嵌入式linux启动信息完全注释
来源:互联网 发布:java web编程宝典 编辑:程序博客网 时间:2024/05/29 21:35
Linux version 2.4.20-uc0 (root@Local) (gcc version 2.95.3
20010315 (release)(ColdFire patches - 20010318 from http://f
(uClinux XIP and shared lib patches from http://www.snapgear.com/)) #20 三 6月 1
8 00:58:31 CST 2003
Processor: Samsung S3C4510B revision 6
Architecture: SNDS100
On node 0 totalpages: 4096
zone(0): 0 pages.
zone(1): 4096 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/rom0
Calibrating delay loop... 49.76 BogoMIPS
Memory: 16MB = 16MB total
Memory: 14348KB available (1615K code, 156K data, 40K init)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1,
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Samsung S3C4510 Serial driver version 0.9 (2001-12-27) with no serial options en
abled
ttyS00 at 0x3ffd000 (irq = 5) is a S3C4510B
ttyS01 at 0x3ffe000 (irq = 7) is a S3C451
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 1 disk images:
0: BE558-1A5D57 [VIRTUAL BE558-1A5D57] (RO)
RAMDISK driver initialized: 16 RAM disks of 1024K size 1024 blocksize
Samsung S3C4510 Ethernet driver version 0.1 (2002-02-20) <mac@os.nctu.edu.tw>
eth0: 00:40:95:36:35:34
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 1024)
VFS: Mounted root (romfs
Freeing init memory: 40K
Boot loader v0.12
Loaded to 0x90060000
Found boot configuration
Booted from parallel flash
CPU clock rate: 200 MHz
DRAM size is 128MB (128MB/0MB)
先说明一下内存地址数字情况,主要是为了方便记忆。
ROMFS found at 0x46040000, Volume name = rom 43f291aa
File linux.bin.gz found
Unzipping image from 0x4639DE60 to 0x90090000, size = 1316021
Inptr = 0x00000014(20)
Outcnt = 0x0030e7c8(3205064)
Boot kernel at 0x90090000 with ROMFS at 0x46040000
Press 'enter' to boot
Linux version 2.4.22-uc0 (root@local) (gcc version 2.95.3 20010315 (release)) #33 .?1.. 20 12:09:106
Found bootloader memory map at 0x10000fc0.
Processor: ARM pt110 revision 0
On node 0 totalpages: 20480
Kernel command line: root=/dev/mtdblock3
Console: colour dummy device 80x30
serial_xx: setup_console @ 115
Calibrating delay loop... 82.94 BogoMIPS
Memory: 80MB = 80MB total
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
PCI: bus0: Fast back to back transfers disabled
Linux NET4.0 for Linux 2.4
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
pty: 256 Unix98 ptys configured
loop: loaded (max 8 devices)
8139too Fast Ethernet driver 0.9.27
SCSI subsystem driver Revision: 1.00
mumk_register_tasklet: (1) tasklet 0x905bf9c0 status @0x9025e974
Probing XX Flash Memory
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
Using buffer write method
Creating 3 MTD partitions on "XX mapped flash":
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
cramfs: wrong magic
2.4
2.6
FAT: bogus logical sector size 21072
UMSDOS: msdos_read_super failed, mount aborted.
VFS: Mounted root (romfs filesystem) readonly
Mounted devfs on /dev
Freeing init memory: 72K
你可以用进程查看命令来验证
- 嵌入式linux启动信息完全注释
- 嵌入式linux启动信息完全注释
- 嵌入式linux启动信息完全注释
- 嵌入式linux启动信息完全注释
- 嵌入式linux启动信息完全注释
- 嵌入式linux启动信息完全注释
- 嵌入式linux启动信息完全注释
- 嵌入式linux启动信息完全注释
- 嵌入式linux启动信息完全注释
- 嵌入式linux启动信息完全注释
- [转帖]嵌入式linux启动信息完全注释
- 嵌入式linux启动信息完全注释
- 嵌入式linux启动信息完全注释
- 嵌入式linux启动信息完全注释
- 嵌入式linux启动信息完全注释
- 嵌入式linux启动信息完全注释
- 嵌入式linux启动信息完全注释
- 嵌入式linux启动信息完全注释
- s3c2440启动文件分析
- 使用gdb来调试嵌入式系统
- arm linux内核启动大致流程
- ARM-linux的启动流程
- 感受
- 嵌入式linux启动信息完全注释
- ARM入门最好的文章
- C语言程序编译的内存分配,堆与栈的区别
- 嵌入式编程语言的最新发展
- arm(44b0x)无痛苦起步(转)强烈推荐!!!!
- Linux内核启动流程
- 深入理解linux启动过程
- Xslt开发中善用<xsl:comment/>
- 剖析Linux系统启动过程