbol(symbo1, cum_freq)
range = high - low
high = low + range*cum_freq[symbol-1]
low = low + range*cum-freq[symbol]
/* ARITHMETIC DECODING ALGORITHM. */
/* "Value" is the number that has been received. */
/* Continue calling decode-symbol until the terminator symbol is returned. */
decode_symbol(cum_freq)
find symbol such that
cum_freq[symbol] <= (value-low)/(high-low) < cum_freq[symbol-1]
/* This ensures that value lies within the new */
/* [low, high) range that will be calculated by */
/* the following lines of code. */
range = high - low
high = low + range*cum_freq[symbol-1]
low = low + range*cum_freq[symbol]
return symbol
算术编码器和解码器的C语言实现：
arithmetic_coding.h
─────────────────────────────────────────
/* DECLARATIONS USED FOR ARITHMETIC ENCODING AND DECODING */
/* SIZE OF ARITHMETIC CODE VALUES. */
#define Code_value_bits 16 /* Number of bits in a code value */
typedef long code_value; /* Type of an arithmetic code value */
#define Top_value (((long)1<<Code_value_bits)-1) /* Largest code value */
/* HALF AND QUARTER POINTS IN THE CODE VALUE RANGE. */
#define First_qtr (Top_value/4+1) /* Point after first quarter */
#define Half (2*First_qtr) /* Point after first half */
#define Third_qtr (3*First_qtr) /* Point after third quarter */
─────────────────────────────────────────
model.h
─────────────────────────────────────────
/* INTERFACE TO THE MODEL. */
/* THE SET OF SYMBOLS THAT MAY BE ENCODED. */
#define No_of_chars 256 /* Number of character symbols */
#define EOF_symbol (No_of_chars+1) /* Index of EOF symbol */
#define No_of_symbols (No_of_chars+1) /* Total number of symbols */
/* TRANSLATION TABLES BETWEEN CHARACTERS AND SYMBOL INDEXES. */
int char_to_index[No_of_chars]; /* To index from character */
unsigned char index_to_char[No_of_symbols+1]; /* To character from index */
/* CUMULATIVE FREQUENCY TABLE. */
#define Max_frequency 16383 /* Maximum allowed frequency count */
/* 2^14 - 1 */
int cum_freq[No_of_symbols+1]; /* Cumulative symbol frequencies */
─────────────────────────────────────────
encode.c
─────────────────────────────────────────
/* MAIN PROGRAM FOR ENCODING. */
#include <stdio.h>
#include "model.h"
main()
{ start_model(); /* Set up other modules. */
start_outputing_bits();
start_encoding();
for (;;) { /* Loop through characters. */
int ch; int symbol;
ch = getc(stdin); /* Read the next character. */
if (ch==EOF) break; /* Exit loop on end-of-file. */
symbol = char_to_index[ch]; /* Translate to an index. */
encode_symbol(symbol,cum_freq); /* Encode that symbol. */
update_model(symbol); /* Update the model. */
}
encode_symbol(EOF_symbol,cum_freq); /* Encode the EOF symbol. */
done_encoding(); /* Send the last few bits. */
done_outputing_bits();
exit(0);
}
─────────────────────────────────────────
arithmetic_encode.c
─────────────────────────────────────────
/* ARITHMETIC ENCODING ALGORITHM. */
#include "arithmetic_coding.h"
static void bit_plus_follow(); /* Routine that follows */
/* CURRENT STATE OF THE ENCODING. */
static code_value low, high; /* Ends of the current code region */
static long bits_to_follow; /* Number of opposite bits to output after */
/* the next bit. */
/* START ENCODING A STREAM OF SYMBOLS. */
start_encoding()
{ low = 0; /* Full code range. */
high = Top_value;
bits_to_follow = 0; /* No bits to follow next. */
}
/* ENCODE A SYMBOL. */
encode_symbol(symbol,cum_freq)
int symbol; /* Symbol to encode */
int cum_freq[]; /* Cumulative symbol frequencies */
{ long range; /* Size of the current code region */
range = (long)(high-low)+1;
high = low + /* Narrow the code region */
(range*cum_freq[symbol-1])/cum_freq[0]-1; /* to that allotted to this */
low = low + /* symbol. */
(range*cum_freq[symbol])/cum_freq[0];
for (;;) { /* Loop to output bits. */
if (high<Half) {
bit_plus_follow(0); /* Output 0 if in low half. */
}
else if (low>=Half) { /* Output 1 if in high half.*/
bit_plus_follow(1);
low -= Half;
high -= Half; /* Subtract offset to top. */
}
else if (low>=First_qtr /* Output an opposite bit */
&& high<Third_qtr) { /* later if in middle half. */
bits_to_follow += 1;
low -= First_qtr; /* Subtract offset to middle*/
high -= First_qtr;
}
else break; /* Otherwise exit loop. */
low = 2*low;
high = 2*high+1; /* Scale up code range. */
}
}
/* FINISH ENCODING THE STREAM. */
done_encoding()
{ bits_to_follow += 1; /* Output two bits that */
if (low<First_qtr) bit_plus_follow(0); /* select the quarter that */
else bit_plus_follow(1); /* the current code range */
} /* contains. */
/* OUTPUT BITS PLUS FOLLOWING OPPOSITE BITS. */
static void bit_plus_follow(bit)
int bit;
{ output_bit(bit); /* Output the bit. */
while (bits_to_follow>0) {
output_bit(!bit); /* Output bits_to_follow */
bits_to_follow -= 1; /* opposite bits. Set */
} /* bits_to_follow to zero. */
}
─────────────────────────────────────────
decode.c
─────────────────────────────────────────
/* MAIN PROGPAM FOR DECODING. */
#include <stdio.h>
#include "model.h"
main ()
{ start_model(); /* Set up other modules. */
start_inputing_bits();
start_decoding();
for (;;) { /* Loop through characters. */
int ch; int symbol;
symbol = decode_symbol(cum_freq); /* Decode next symbol. */
if (symbol==EOF_symbol) break; /* Exit loop if EOF symbol. */
ch = index_to_char[symbol]; /* Translate to a character.*/
putc(ch,stdout); /* Write that character. */
update_model(symbol); /* Update the model. */
}
exit(0);
}
─────────────────────────────────────────
arithmetic_decode.c
─────────────────────────────────────────
/* ARITHMETIC DECODING ALGORITHM. */
#include "arithmetic_coding.h"
/* CURRENT STATE OF THE DECODING. */
static code_value value; /* Currently-seen code value */
static code_value low, high; /* Ends of current code repion */
/* START DECODING A STREAM OF SYMBOLS. */
start_decoding()
{ int i;
value = 0; /* Input bits to fill the */
for (i = 1; i<=Code_value_bits; i++) { /* code value. */
value = 2*value+input_bit();
}
low = 0; /* Full code range. */
high = Top_value;
}
/* DECODE THE NEXT SYMBOL. */
int decode_symbol(cum_freq)
int cum_freq[]; /* Cumulative symbol frequencies */
{ long range; /* Size of current code region */
int cum; /* Cumulative frequency calculated */
int symbol; /* Symbol decoded */
range = (long)(high-low)+1;
cum = /* Find cum freq for value. */
(((long)(value-low)+1)*cum_freq[0]-1)/range;
for (symbol = 1; cum_freq[symbol]>cum; symbol++) ; /* Then find symbol. */
high = low + /* Narrow the code region */
(range*cum_freq[symbol-1])/cum_freq[0]-1; /* to that allotted to this */
low = low + /* symbol. */
(range*cum_freq[symbol])/cum_freq[0];
for (;;) { /* Loop to get rid of bits. */
if (high<Half) {
/* nothing */ /* Expand low half. */
}
else if (low>=Half) { /* Expand high half. */
value -= Half;
low -= Half; /* Subtract offset to top. */
high -= Half;
}
else if (low>=First_qtr /* Expand middle half. */
&& high<Third_qtr) {
value -= First_qtr;
low -= First_qtr; /* Subtract offset to middle*/
high -= First_qtr;
}
else break; /* Otherwise exit loop. */
low = 2*low;
high = 2*high+1; /* Scale up code range. */
value = 2*value+input_bit(); /* Move in next input blt. */
}
return symbol;
}
bit_input.c
─────────────────────────────────────────
/* BIT INPUT ROUTINES. */
#include <stdio.h>
#include "arithmetic_coding.h"
/* THE BIT BUFFER. */
static int buffer; /* Bits waiting to be input */
static int bits_to_go; /* Number of bits still in buffer */
static int garbage_bits; /* Number of bits past end-of-file */
/* INITIALIZE BIT INPUT. */
start_inputing_bits()
{ bits_to_go = 0; /* Buffer starts out with */
garbage_bits = 0; /* no bits in it. */
}
/* INPUT A BIT. */
int input_bit()
{ int t;
if (bits_to_go==0) { /* Read the next byte if no */
buffer = getc(stdin); /* bits are left in buffer. */
if (buffer==EOF) {
garbage_bits += 1; /* Return arbitrary bits*/
if (garbage_bits>Code_value_bits-2) { /* after eof, but check */
fprintf(stderr,"Bad input file/n"); /* for too many such. */
exit(-1);
}
}
bits_to_go = 8;
}
t = buffer&1; /* Return the next bit from */
buffer >>= 1; /* the bottom of the byte. */
bits_to_go -= 1;
return t;
}
─────────────────────────────────────────
bit_output.c
─────────────────────────────────────────
/* BIT OUTPUT ROUTINES. */
#include <stdio.h>
/* THE BIT BUFFER. */
static int buffer; /* Bits buffered for output */
static int bits_to_go; /* Number of bits free in buffer */
/* INITIALIZE FOR BIT OUTPUT. */
start_outputing_bits()
{ buffer = 0; /* Buffer is empty to start */
bits_to_go = 8; /* with. */
}
/* OUTPUT A BIT. */
output_bit(bit)
int bit;
{ buffer >>= 1; /* Put bit in top of buffer.*/
if (bit) buffer |= 0x80;
bits_to_go -= 1;
if (bits_to_go==0) { /* Output buffer if it is */
putc(buffer,stdout); /* now full. */
bits_to_go = 8;
}
}
/* FLUSH OUT THE LAST BITS. */
done_outputing_bits()
{ putc(buffer>>bits_to_go,stdout);
}
─────────────────────────────────────────
静态模型和自适应模型的程序调用：
fixed_model.c
─────────────────────────────────────────
/* THE FIXED SOURCE MODEL */
#include "model.h"
int freq[No_of_symbols+1] = (
0,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 124, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
/* ! " # $ % & ' ( ) * + , - . / */
1236, 1, 21, 9, 3, 1, 25, 15, 2, 2, 2, 1, 79, 19, 60, 1,
/* 0 1 2 3 4 5 6 7 8 9 : ; < = > ? */
15, 15, 8, 5, 4, 7, 5, 4, 4, 6, 3, 2, 1, 1, 1, 1,
/* @ A B C D E F G H I J K L M N O */
1, 24, 15, 22, 12, 15, 10, 9, 16, 16, 8, 6, 12, 23, 13, 11,
/* P Q R S T U V W X Y Z [ / ] ^ _ */
14, 1, 14, 28, 29, 6, 3, 11, 1, 3, 1, 1, 1, 1, 1, 3,
/* ' a b c d e f g h i j k l m n o */
1, 491, 85, 173, 232, 744, 127, 110, 293, 418, 6, 39, 250, 139, 429, 446,
/* p q r s t u v w x y z { | } ~ */
111, 5, 388, 375, 531, 152, 57, 97, 12, 101, 5, 2, 1, 2, 3, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1
};
/* INITIALIZE THE MODEL. */
start_model()
{ int 1;
for (i = 0; i<No_of_chars; i++) { /* Set up tables that */
char_to_index[i] = i+1; /* translate between symbol */
index_to_char[i+1] = i; /* indexes and characters. */
}
cum_freq[No_of_symbols] = 0;
for (i = No_of_symbols; i>0; i--) { /* Set up cumulative */
cum_freq[i-1] = cum_freq[i] + freq[i]; /* frequency counts. */
}
if (cum_freq[0] > Max_frequency) abort(); /* Check counts within limit*/
}
/* UPDATE THE MODEL TO ACCOUNT FOR A NEW SYMBOL. */
update_model(symbol)
int symbol;
{ /* Do nothing. */
}
─────────────────────────────────────────
adaptive_model.c
─────────────────────────────────────────
/* THE ADAPTIVE SOURCE MODEL */
#include "modol.h"
int freq[No_of_symbols+1]; /* symbol frequencies */
/* INITIALIZE THE MODEL. */
start_model()
{ int i;
for (i = 0; i<No_of_chars; i++) { /* Set up tables that */
char_to_index[i] = i+1; /* translate between symbol */
index_to_char[i+1] = i; /* indexes and characters. */
}
for (i = 0; i<=No_of_symbols; i++) { /* Set up initial frequency */
freq[i] = 1; /* counts to be one for all */
cum_freq[i] = No_of_symbols-i; /* symbols. */
}
freq[0] = 0; /* Freq[0] must not be the */
} /* same as freq[1]. */
/* UPDATE THE MODEL TO ACCOUNT FOR A NEW SYMBOL. */
update_model(symbol)
int symbol; /* Index of new symbol */
{ int i; /* New index for symbol */
if (cum_freq[0]==Max_frequency) { /* See if frequency counts */
int cum; /* are at their maximum. */
cum = 0;
for (i = No_of_symbols; i>=0; i--) { /* If so, halve all the */
freq[i] = (freq[i]+1)/2; /* counts (keeping them */
cum_freq[i] = cum; /* non-zero). */
cum += freq[i];
}
}
for (i = symbol; freq[i]==freq[i-1]; i--) ; /* Find symbol's new index. */
if (i<symbol) {
int ch_i, ch_symbol;
ch_i = index_to_char[i]; /* Update the translation */
ch_symbol = index_to_char[symbol]; /* tables if the symbol has */
index_to_char[i] = ch_symbol; /* moved. */
index_to_char[symbol] = ch_i;
char_to_index[ch_i] = symbol;
char_to_index[ch_symbol] = i;
}
freq[i] += 1;
while (i>0) { /* Increment the frequency */
i -= 1; /* count for the symbol and */
cum_freq[i] += 1; /* update the cumulative */
} /* frequencies. */
}
- 算术编码（Arithmetic Coding）源代码
- 【数据压缩】算术编码ARITHMETIC CODING
- 熵编码 之 2. Arithmetic coding
- Arithmetic coding
- arithmetic coding
- numpy 算术运算（Arithmetic operations）
- bash之算术扩展（arithmetic expansion）
- Arithmetic coding and haffman coding
- UVa Problem 10035 Primary Arithmetic （小学生算术）
- 算术运算符(Arithmetic Operators)
- 霍夫曼编码（Huffman Coding）
- Sparse coding（稀疏编码）
- 霍夫曼编码（Huffman Coding）
- Huffuman Coding（哈夫曼编码）
- 算术编码
- 算术编码
- 算术编码
- 算术编码
- 【Seo技巧】高质量链接的十大特征
- 各种进程 守护进程 孤儿进程 僵尸进程
- CSS教程：彻底掌握Z-index属性
- 鼠标移到任务栏滚轮调节音量
- Open-source ARM simulators
- 算术编码（Arithmetic Coding）源代码
- Zend_Json的使用
- dba要做的事
- android google map 开发笔记
- Eddie Liu memorable New Year
- JS同源策略
- The question that you should ask yourself everyday
- Oracle的UTL_FILE.FOPEN的用法
- ofstream & ifstream
